BOL: Related items

ALE: a Generic Assembly Likelihood Evaluation Framework for Assessing the Accuracy of Genome and Metagenome Assemblies

Neel — Tue, 26 Apr 2016 03:38:43 -0500

Assembly Likelihood Evaluation (ALE) framework that overcomes these limitations, systematically evaluating the accuracy of an assembly in a reference-independent manner using rigorous statistical methods. This framework is comprehensive, and integrates read quality, mate pair orientation and insert length (for paired-end reads), sequencing coverage, read alignment and k-mer frequency. ALE pinpoints synthetic errors in both single and metagenomic assemblies, including single-base errors, insertions/deletions, genome rearrangements and chimeric assemblies presented in metagenomes. At the genome level with real-world data, ALE identifies three large misassemblies from the Spirochaeta smaragdinae finished genome, which were all independently validated by Pacific Biosciences sequencing. At the single-base level with Illumina data, ALE recovers 215 of 222 (97%) single nucleotide variants in a training set from a GC-rich Rhodobacter sphaeroides genome. Using real Pacific Biosciences data, ALE identifies 12 of 12 synthetic errors in a Lambda Phage genome, surpassing even Pacific Biosciences' own variant caller, EviCons. In summary, the ALE framework provides a comprehensive, reference-independent and statistically rigorous measure of single genome and metagenome assembly accuracy, which can be used to identify misassemblies or to optimize the assembly process.

More at http://www.ncbi.nlm.nih.gov/pubmed/23303509

Address of the bookmark: http://sc932.github.io/ALE/about.html

Stampy

Abhi — Fri, 20 May 2016 19:13:32 -0500

Stampy is a package for the mapping of short reads from illumina sequencing machines onto a reference genome. It's recommended for most workflows, including those for genomic resequencing, RNA-Seq and Chip-seq. Stampy excels in the mapping of reads containing that contain sequence variation relative to the reference, in particular for those containing insertions or deletions.

Address of the bookmark: http://www.well.ox.ac.uk/project-stampy

PHYMMBL

Jit — Mon, 10 Oct 2016 08:56:34 -0500

Metagenomics sequencing projects collect samples of DNA from uncharacterized environments that may contain hundreds or even thousands of species. One of the main challenges in analyzing a metagenome is phylogenetic classification of raw sequence reads into groups representing the same or similar species. Such classification is a useful prerequisite for genome assembly and for analysis of the biological diversity present in a sample. The newest sequencing technologies have simultaneously made metagenomics easier, by making the sequencing process faster, and more difficult, by producing shorter read lengths than previous technologies. Methods for classifying sequences as short as 100 base pairs (bp) have until now been relatively inaccurate, requiring metagenomics projects to use older, long-read technologies. Phymm, a new classification approach for metagenomics data which uses interpolated Markov models (IMMs) to taxonomically classify DNA sequences, can accurately classify reads as short as 100 bp. Its accuracy for short reads represents a significant leap forward over previous composition-based classification methods. PhymmBL (rhymes with "thimble"), the hybrid classifier included in this distribution which combines analysis from both Phymm and BLAST, produces even higher accuracy.

Address of the bookmark: http://www.cbcb.umd.edu/software/phymm/

YAHA

Jit — Fri, 20 Jan 2017 05:38:05 -0600

YAHA, a fast and flexible hash-based aligner. YAHA is as fast and accurate as BWA-SW at finding the single best alignment per query and is dramatically faster and more sensitive than both SSAHA2 and MegaBLAST at finding all possible alignments. Unlike other aligners that report all, or one, alignment per query, or that use simple heuristics to select alignments, YAHA uses a directed acyclic graph to find the optimal set of alignments that cover a query using a biologically relevant breakpoint penalty. YAHA can also report multiple mappings per defined segment of the query. We show that YAHA detects more breakpoints in less time than BWA-SW across all SV classes, and especially excels at complex SVs comprising multiple breakpoints.

Availability: YAHA is currently supported on 64-bit Linux systems. Binaries and sample data are freely available for download from http://faculty.virginia.edu/irahall/YAHA.

Contact:

http://genome.wustl.edu/people/groups/detail/hall-lab/

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3463118/

Multi-metagenome assembly

Radha Agarkar — Fri, 03 Mar 2017 10:14:18 -0600

This project contains scripts and tutorials on how to assemble individual microbial genomes from metagenomes, as described in:

Genome sequences of rare, uncultured bacteria obtained by differential coverage binning of multiple metagenomes

Mads Albertsen, Philip Hugenholtz, Adam Skarshewski, Gene W. Tyson, Kåre L. Nielsen and Per .H. Nielsen

Nature Biotechnology 2013, doi: 10.1038/nbt.2579

Address of the bookmark: https://github.com/MadsAlbertsen/multi-metagenome

LoRDEC: a hybrid error correction program for long, PacBio reads

Jit — Mon, 10 Apr 2017 04:16:09 -0500

LoRDEC is a program to correct sequencing errors in long reads from 3rd generation sequencing with high error rate, and is especially intended for PacBio reads. It uses a hybrid strategy, meaning that it uses two sets of reads: the reference read set, whose error rate is assumed to be small, and the PacBio read set, which is then corrected using the reference set. Typically, the reference set contains Illumina reads.

Usually, errors in PacBio reads include many insertions and deletions, and comparatively less substitutions. LoRDEC can correct errors of all these types.
After correction, a larger portion of the sequence of PacBio reads is usable for detection of region of similarity with other sequences, for aligning them to the contigs of an assembly, etc.

Why is LoRDEC different?

It is efficient and can process large read data sets, included from eukaryotic or vertebrate species, on a usual computing server, and even works on desktop/laptop computers.
It adopts a novel graph based approach: it builds a succinct De Bruijn Graph (DBG) representing the short reads, and seeks a corrective sequence for each erroneous region of a long read by traversing chosen paths in the graph.

Address of the bookmark: http://www.atgc-montpellier.fr/lordec/

Jabba: Hybrid Error Correction for Long Sequencing Reads

Jit — Fri, 05 Jan 2018 03:58:14 -0600

Jabba is a hybrid error correction tool to correct third generation (PacBio / ONT) sequencing data, using second generation (Illumina) data.

Input

Jabba takes as input a concatenated de Bruijn graph and a set of sequences:

the de Bruijn graph should appear in fasta format with 1 entry per node, the meta information should be in the format:
>NODE
the set of sequences should be in fasta or fastq format. These sequences will be corrected (e.g. PacBio reads). The corrections will be written to a file Jabba fasta.
The output is a file in fasta format with corrections of the long reads, and additionally a file in the input format containing uncorrected reads.

https://github.com/biointec/jabba/wiki

https://almob.biomedcentral.com/articles/10.1186/s13015-016-0075-7

Address of the bookmark: https://github.com/biointec/jabba

NxRepair: error correction in de novo assemblies using Nextera Mate Pair Reads

BioStar — Thu, 24 Jan 2019 10:35:12 -0600

NxRepair is a python module that automatically detects large structural errors in de novo assemblies using Nextera mate pair reads. The decector will break a contig at the site of an identified misassembly and will generate a new fasta file containing both the corrected contigs and the correct, unaffected contigs.

https://nxrepair.readthedocs.io/en/latest/tutorial.html

nxrepair aligned_matepairs.bam assemblyfasta.fasta error_locations.csv new_fasta.fasta

Address of the bookmark: https://github.com/rebeccaroisin/nxrepair

Common steps for reads mapping !

BioStar — Thu, 09 Mar 2023 02:48:02 -0600

Mapping reads to a reference genome is an essential step in many types of genomic analysis, such as variant calling and gene expression analysis. Here are some general steps to follow for mapping reads to a genome:

Choose a read mapper: There are many read mappers available, such as BWA, Bowtie, and HISAT2. Choose a mapper that is appropriate for your type of data and research question.
Index the reference genome: Before mapping reads, the reference genome needs to be indexed. This involves creating an index of the genome sequence that allows the mapper to quickly find matches to the reads. Most mappers have their own indexing tools.
Prepare the read data: The reads should be in a format that is compatible with the mapper. Most mappers accept FASTQ or BAM files. Depending on the quality of the data, it may need to be filtered or trimmed before mapping.
Run the mapper: The mapper is run with the command-line interface or using a graphical user interface. The specific command depends on the mapper being used, but typically involves specifying the input data, reference genome, and output file format.
Evaluate the mapping results: After the mapping is complete, the results should be evaluated. This includes assessing the quality of the mapping, such as the mapping rate, the number of mapped reads, and the mapping quality score.
Post-processing: Depending on the analysis being performed, post-processing of the mapped reads may be necessary. This can include filtering reads based on quality, removing duplicate reads, and calling variants.

Overall, mapping reads to a reference genome is a complex process that requires careful consideration of the type of data, the research question, and the specific mapper being used.

SOAP2 : Short Oligonucleotide Analysis Package 2

Poonam Mahapatra — Wed, 23 May 2018 10:09:22 -0500

SOAPaligner/soap2 is a member of the SOAP (Short Oligonucleotide Analysis Package). It is an updated version of SOAP software for short oligonucleotide alignment. The new program features in super fast and accurate alignment for huge amounts of short reads generated by Illumina/Solexa Genome Analyzer. Compared to soap v1, it is one order of magnitude faster. It require only 2 minutes aligning one million single-end reads onto the human reference genome. Another remarkable improvement of SOAPaligner is that it now supports a wide range of the read length. SOAPaligner benefitted in time and space efficiency by a revolution in the basic data structures and algorithms used.The core algorithms and the indexing data structures (2way-BWT) are developed by the algorithms research group of the Department of Computer Science, the University of Hong Kong (T.W. Lam, Alan Tam, Simon Wong, Edward Wu and S.M. Yiu).

Address of the bookmark: http://soap.genomics.org.cn/soapaligner.html