BOL: Related items

Rajiv Gandhi Centre for Biotechnology (RGCB) invites applications for the following three faculty scientist

Tue, 24 Nov 2015 22:13:16 -0600

Scientist Positions
Advt. No.RGCB Advt./SCI 2015/1

November 11, 2015

Rajiv Gandhi Centre for Biotechnology (RGCB) invites applications for the following three faculty scientist positions:

Scientist E-II or F in Bioinformatics & Computational Biology

SCIENTIST E-II OR F IN COMPUTATIONAL BIOLOGY & BIOINFORMATICS

Highly motivated and innovative individual who will pursue basic research, solve biological problems with emphasis on computational and quantitative experimental methods and build active bridges to translational research. The scientist will also provide computational biology support to ongoing research programs in disease biology, provide assistance to analyze complex data sets generated by RGCB scientists and collaborators inclusive of including high dimensional “omics” data and next generation sequencing data, such as whole genome, exome, RNA-seq and ChIP-seq as well as provide leadership for high quality training for junior scientists and regular teaching programs of the institute. Areas of research of interest to RGCB include but are not limited to computational, systems, or quantitative biology with applications to cell biology, developmental biology, metabolism, genomics, proteomics, biophysics, biological information systems, network pharmacology, drug design and cancer research. The scientist’s responsibilities include efforts for the integration of DNA variant annotation with statistical genetic analysis methods including linkage, imputation and association methods, adopting novel and innovative methodologies to analyze, integrate and interpret high dimensional data sets, provision of annotation to robust genetics and genomics findings using several data sources and methods, data management of exploratory clinical and R&D studies in partnership with other lines of genetic data generated from internal and external studies, delivery and documentation of genomic information to support genetic studies, ensuring high-quality genetic and genomic data is incorporated into exploratory- clinical research programs, developing tools that make maximum use of multiple data sources to support annotation of DNA variation and contributes to systems biology initiatives within RGCB

More at http://rgcb.res.in/scientist-positions/

Application Form http://rgcb.res.in/wp-content/uploads/2015/11/APPLICATION-FORMAT-FOR-SCIENTISTS.docx

Alignment of closely related whole genomes/scaffolds

Rahul Nayak — Fri, 29 Jan 2016 10:37:27 -0600

With the relative ease and low cost of current generation sequencing technologies has led to a dramatic increase in the number of sequenced genomes for species across the tree of life. This increasing volume of data requires tools that can quickly compare multiple whole-genome sequences, millions of base pairs in length, to aid in the study of populations, pan-genomes, and genome evolution.This bookmaks have been created to report new tools for whole genome alignments.

Please report new whole genome alignment tools under comment sections.

Address of the bookmark: http://www.cs.utoronto.ca/~brudno/721.full.pdf

Stacks

Jitendra Narayan — Wed, 24 Feb 2016 15:52:30 -0600

Stacks is a software pipeline for building loci from short-read sequences, such as those generated on the Illumina platform. Stacks was developed to work with restriction enzyme-based data, such as RAD-seq, for the purpose of building genetic maps and conducting population genomics and phylogeography.

More at http://catchenlab.life.illinois.edu/stacks/

Address of the bookmark: http://catchenlab.life.illinois.edu/stacks/

BioinfoLab

Fri, 25 Mar 2016 11:05:35 -0500

Laboratory of Statistics and Computational tools for Bioinformatics

The Laboratory of Statistics and Computational tools for Bioinformatics (BioinfoLab) is hosted at the Istituto per le Applicazioni del Calcolo "Mauro Picone" - CNR . The laboratory has been officially opened in 2012 with the support of Programma Operativo Nazionale "Ricerca e Competitività" 2007-2013 (PON "R&C"), and it incorporates several expertise and research activities started since 2007, and supported by several CNR projects. Main interest of BioinfoLab is to develop novel statistical methods and computational tools for the analysis of high dimensional data arising from "Multi-omics" applications. In particular, current activities involve the analysis of ChIP-seq and RNA-seq experiments.

More at http://bioinfo.na.iac.cnr.it/BioinfoLab/index.html

RACA: Reference-Assisted Chromosome Assembly

Priya Singh — Wed, 06 Apr 2016 09:29:50 -0500

Rreference-Assisted Chromosome Assembly (RACA), an algorithm to reliably order and orient sequence scaffolds generated by NGS and assemblers into longer chromosomal fragments using comparative genome information and paired-end reads.

http://www.ncbi.nlm.nih.gov/pubmed/23307812

http://bioen-compbio.bioen.illinois.edu/RACA/

Address of the bookmark: http://bioen-compbio.bioen.illinois.edu/RACA/

DISCOVAR

Abhimanyu Singh — Mon, 18 Apr 2016 11:59:16 -0500

DISCOVAR is a new variant caller and DISCOVAR de novo a new genome assembler, both designed for state-of-the-art data. Their inputs are chosen to optimize quality while keeping costs low. Currently it takes as input Illumina reads of length 250 or longer — produced on MiSeq or HiSeq 2500 — and from a single PCR-free library. These data enable a level of completeness and continuity that was not previously possible.

DISCOVAR can call variants on a region by region basis, potentially tiling an entire large genome. DISCOVAR variant calling is under active development and transitioning to VCF.

DISCOVAR de novo can generate de novo assemblies for both large and small genomes. It currently does not call variants.

More at https://www.broadinstitute.org/software/discovar/blog/?page_id=14

Address of the bookmark: https://www.broadinstitute.org/software/discovar/blog/

ALE: a Generic Assembly Likelihood Evaluation Framework for Assessing the Accuracy of Genome and Metagenome Assemblies

Neel — Tue, 26 Apr 2016 03:38:43 -0500

Assembly Likelihood Evaluation (ALE) framework that overcomes these limitations, systematically evaluating the accuracy of an assembly in a reference-independent manner using rigorous statistical methods. This framework is comprehensive, and integrates read quality, mate pair orientation and insert length (for paired-end reads), sequencing coverage, read alignment and k-mer frequency. ALE pinpoints synthetic errors in both single and metagenomic assemblies, including single-base errors, insertions/deletions, genome rearrangements and chimeric assemblies presented in metagenomes. At the genome level with real-world data, ALE identifies three large misassemblies from the Spirochaeta smaragdinae finished genome, which were all independently validated by Pacific Biosciences sequencing. At the single-base level with Illumina data, ALE recovers 215 of 222 (97%) single nucleotide variants in a training set from a GC-rich Rhodobacter sphaeroides genome. Using real Pacific Biosciences data, ALE identifies 12 of 12 synthetic errors in a Lambda Phage genome, surpassing even Pacific Biosciences' own variant caller, EviCons. In summary, the ALE framework provides a comprehensive, reference-independent and statistically rigorous measure of single genome and metagenome assembly accuracy, which can be used to identify misassemblies or to optimize the assembly process.

More at http://www.ncbi.nlm.nih.gov/pubmed/23303509

Address of the bookmark: http://sc932.github.io/ALE/about.html

RASTtk : algorithm for building custom annotation pipelines and annotating batches of genomes

Abhi — Wed, 27 Apr 2016 11:07:59 -0500

The RAST (Rapid Annotation using Subsystem Technology) annotation engine was built in 2008 to annotate bacterial and archaeal genomes. It works by offering a standard software pipeline for identifying genomic features (i.e., protein-encoding genes and RNA) and annotating their functions. Recently, in order to make RAST a more useful research tool and to keep pace with advancements in bioinformatics, it has become desirable to build a version of RAST that is both customizable and extensible. In this paper, we describe the RAST tool kit (RASTtk), a modular version of RAST that enables researchers to build custom annotation pipelines. RASTtk offers a choice of software for identifying and annotating genomic features as well as the ability to add custom features to an annotation job. RASTtk also accommodates the batch submission of genomes and the ability to customize annotation protocols for batch submissions. This is the first major software restructuring of RAST since its inception.

More at http://www.nature.com/articles/srep08365

Address of the bookmark: http://rast.nmpdr.org/

Platanus

Jit — Fri, 13 May 2016 05:12:40 -0500

Platanus is a novel de novo sequence assembler that can reconstruct genomic sequences of
highly heterozygous diploids from massively parallel shotgun sequencing data.

The latest version is 1.2.4.

To cite Platanus, please use the following:

Kajitani R, Toshimoto K, Noguchi H, Toyoda A, Ogura Y, Okuno M, Yabana M, Harada M, Nagayasu E, Maruyama H, Kohara Y, Fujiyama A, Hayashi T, Itoh T, “Efficient de novo assembly of highly heterozygous genomes from whole-genome shotgun short reads”. Genome Res. 2014 Aug;24(8):1384-95. doi: 10.1101/gr.170720.113. [abstract | full text]

Address of the bookmark: http://platanus.bio.titech.ac.jp/

Stampy

Abhi — Fri, 20 May 2016 19:13:32 -0500

Stampy is a package for the mapping of short reads from illumina sequencing machines onto a reference genome. It's recommended for most workflows, including those for genomic resequencing, RNA-Seq and Chip-seq. Stampy excels in the mapping of reads containing that contain sequence variation relative to the reference, in particular for those containing insertions or deletions.

Address of the bookmark: http://www.well.ox.ac.uk/project-stampy