BOL: Related items

Oxford Nanopore Sequencing, Hybrid Error Correction, and de novo Assembly of a Eukaryotic Genome

Jit — Wed, 29 Nov 2017 05:08:53 -0600

Monitoring the progress of DNA molecules through a membrane pore has been postulated as a method for sequencing DNA for several decades. Recently, a nanopore-based sequencing instrument, the Oxford Nanopore MinION, has become available that we used for sequencing the S. cerevisiae genome. To make use of these data, we developed a novel open-source hybrid error correction algorithm Nanocorr (https://github.com/jgurtowski/nanocorr) specifically for Oxford Nanopore reads, as existing packages were incapable of assembling the long read lengths (5-50kbp) at such high error rate (between ~5 and 40% error). With this new method we were able to perform a hybrid error correction of the nanopore reads using complementary MiSeq data and produce a de novo assembly that is highly contiguous and accurate: the contig N50 length is more than ten-times greater than an Illumina-only assembly (678kb versus 59.9kbp), and has greater than 99.88% consensus identity when compared to the reference. Furthermore, the assembly with the long nanopore reads presents a much more complete representation of the features of the genome and correctly assembles gene cassettes, rRNAs, transposable elements, and other genomic features that were almost entirely absent in the Illumina-only assembly.

Address of the bookmark: http://schatzlab.cshl.edu/data/nanocorr/

Hercules: a profile HMM-based hybrid error correction algorithm for long reads

Jit — Mon, 20 Aug 2018 14:14:11 -0500

Choosing whether to use second or third generation sequencing platforms can lead to trade-offs between accuracy and read length. Several studies require long and accurate reads including de novo assembly, fusion and structural variation detection. In such cases researchers often combine both technologies and the more erroneous long reads are corrected using the short reads. Current approaches rely on various graph based alignment techniques and do not take the error profile of the underlying technology into account. Memory- and time- efficient machine learning algorithms that address these shortcomings have the potential to achieve better and more accurate integration of these two technologies. Results: We designed and developed Hercules, the first machine learning-based long read error correction algorithm. The algorithm models every long read as a profile Hidden Markov Model with respect to the underlying platformtextquoterights error profile. The algorithm learns a posterior transition/emission probability distribution for each long read and uses this to correct errors in these reads. Using datasets from two DNA-seq BAC clones (CH17-157L1 and CH17-227A2), and human brain cerebellum polyA RNA-seq, we show that Hercules-corrected reads have the highest mapping rate among all competing algorithms and highest accuracy when most of the basepairs of a long read are covered with short reads. Availability:

Hercules source code is available at https://github.com/BilkentCompGen/Hercules

Address of the bookmark: https://github.com/BilkentCompGen/Hercules

Deepbinner: a signal-level demultiplexer for Oxford Nanopore reads

Neel — Tue, 27 Nov 2018 03:38:49 -0600

Deepbinner is a tool for demultiplexing barcoded Oxford Nanopore sequencing reads. It does this with a deep convolutional neural network classifier, using many of the architectural advances that have proven successful in image classification. Unlike other demultiplexers (e.g. Albacore and Porechop), Deepbinner identifies barcodes from the raw signal (a.k.a. squiggle) which gives it greater sensitivity and fewer unclassified reads.

Reasons to use Deepbinner:
- To minimise the number of unclassified reads (use Deepbinner by itself).
- To minimise the number of misclassified reads (use Deepbinner in conjunction with Albacore demultiplexing).
- You plan on running signal-level downstream analyses, like Nanopolish. Deepbinner can demultiplex the fast5 fileswhich makes this easier.
Reasons to not use Deepbinner:
- You only have basecalled reads not the raw fast5 files (which Deepbinner requires).
- You have a small/slow computer. Deepbinner is more computationally intensive than Porechop.
- You used a sequencing/barcoding kit other than the ones Deepbinner was trained on.

Address of the bookmark: https://github.com/rrwick/Deepbinner

Run miniasm assembler on nanopore reads !

Jit — Mon, 18 Dec 2017 04:07:50 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

Find the detail of the reads repeats:

fq2fa ONT_A.fastq ONT_A.fasta

minimap2 -xava-ont ONT_A.fasta ONT_A.fasta -t10 -X > AONT.paf

awk '{if($1==$6){print}}' AONT.paf > AONTself.paf

awk '$5=="-"' AONTself.paf | awk '{print $1}'| sort|uniq > invertedrepeat.list

Generated a few palindrome and repeats plots (highlighting only repeats largest than 10, 20 and 30 kb)

minidot -f 5 -m 30000 AONTself.paf > AONTself30000.eps
sed 's/_template_pass_FAH31515//' AONTself30000.eps > AONTself30000final.eps

minidot -f 5 -m 20000 AONTself.paf > AONTself20000.eps
sed 's/_template_pass_FAH31515//' AONTself20000.eps > AONTself20000final.eps

minidot -f 5 -m 10000 AONTself.paf > AONTself10000.eps
sed 's/_template_pass_FAH31515//' AONTself10000.eps > AONTself10000final.eps

Assemble with miniasm:

miniasm -f ONT_A.fasta AONT.paf > AONT.gfa
grep '^S' AONT.gfa |awk '{print ">"$2"\n"$3}' > AONT_miniasm.fasta

minimap2 -xasm10 AONT_miniasm.fasta AONT_miniasm.fasta -t1 -X > AONT_miniasm.paf

awk '{if($1==$6){print}}' AONT_miniasm.paf > AONT_miniasm_self.paf

minidot -f 5 -m 10000 AONT_miniasm_self.paf > AONT_miniasm_self10000.eps

Njoy the assembly !

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

BioJoker — Tue, 02 Apr 2019 21:54:55 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye

RNA-Bloom: a fast and memory-efficient de novo transcript sequence assembler

LEGE — Thu, 09 Jul 2020 03:13:06 -0500

RNA-Bloom is a fast and memory-efficient de novo transcript sequence assembler. It is designed for the following sequencing data types:

single-end/paired-end bulk RNA-seq (strand-specific/agnostic)
paired-end single-cell RNA-seq (strand-specific/agnostic)
nanopore RNA-seq (PCR cDNA/direct cDNA/direct RNA)

Written by Ka Ming Nip ✉️

Address of the bookmark: https://github.com/bcgsc/RNA-Bloom

FinisherSC:a repeat-aware tool for upgrading de novo assembly using long reads

Jit — Mon, 20 Aug 2018 04:08:50 -0500

Here is the command to run the tool:

python finisherSC.py destinedFolder mummerPath

If you are running on server computer and would like to use multiple threads, then the following commands can generate 20 threads to run FinisherSC.

python finisherSC.py -par 20 destinedFolder mummerPath

Sometimes, if the names of raw reads and contigs consists of special characters/formats, FinisherSC/MUMmer may not parse them correctly. In that case, you want to have a quick renaming of the names of contigs/reads in contigs.fasta or raw_reads.fasta using the following command.

    perl -pe 's/>[^\$]*$/">Seg" . ++$n ."\n"/ge' raw_reads.fasta > newRaw_reads.fasta
    cp newRaw_reads.fasta raw_reads.fasta
    perl -pe 's/>[^\$]*$/">Seg" . ++$n ."\n"/ge' contigs.fasta > newContigs.fasta
    cp newContigs.fasta contigs.fasta

Address of the bookmark: https://github.com/kakitone/finishingTool

AlignGraph2: similar genome-assisted reassembly pipeline for PacBio long reads

Rahul Nayak — Sun, 14 Mar 2021 09:42:47 -0500

AlignGraph2 is the second version of AlignGraph for PacBio long reads. It extends and refines contigs assembled from the long reads with a published genome similar to the sequencing genome.

More at https://academic.oup.com/bib/advance-article-abstract/doi/10.1093/bib/bbab022/6146772

Address of the bookmark: https://github.com/huangs001/AlignGraph2

LRCstats: Long Read Correction Statistics

Jit — Fri, 05 Jan 2018 04:04:20 -0600

LRCstats is an open-source pipeline for benchmarking DNA long read correction algorithms for long reads outputted by third generation sequencing technology such as machines produced by Pacific Biosciences. The reads produced by third generation sequencing technology, as the name suggests, are longer in length than reads produced by next generation sequencing technologies, such as those produced by Illumina. However, long reads are plagued by high error rates, which can cause issues in downstream analysis. Long read correction algorithms reduce the error rate of long reads either through self-correcting methods or using accurate, short reads outputted by next generation sequencing technologies to correct long reads.

Of course, some long read correction algorithms are better than others, and developers of long read correction algorithms will wish to compare their algorithm with others currently available. LRCstats benchmarks long read correction algorithms using long reads produced by simulators (such as SimLoRD or PBSim) where the two-way alignments between the uncorrected long reads (uLR) and the corresponding sequences in the reference genome (Ref) are given in some sort of alignment file and then aligning the corrected long reads (cLR) to the Ref-uLR two-way alignments to create three-way alignments using a dynamic programming algorithm. Statistics on these three-way alignments are then collected, such as the overall error rates of the corrected long reads.

https://www.healthcare.uiowa.edu/labs/au/LSC/

Address of the bookmark: https://github.com/cchauve/lrcstats

Bioinformatics tools developed for Oxford Nanopore data analysis !

biogeek — Wed, 27 Dec 2017 20:47:30 -0600

MinION is the only portable real-time device for DNA and RNA sequencing. Each consumable flow cell can now generate 10–20 Gb of DNA sequence data. Ultra-long read lengths are possible (hundreds of kb) as you can choose your fragment length. One of the technical advantages of ONT data is the read length, which offers great prospects for genome assembly. Generally, assemblers are based on several different types of algorithms, such as greedy, overlap-layout-consensus (OLC), de Bruijn graph (DBG), and string graph.

List of analysis tools developed for Oxford Nanopore data

BWA
Fast nanopore data tuned alignment tool
https://github.com/lh3/bwa

GraphMap
Mapper for long and error-prone reads
https://github.com/isovic/graphmap

LAST
Nanopore tuned alignment tool
http://last.cbrc.jp/

LINKS
Software tool for long read scaffolding
https://github.com/warrenlr/LINKS/

marginAlign
Tools to align nanopore reads to a reference
https://github.com/benedictpaten/marginAlign

minoTour
Real time analysis tools
http://minotour.nottingham.ac.uk/

nanoCORR
Error-correction tool for nanopore sequence data
https://github.com/jgurtowski/nanocorr

NanoOK
Software for nanopore data, quality and error profiles
https://documentation.tgac.ac.uk/display/NANOOK/NanoOK

Nanopolish
Nanopore analysis and genome assembly software
https://github.com/jts/nanopolish

nanopore
Variant-detection tool for nanopore sequence data
https://github.com/mitenjain/nanopore

Nanocorrect
Error-correction tool for nanopore sequence data
https://github.com/jts/nanocorrect/

npReader
Real-time conversion and analysis of nanopore reads
https://github.com/mdcao/npReader

poRe
Tool for analyzing and visualizing nanopore data
https://sourceforge.net/p/rpore/wiki/Home/

PoreSeq
Error-correction and variant-calling software
https://github.com/tszalay/poreseq

Poretools
Nanopore sequence analysis and visualization software
https://github.com/arq5x/poretools

SSPACE-LongRead
Genome scaffolding tool
http://www.baseclear.com/genomics/bioinformatics/basetools/SSPACE-longread

SMIS
Genome scaffolding tool
https://sourceforge.net/projects/phusion2/files/smis/

List of assemblers for Oxford Nanopore MinION long reads

LQS
DALIGNER, Celera OLC Nanocorrect,
Nanopolish corrector
https://github.com/jts/nanopolish

PBcR
HGAP or BLASR, Celera OLC
PBcR corrector
http://wgs-assembler.sourceforge.net/wiki/index.php/PBcR
–
Canu
MHAP, Celera OLC
Canu corrector
https://github.com/marbl/canu

Falcon
String graph, Celera OLC
Falcon corrector
https://github.com/PacificBiosciences/falcon

Miniasm
OLC
https://github.com/lh3/miniasm

ra-integrate
OLC
https://github.com/mariokostelac/ra-integrate/

ALLPATHS-LG
de Bruijn graph
ALLPATHS-L corrector
https://www.broadinstitute.org/software/allpaths-lg/blog/?page_id=12

SPAdes
de Bruijn graph
SPAdes corrector
http://bioinf.spbau.ru/spades