BOL: Related items

AutoDock Vina: an open-source program for doing molecular docking.

BioStar — Sat, 13 Jun 2020 07:55:56 -0500

AutoDock Vina is an open-source program for doing molecular docking. It was designed and implemented by Dr. Oleg Trott in the Molecular Graphics Lab at The Scripps Research Institute. It is especially effective for protein-ligand docking. AutoDock 4 is available under the GNU General Public License. AutoDock is one of the most cited docking software applications in the research community.

http://vina.scripps.edu/

Address of the bookmark: http://vina.scripps.edu/

FSA: Fast Statistical Alignment

Jit — Mon, 06 Feb 2017 04:26:01 -0600

FSA is a probabilistic multiple sequence alignment algorithm which uses a "distance-based" approach to aligning homologous protein, RNA or DNA sequences. Much as distance-based phylogenetic reconstruction methods like Neighbor-Joining build a phylogeny using only pairwise divergence estimates, FSA builds a multiple alignment using only pairwise estimations of homology. This is made possible by the sequence annealing technique for constructing a multiple alignment from pairwise comparisons, developed by Ariel Schwartz in "Posterior Decoding Methods for Optimization and Control of Multiple Alignments."

FSA brings the high accuracies previously available only for small-scale analyses of proteins or RNAs to large-scale problems such as aligning thousands of sequences or megabase-long sequences. FSA introduces several novel methods for constructing better alignments:

FSA uses machine-learning techniques to estimate gap and substitution parameters on the fly for each set of input sequences. This "query-specific learning" alignment method makes FSA very robust: it can produce superior alignments of sets of homologous sequences which are subject to very different evolutionary constraints.
FSA is capable of aligning hundreds or even thousands of sequences using a randomized inference algorithm to reduce the computational cost of multiple alignment. This randomized inference can be over ten times faster than a direct approach with little loss of accuracy.
FSA can quickly align very long sequences using the "anchor annealing" technique for resolving anchors and projecting them with transitive anchoring. It then stitches together the alignment between the anchors using the methods described above.
The included GUI, MAD (Multiple Alignment Display), can display the intermediate alignments produced by FSA, where each character is colored according to the probability that it is correctly aligned (see the picture and movie at the top of the page).

You can see more information on the FAQ.

Address of the bookmark: http://fsa.sourceforge.net/

RaGOO: Fast Reference-Guided Scaffolding of Genome Assembly Contigs

BioJoker — Wed, 17 Apr 2019 19:45:22 -0500

Alonge M, Soyk S, Ramakrishnan S, Wang X, Goodwin S, Sedlazeck FJ, Lippman ZB, Schatz MC: Fast and accurate reference-guided scaffolding of draft genomes. bioRxiv 2019.

RaGOO is a tool for coalescing genome assembly contigs into pseudochromosomes via minimap2 alignments to a closely related reference genome. The focus of this tool is on practicality and therefore has the following features:

Good performance. On a MacBook Pro using Arabidopsis data, pseudochromosome construction takes less than a minute and the whole pipeline with SV calling takes ~2 minutes.
Intact ordering and orienting of contigs.
Chimeric contig correction
GFF lift-over
Structural variant calling with and integrated version of Assemblytics
Confidence scores associated with the grouping, localization, and orientation for each contig.

Address of the bookmark: https://github.com/malonge/RaGOO

DADA2: Fast and accurate sample inference from amplicon data with single-nucleotide resolution

Jit — Tue, 10 Nov 2020 20:26:00 -0600

The DADA2 tutorial goes through a typical workflow for paired end Illumina Miseq data: raw amplicon sequencing data is processed into the table of exact amplicon sequence variants (ASVs) present in each sample.

The DADA2 Workflow on Big Data goes through workflow optimized to run on large datasets (10s of millions to billions of reads).

An ITS-specific version of the DADA2 workflow identifies and verifiably removes primers on both ends of each ITS read, a key step due to the variable length of the ITS region.

Short demonstrations of assigning taxonomy and assigning species to sequences.

Address of the bookmark: https://benjjneb.github.io/dada2/index.html

Mash: fast genome and metagenome distance estimation using MinHash

Jit — Tue, 12 Dec 2017 17:30:12 -0600

Mash is normally distributed as a dependency-free binary for Linux or OSX (see https://github.com/marbl/Mash/releases). This source distribution is intended for other operating systems or for development. Mash requires c++11 to build, which is available in and GCC >= 4.8 and OSX >= 10.7.

See http://mash.readthedocs.org for more information.

Address of the bookmark: https://github.com/marbl/Mash/releases

LAMSA: fast split read alignment with long approximate matches

Jit — Tue, 15 May 2018 04:44:42 -0500

LAMSA (Long Approximate Matches-based Split Aligner) is a novel split alignment approach with faster speed and good ability of handling SV events. It is well-suited to align long reads (over thousands of base-pairs). LAMSA takes takes the advantage of the rareness of SVs to implement a specifically designed two-step strategy. That is, LAMSA initially splits the read into relatively long fragments and co-linearly align them to solve the small variations or sequencing errors, and mitigate the effect of repeats. The alignments of the fragments are then used for implementing a sparse dynamic programming (SDP)-based split alignment approach to handle the large or non-co-linear variants. We benchmarked LAMSA with simulated and real datasets having various read lengths and sequencing error rates, the results demonstrate that it is substantially faster than the state-of-the-art long read aligners; mean-while, it also has good ability to handle various categories of SVs. LAMSA is open source and free for non-commercial use. LAMSA is mainly designed by Bo Liu & Yan Gao and developed by Yan Gao in Center for Bioinformatics, Harbin Institute of Technology, China.

Address of the bookmark: https://github.com/hitbc/LAMSA

LSC :a long read error correction tool

Jit — Thu, 02 Aug 2018 07:39:46 -0500

Getting Started

These simple steps will help you integrate LSC into your transcriptomics analysis pipeline.

Read the LSC_requirements for running LSC.
Download and set-up the LSC package.
Follow the tutorial to see how LSC works on some example data.
Read the manual if anything is unclear.
You're ready, Happy LSCing!

Latest publication

Kin Fai Au, Jason Underwood, Lawrence Lee and Wing Hung Wong
Improving PacBio Long Read Accuracy by Short Read Alignment [Manuscript]
PLoS ONE 2012. 7(10): e46679. doi:10.1371/journal.pone.0046679

Address of the bookmark: https://www.healthcare.uiowa.edu/labs/au/LSC/

P_RNA_scaffolder: a fast and accurate genome scaffolder using paired-end RNA-sequencing reads

BioStar — Fri, 07 Sep 2018 05:19:06 -0500

P_RNA_scaffolder is a novel scaffolding tool using Pair-end RNA-seq to scaffold genome fragments. The method is suitable for most genomes. The program could utilize Illumina Paired-end RNA-sequencing reads from target speciesies. Our method provides another practical alternative to existing mate-pair_based approaches or other Protein-based approaches (for instance, PEP_scaffolder ) for scaffolding genome sequences. The most important feature of this method is to improve the completeness of gene regions and long-coding gene regions (for instance, circRNA).

Address of the bookmark: http://www.fishbrowser.org/software/P_RNA_scaffolder/#

Shouji: a fast and efficient pre-alignment filter for sequence alignment

Jit — Mon, 04 Nov 2019 07:09:45 -0600

The ability to generate massive amounts of sequencing data continues to overwhelm the processing capacity of existing algorithms and compute infrastructures. In this work, we explore the use of hardware/software co-design and hardware acceleration to significantly reduce the execution time of short sequence alignment, a crucial step in analyzing sequenced genomes.

We introduce Shouji, a highly parallel and accurate pre-alignment filter that remarkably reduces the need for computationally-costly dynamic programming algorithms. The first key idea of our proposed pre-alignment filter is to provide high filtering accuracy by correctly detecting all common subsequences shared between two given sequences. The second key idea is to design a hardware accelerator design that adopts modern FPGA (field-programmable gate array) architectures to further boost the performance of our algorithm.

More at https://github.com/CMU-SAFARI/Shouji

Address of the bookmark: https://github.com/CMU-SAFARI/Shouji

RNA-Bloom: a fast and memory-efficient de novo transcript sequence assembler

LEGE — Thu, 09 Jul 2020 03:13:06 -0500

RNA-Bloom is a fast and memory-efficient de novo transcript sequence assembler. It is designed for the following sequencing data types:

single-end/paired-end bulk RNA-seq (strand-specific/agnostic)
paired-end single-cell RNA-seq (strand-specific/agnostic)
nanopore RNA-seq (PCR cDNA/direct cDNA/direct RNA)

Written by Ka Ming Nip ✉️

Address of the bookmark: https://github.com/bcgsc/RNA-Bloom