BOL: Related items

NextDenovo: string graph-based de novo assembler for TGS long reads

Jit — Sun, 05 Jan 2020 04:08:29 -0600

NextDenovo is a string graph-based de novo assembler for TGS long reads. It uses a "correct-then-assemble" strategy similar to canu, but requires significantly less computing resources and storages. After assembly, the per-base error rate is about 97-98%, to further improve single base accuracy, please use NextPolish.

NextDenovo contains two core modules: NextCorrect and NextGraph. NextCorrect can be used to correct TGS long reads with approximately 15% sequencing errors, and NextGraph can be used to construct a string graph with corrected reads. It also contains a modified version of minimap2 for adapting input and output and producing more sensitive and accurate dovetail overlaps, and some useful utilities (see here for more details).

Address of the bookmark: https://github.com/Nextomics/NextDenovo

MashMap: a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s)

Jit — Tue, 12 Dec 2017 17:23:31 -0600

MashMap is a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s). It maps a query sequence against a reference region if and only if its estimated alignment identity is above a specified threshold. It does not compute the alignments explicitly, but rather estimates a k-mer based Jaccard similarity using a combination of Winnowing and MinHash. This is then converted to an estimate of sequence identity using the Mash distance. An appropriate k-mer sampling rate is automatically determined given minimum local alignment length and identity thresholds. The efficiency of the algorithm improves as both of these thresholds are increased.

Address of the bookmark: https://github.com/marbl/MashMap

Cerulean: A hybrid assembly using high throughput short and long reads

Rahul Nayak — Tue, 05 Jun 2018 10:10:15 -0500

Cerulean extends contigs assembled using short read datasets like Illumina paired-end reads using long reads like PacBio RS long reads. Cerulean v0.1 has been implemented with bacterial genomes in mind. The method is fully described in Deshpande, V., Fung, E. D., Pham, S., & Bafna, V. (2013). Cerulean: A hybrid assembly using high throughput short and long reads. arXiv preprint arXiv:1307.7933. http://arxiv.org/abs/1307.7933

Address of the bookmark: https://sourceforge.net/projects/ceruleanassembler/

wtdbg2: A fuzzy Bruijn graph approach to long noisy reads assembly

BioStar — Mon, 04 Feb 2019 04:53:47 -0600

Wtdbg2 is a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore Technologies (ONT). It assembles raw reads without error correction and then builds the consensus from intermediate assembly output.

./wtdbg2 -x rs -g 4.6m -t 16 -i reads.fa.gz -fo prefix
./wtpoa-cns -t 16 -i prefix.ctg.lay.gz -fo prefix.ctg.fa

Address of the bookmark: https://github.com/ruanjue/wtdbg2

Pacasus: Correction of palindromes in long reads from PacBio and Nanopore

BioStar — Mon, 12 Nov 2018 05:26:48 -0600

Tool for detecting and cleaning PacBio / Nanopore long reads after whole genome amplification. Check the poster from the Revolutionizing Next-Generation Sequencing (2nd edition) conference in the source folder: https://github.com/swarris/Pacasus/blob/master/vib2017.pdf.

The prepint version is found on http://www.biorxiv.org/content/early/2017/08/09/173872

It uses the pyPaSWAS framework for sequence alignment (https://github.com/swarris/pyPaSWAS)

Address of the bookmark: https://github.com/swarris/Pacasus

Software and Tools to detect structure variation with long reads !!

Archana Malhotra — Wed, 15 Mar 2017 14:31:09 -0500

Uncovering the connection between genetics and heritable diseases requires an approach that looks at all the variant bases and types in a genome. While a PacBio de novo assembly resolves the most novel SV variants. 8-10X PacBio coverage of single genomes or trios reveals triple the SVs detectable by short-read data.

With Single Molecule, Real-Time (SMRT) Sequencing, you can access structural variations having a broad range of sizes, types, and GC content with the ability to:

Uncover missing heritability linked to structural variation
Unambiguously identify genomic context and variant breakpoints at the sequence level to unravel the genetic etiology of disease
Resolve structural variation across the complete size spectrum with basepair resolution

Following are the SV tools, which can assist you to achieve your goal.

Sniffles: Structural variation caller using third generation sequencing

Sniffles is a structural variation caller using third generation sequencing (PacBio or Oxford Nanopore). It detects all types of SVs using evidence from split-read alignments, high-mismatch regions, and coverage analysis. Please note the current version of Sniffles requires sorted output from BWA-MEM (use -M and -x parameter) or NGM-LR with the optional SAM attributes enabled!

More at https://github.com/fritzsedlazeck/Sniffles

MultiBreak-SV: It identifies structural variants from next-generation paired end data, third-generation long read data, or data from a combination of sequencing platforms.

There are two pieces of software in this release: (1) a pre-processor that takes machineformat (.m5) BLASR files, and (2) MultiBreak-SV. For installation and usage instructions, see doc/MultiBreakSV-Manual.txt.

More at https://github.com/raphael-group/multibreak-sv

Parliament: A Structural Variation Tool. Why ask a single sv-detection approach to find every variant when you can have a parliament of tools deciding?

Publication about the algorithm and “…the first long-read characterization of structural variation in a diploid human personal genome…” (HS1011) - “Assessing structural variation in a personal genome—towards a human reference diploid genome”

More at https://sourceforge.net/projects/parliamentsv/

https://www.dnanexus.com/papers/Parliament_Info_Sheet.pdf

PBHoney: the structural variation discovery tool

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Read The Paper http://www.biomedcentral.com/1471-2105/15/180/abstract

More at https://sourceforge.net/projects/pb-jelly/

SMRT-SV: Structural variant and indel caller for PacBio reads

Structural variant (SV) and indel caller for PacBio reads based on methods from Chaisson et al. 2014.

SMRT-SV provides an official software package for tools described in Chaisson et al. 2014 and adds several key features including the following.

Unified variant calling user interface with built-in cluster compute support
Small indel calling (2-49 bp)
Improved inversion calling (screenInversions)
Quality metric for SV calls based on number of local assemblies supporting each call
Higher sensitivity for SV calls using tiled local assemblies across the entire genome instead of "signature" regions
Genotyping of SVs with Illumina paired-end reads from WGS samples

More at https://github.com/EichlerLab/pacbio_variant_caller

LoRDEC: a hybrid error correction program for long, PacBio reads

Jit — Mon, 10 Apr 2017 04:16:09 -0500

LoRDEC is a program to correct sequencing errors in long reads from 3rd generation sequencing with high error rate, and is especially intended for PacBio reads. It uses a hybrid strategy, meaning that it uses two sets of reads: the reference read set, whose error rate is assumed to be small, and the PacBio read set, which is then corrected using the reference set. Typically, the reference set contains Illumina reads.

Usually, errors in PacBio reads include many insertions and deletions, and comparatively less substitutions. LoRDEC can correct errors of all these types.
After correction, a larger portion of the sequence of PacBio reads is usable for detection of region of similarity with other sequences, for aligning them to the contigs of an assembly, etc.

Why is LoRDEC different?

It is efficient and can process large read data sets, included from eukaryotic or vertebrate species, on a usual computing server, and even works on desktop/laptop computers.
It adopts a novel graph based approach: it builds a succinct De Bruijn Graph (DBG) representing the short reads, and seeks a corrective sequence for each erroneous region of a long read by traversing chosen paths in the graph.

Address of the bookmark: http://www.atgc-montpellier.fr/lordec/

Deepbinner: a signal-level demultiplexer for Oxford Nanopore reads

Jit — Mon, 10 Feb 2020 02:45:53 -0600

Deepbinner is a tool for demultiplexing barcoded Oxford Nanopore sequencing reads. It does this with a deep convolutional neural network classifier, using many of the architectural advances that have proven successful in image classification. Unlike other demultiplexers (e.g. Albacore and Porechop), Deepbinner identifies barcodes from the raw signal (a.k.a. squiggle) which gives it greater sensitivity and fewer unclassified reads.

Address of the bookmark: https://github.com/rrwick/Deepbinner

medaka: Sequence correction provided by ONT Research

BioStar — Mon, 18 May 2020 16:28:00 -0500

medaka is a tool to create a consensus sequence from nanopore sequencing data. This task is performed using neural networks applied from a pileup of individual sequencing reads against a draft assembly. It outperforms graph-based methods operating on basecalled data, and can be competitive with state-of-the-art signal-based methods, whilst being much faster.

Address of the bookmark: https://github.com/nanoporetech/medaka

PANDASEQ is a program to align Illumina reads, optionally with PCR primers embedded in the sequence, and reconstruct an overlapping sequence.

BioStar — Fri, 21 Sep 2018 10:19:52 -0500

Development packages for zlib and libbz2 are needed, as well as a standard compiler environment. On Ubuntu, this can be installed via:

sudo apt-get install build-essential libtool automake zlib1g-dev libbz2-dev pkg-config

On MacOS, the Apple Developer tools and Fink (or MacPorts or Brew) must be installed, then:

sudo fink install bzip2-dev pkgconfig

Address of the bookmark: https://github.com/neufeld/pandaseq