Since ASCIIGenome does not require a graphical interface it is particularly useful for quickly visualizing genomic data on remote servers while offering flexibility similar to popular GUI viewers like IGV.

Documentation is at readthedocs/asciigenome.

Address of the bookmark: https://github.com/dariober/ASCIIGenome

https://github.com/marbl/meryl

Address of the bookmark: https://github.com/marbl/merqury

• Draft assembly fasta file
• Interleaved linked reads file (Barcode sequence expected in the BX tag of the read header or in the form "@readname_barcode" ; Run Long Ranger basic on raw chromium reads to produce this interleaved file)

Address of the bookmark: https://github.com/bcgsc/ARCS/

The Program first constructs all exact match pairs by a suffix-array based algorithm and extends them to long highly similar pairs. Then Smith-Waterman algorithm is used to adjust the ends of LTR pair candidates to get alignment boundaries. These boundaries are subject to re-adjustment using supporting information of TG..CA box and TSRs and reliable LTRs are selected. Next, LTR_FINDER tries to identify PBS, PPT and RT inside LTR pairs by build-in aligning and counting modules. RT identification includes a dynamic programming to process frame shift. For other protein domains, LTR_FINDER calls ps_scan (from PROSITE, http://www.expasy.org/prosite/) to locate cores of important enzymes if they occur.

Address of the bookmark: https://github.com/xzhub/LTR_Finder

Address of the bookmark: https://github.com/vpc-ccg/haslr

BlobToolKit is comprised of four components:

1. BlobToolKit Viewer allows browser-based interactive visualisation and filtering of preliminary or published genomic datasets even for highly fragmented assemblies.
2. BlobTools2 is a command-line program to convert assemblies and analysis results into datasets that can be further processed using BlobTools2 and/or visualised in the Viewer.
3. The BlobToolKit Specification features a formal schema and validator for the JSON-based BlobDir format used by BlobTools2 and the Viewer.
4. The BlobToolKit Pipeline is a configurable Snakemake pipeline that automates all steps from retrieving public datasets through running analyses and generating a BlobDir dataset with BlobTools2, ready for visualisation in the Viewer.

Paper https://www.biorxiv.org/content/10.1101/844852v1.full.pdf

Address of the bookmark: https://blobtoolkit.genomehubs.org/

Annotation

https://bigd.big.ac.cn/ncov/variation/annotation

Genome wharehouse 

https://bigd.big.ac.cn/gwh/browse/index

Released Genome

https://bigd.big.ac.cn/ncov/release_genome

Download data 

ftp://download.big.ac.cn/Genome/Viruses/Coronaviridae/

Raw data

https://bigd.big.ac.cn/gsa/browse/run/?tag=Coronaviridae

Address of the bookmark: https://bigd.big.ac.cn/ncov/about

where, c is the count of a k-mer from reads, m is the mode of counts of read k-mers, and n is the copy of the k-mer in the assembly.

Address of the bookmark: https://github.com/liu3zhenlab/KAD

http://docpollard.org/

Tools

http://docpollard.org/resources/software/

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD