BOL: Related items

Ancient whole genome duplication (WGD) detection tools !

Rahul Nayak — Sun, 07 Mar 2021 00:32:44 -0600

There are two methods for ancient WGD detection, one is collinearity analysis, and the other is based on the Ks distribution map. Among them, Ks is defined as the average number of synonymous substitutions at each synonymous site, and there is also a Ka corresponding to it, which refers to the average number of non-synonymous substitutions at each non-synonymous site.

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

For more reading - There are 9 sub-modules in WGD

kde: KDE fitting to the Ks distribution
ksd: Ks distribution construction
mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
mix: Hybrid modeling of Ks distribution.
pre: preprocess the CDS file
syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
viz: draw histogram and density plot
wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

Short-read assembly using Spades !

Abhimanyu Singh — Mon, 31 Jan 2022 07:18:16 -0600

If we only had Illumina reads, we could also assemble these using the tool Spades.

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

illumina_R1.fastq.gz: the Illumina forward reads
illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

-1 is input file of forward reads
-2 is input file of reverse reads
--careful minimizes mismatches and short indels
--cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
-o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

Mitochondrial genome assembly tools !

Abhi — Wed, 06 Sep 2023 00:37:18 -0500

Mitochondrial genome assembly tools are specialized software and algorithms designed to accurately reconstruct the mitochondrial genome (mitogenome) from sequencing data, typically obtained through techniques like next-generation sequencing (NGS). The mitochondrial genome is relatively small compared to the nuclear genome, making it an ideal target for assembly. Here are some commonly used mitochondrial genome assembly tools:

MitoFinder: Mitofinder is a pipeline to assemble mitochondrial genomes and annotate mitochondrial genes from trimmed read sequencing data.

MitoHiFi: a python pipeline for mitochondrial genome assembly from PacBio high fidelity reads

MITObim: MITObim is a tool specifically developed for the iterative assembly of mitochondrial genomes. It starts with a reference mitogenome and iteratively refines the assembly using the read data.

MITOS: MITOS is a web-based platform that provides a pipeline for annotating mitochondrial genomes. It integrates multiple software tools for assembly, annotation, and visualization of mitogenomes.

MIRA: MIRA (Mimicking Intelligent Read Assembly) is a versatile genome assembly tool that can be used for mitochondrial genome assembly. It supports various sequencing technologies and allows for reference-based or de novo assembly.

NOVOPlasty: NOVOPlasty is a user-friendly tool designed for de novo assembly of organelle genomes, including mitochondria. It utilizes a seed-and-extend algorithm and is suitable for both short-read and long-read data.

MITOS2: MITOS2 is an updated version of the MITOS pipeline, which automates the annotation of mitochondrial genomes. It provides improved accuracy and additional features for mitochondrial genome analysis.

GetOrganelle: While primarily designed for chloroplast genome assembly, GetOrganelle can also be used for mitochondrial genome assembly. It is particularly useful for dealing with high-throughput sequencing data.

SPAdes: SPAdes (St. Petersburg genome assembler) is a versatile genome assembly tool that can be employed for mitochondrial genome assembly, especially when dealing with complex datasets that may contain nuclear mitochondrial DNA sequences (numts).

IDBA-UD: IDBA-UD (Iterative De Bruijn Graph De Novo Assembler) is another de novo assembly tool that can be used for mitochondrial genome assembly, especially in cases with relatively low coverage.

Velvet: Velvet is a de novo assembly tool that can be applied to mitochondrial genome assembly, especially when working with short-read data.

When selecting a mitochondrial genome assembly tool, it's important to consider the specific characteristics of your sequencing data, such as read length and coverage, as well as the complexity of the mitochondrial genome. Additionally, some tools are better suited for specific organisms or research objectives, so choosing the right tool will depend on your particular project requirements.

Genetic Test in India

Rahul Agarwal — Sun, 11 Aug 2013 10:54:35 -0500

1.Xcode Life Sciences Pvt. Ltd.
6B, Eldorado,
112, Nungambakkam High Road,
Nungambakkam, Chennai 600034
Tamil Nadu, India

2.Mapmygenome™
Royal Demeure,HUDA Techno Enclave,
Plot No. 12/2, Sector-1 500 081
Madhapur,Hyderabad
AP, India

3. DNA Labs India

http://www.dnalabsindia.com/lab.php

4.MedGenome Labs Pvt Ltd
(Division of SciGenom Labs Pvt Ltd.)
Plot no: 43A,SDF, 3rd floor
A Block,CSEZ, Kakanad, Cochin
Kerala - 682037
Phone: 0484 - 2413399
Fax: 0484 - 2413398
Email: info@medgenome.com

5.Narayana Nethralaya

Narayana Hrudayalaya Campus
Narayana Health City
# 258/A, Bommasandra, Hosur Road,
Bangalore - 560 099 - INDIA.
TEL: +91-80-66660655-0658
FAX: +91-80-66660650
Mobile: 9902 821128 (Emergency Only)
e-mail: info@narayananethralaya.com

6.BioAxis DNA Research Centre Private Limited
13-51,Sri Lakshmi Nagar colony,
Besides Big Bazar, Near Kamineni Hospitals
GSI Post BandalGuda (L B Nagar) Hydeabad-500068
Andhra Pradesh (India).
Phone : +91-40-24034503/+91-9246338983

7.Gene Guiide

8th Floor, Embassy Towers, 7 Bungalows Rd, Versova, Andheri West, Mumbai-61
09167 117799
info@geneguiide.com

See more at: http://www.geneguiide.com

8.INDIAN BIOSCIENCES
Regd. Office:
G-2 (Ground Floor Rear), Kailash Colony, New Delhi - 110048, India.
Phone: +91 (0)11 29236088, Email: info@inbdna.com.

9.SRL Limited

GP-26, MARUTI INDUSTRIAL ESTATE,

UDYOG VIHAR,SECTOR-18,

GURGAON - 122015

Tel: 0124-3001243 / 0124-3001209

SRL Limited
VASANT VIHAR, 8, PALAM MARG,
NEW DELHI - 110057
Tel: 011 - 4229 5333

Website: http://www.srlworld.com
National Customer care number:
Call Toll Free : 1800-222-660/1800-102-8282
E-mail id: customercare@srl.in

10.Tata Memorial Centre,

Advanced Centre for Treatment, Research and Education in Cancer

Kharghar, Navi Mumbai - 410 210, INDIA.

Tel: +91-22-2740 5000

Fax: +91-22-2740 5085

E-mail: mail@actrec.gov.in

320000 viruses in mammals yet to sequenced in future!!!

Rahul Agarwal — Tue, 03 Sep 2013 08:35:30 -0500

With current biological technique improvements, finally it is now possible to look at millions of unknown viruses at genomic level and understand the mechanism. According to available data, close to 70 per cent of emerging viral diseases such as HIV/AIDS, West Nile, Ebola, SARS, and influenza, are zoonoses - infections of animals that cross into humans.

To address the challenges of describing and estimating virodiversity, a team of investigators from Center for Infection and Immunity (CII) and EcoHealth Alliance began in jungles of Bangladesh - home to the flying fox.

Reference:

http://economictimes.indiatimes.com/news/news-by-industry/et-cetera/mammals-harbour-at-least-320000-new-viruses/articleshow/22253268.cms

http://www.bbc.co.uk/news/science-environment-23932400

Tigers genome sequenced

Rahul Agarwal — Tue, 17 Sep 2013 16:48:24 -0500

Fifteen scientists led by Dr Jong Bhak of Genome Research Foundation, South Korea, decoded as many as 3 billion nucleotides (organic molecules that form the basic building blocks of nucleic acids, such as DNA). They identified 20,000 genes related to various functions of the tiger.

The biggest and perhaps most fearsome of the world's big cats, the tiger, shares 95.6 percent of its DNA with humans' cute and furry companions, domestic cats.

The new research showed that big cats have genetic mutations that enabled them to be carnivores. The team also identified mutations that allow snow leopards to thrive at high altitudes.

Reference:

http://www.nbcnews.com/science/your-cat-ferocious-tigers-share-lot-95-6-percent-their-4B11182690

http://timesofindia.indiatimes.com/home/environment/flora-fauna/Gene-mapping-of-tiger-completed/articleshow/22671681.cms

Paper:

http://www.nature.com/ncomms/2013/130917/ncomms3433/full/ncomms3433.html

An entire genome written in lab

Rahul Nayak — Fri, 25 Oct 2013 09:43:03 -0500

This is the first time ever the genetic code has been fundamentally changed. The breakthrough is a huge step forward in synthetic biology and opens up the possibility of turning re-coded bacteria into biofactories, capable of producing potent new forms of protein that could fight disease or generate sustainable materials.

More @ http://news.yale.edu/2013/10/17/researchers-rewrite-entire-genome-and-add-healthy-twist

News Reference: Yale news

Image Source: Sciencedaily.

DNA Replication Process [3D Animation]

Sat, 10 May 2014 04:41:22 -0500

See an organised list of all the animations: http://doctorprodigious.wordpress.com/hd-animations/

methylKit

Jit — Fri, 03 Jun 2016 10:09:29 -0500

methylKit is an R package for DNA methylation analysis and annotation from high-throughput bisulfite sequencing. The package is designed to deal with sequencing data from RRBS and its variants, but also target-capture methods such as Agilent SureSelect methyl-seq. In addition, methylKit can deal with base-pair resolution data for 5hmC obtained from Tab-seq or oxBS-seq. It can also handle whole-genome bisulfite sequencing data if proper input format is provided.

Address of the bookmark: https://github.com/al2na/methylKit

DnaSP v5: a software for comprehensive analysis of DNA polymorphism data

Jit — Mon, 06 Feb 2017 04:45:37 -0600

DnaSP is a software package for a comprehensive analysis of DNA polymorphism data. Version 5 implements a number of new features and analytical methods allowing extensive DNA polymorphism analyses on large datasets. Among other features, the newly implemented methods allow for: (i) analyses on multiple data files; (ii) haplotype phasing; (iii) analyses on insertion/deletion polymorphism data; (iv) visualizing sliding window results integrated with available genome annotations in the UCSC browser.

Address of the bookmark: http://www.ub.edu/dnasp/