BOL: Related items

Tadpole: an assembler, error-corrector, and read-extender

BioStar — Tue, 04 Feb 2020 23:35:40 -0600

Tadpole is a kmer-based assembler, with additional capabilities of error-correcting and extending reads. It does not do any complicated graph analysis or scaffolding, and therefore, is not particularly good for diploid organisms. Tadpole is very conservative and optimized for correctness rather than length; which is to say, it stops at every branch, and condenses every repeat. Also, it does not currently do scaffolding.

To error-correct reads:
tadpole.sh in=reads.fq out=corrected.fq mode=correct

To extend reads by 50bp in each direction:
tadpole.sh in=reads.fq out=extended.fq mode=extend el=50 er=50

To error-correct and extend at the same time, using a kmer length of 62:
tadpole.sh in=reads.fq out=extended.fq mode=extend el=50 er=50 k=62 ecc=t

More at http://seqanswers.com/forums/showthread.php?t=61445

Address of the bookmark: https://jgi.doe.gov/data-and-tools/bbtools/bb-tools-user-guide/tadpole-guide/

AlignGraph: algorithm for secondary de novo genome assembly guided by closely related references

Manisha Mishra — Tue, 17 Apr 2018 16:21:20 -0500

AlignGraph is a software that extends and joins contigs or scaffolds by reassembling them with help provided by a reference genome of a closely related organism.

Using AlignGraph

AlignGraph --read1 reads_1.fa --read2 reads_2.fa --contig contigs.fa --genome genome.fa --distanceLow distanceLow --distanceHigh distancehigh --extendedContig extendedContigs.fa --remainingContig remainingContigs.fa [--kMer k --insertVariation insertVariation --coverage coverage --part p --fastMap --ratioCheck --iterativeMap --misassemblyRemoval --resume]

Address of the bookmark: https://github.com/baoe/AlignGraph

ASplice: a scalable and memory-efficient algorithm for de novo transcriptome assembly

Rahul Nayak — Tue, 03 Jul 2018 04:09:46 -0500

With increased availability of de novo assembly algorithms, it is feasible to study entire transcriptomes of non-model organisms. While algorithms are available that are specifically designed for performing transcriptome assembly from high-throughput sequencing data, they are very memory-intensive, limiting their applications to small data sets with few libraries. Texas A&M University researchers develop a transcriptome assembly algorithm that recovers alternatively spliced isoforms and expression levels while utilizing as many RNA-Seq libraries as possible that contain hundreds of gigabases of data. New techniques are developed so that computations can be performed on a computing cluster with moderate amount of physical memory. Availability – A software program that implements the algorithm is available at: http://faculty.cse.tamu.edu/shsze/asplice. Sze SH, Pimsler ML, Tomberlin JK, Jones CD, Tarone AM. (2017) A scalable and memory-efficient algorithm for de novo transcriptome assembly of non-model organisms. BMC Genomics 18(Suppl 4):387.

Address of the bookmark: http://faculty.cse.tamu.edu/shsze/asplice/

MITOS: improved de novo metazoan mitochondrial genome annotation

Jit — Fri, 26 Oct 2018 08:25:39 -0500

Allows automatic annotation of metazoan mitochondrial genomes. MITOS is a pipeline designed to compute a consistent de novo annotation of the mitogenomic sequences. The software allows for a systematic error screening, the standardisation of gene name and gene boundary designation, anticodon labelling of tRNAs, and provides the means for the assessment of the validity of a gene assignment.

Address of the bookmark: http://mitos.bioinf.uni-leipzig.de/index.py

Supernova: generates phased, whole-genome de novo assemblies from a Chromium-prepared library.

Jit — Sun, 31 May 2020 01:59:30 -0500

Supernova generates phased, whole-genome de novo assemblies from a Chromium-prepared library.

Please see Achieving Success with De Novo Assembly and System Requirements before creating your Chromium libraries for assembly.

Supernova should be run using 38-56x coverage of the genome.
• Somewhat higher coverage is sometimes advantageous.
• Supernova will exit if it finds that coverage is far from the recommended range.
• Note that at most 2.14 billion reads are allowed.
• Please note that we have not extensively tested genomes larger than human, and any genome above approximately 4 GB should be considered experimental and is not supported.

Address of the bookmark: https://support.10xgenomics.com/de-novo-assembly/software/pipelines/latest/using/running

SALSA: A tool to scaffold long read assemblies with Hi-C

Jit — Fri, 15 Jun 2018 04:01:15 -0500

This code is used to scaffold your assemblies using Hi-C data. This version implements some improvements in the original SALSA algorithm. If you want to use the old version, it can be found in the old_salsa branch. To use the latest version, first run the following commands: cd SALSA make To run the code, you will need Python 2.7, BOOST libraries and Networkx(version lower than 1.2). If you consider using this tool, please cite our publication which describes the methods used for scaffolding. Ghurye, J., Pop, M., Koren, S., Bickhart, D., & Chin, C. S. (2017). Scaffolding of long read assemblies using long range contact information. BMC genomics, 18(1), 527. Link Ghurye, J., Rhie, A., Walenz, B.P., Schmitt, A., Selvaraj, S., Pop, M., Phillippy, A.M. and Koren, S., 2018. Integrating Hi-C links with assembly graphs for chromosome-scale assembly. bioRxiv, p.261149 Link For any queries, please either ask on github issue page or send an email to Jay Ghurye (jayg@cs.umd.edu).

Address of the bookmark: https://github.com/machinegun/SALSA

1mb long DNA with Nanopore technology

Jit — Tue, 19 Dec 2017 18:49:28 -0600

The first continuous DNA read of more than a million bases (>1Mb) has been achieved, using Oxford Nanopore sequencing technology. Congratulations to Martin Smith and collaborators! Read more: http://bit.ly/2j5TNCO

Yau Group

Tue, 15 Oct 2013 13:05:15 -0500

Yau Group are a new research group based at the Wellcome Trust Centre for Human Genetics and the Department of Statistics at the University of Oxford.

Yau Group develops statistical and computational methods for the analysis of genomic datasets with a particular interest in cancer sequencing applications and the use of Bayesian Statistics.

Yau Group are currently have projects in somatic mutation analysis of heterogeneous cancers, data fusion or integration techniques and single cell genomics.

More @ http://www.well.ox.ac.uk/~cyau/index.html

orthodotter: Synteny plots (oxford grid)

Jit — Wed, 09 Aug 2017 07:16:16 -0500

orthodotter -h
--------------------------------------------------------------------------------
orthodotter - Plot orthologous genes on an oxford grid.
       -f      : input file, containing orthologous genes, default is stdin
                       species chr-name start end species chr-name start end
       -toPlot  : give the x and y sets and the color separated by double-dots,
                       for example set1:set2:red will plot set1 on x, set2 on y with
                       red points. Could give several -toPlot arguments.
                       To launch the clustering of dots, use extra-option 1=dist,min_nb_genes
                       where dist is the minimal distance (euclidian) between two points and min_nb_genes the minimal
                       number of genes in a cluster to be valid.
       -o      : output file, default is stdout
       -x       : resolution of x axis, default is 600
       -y       : resolution on y axis, default is 600
       -r       : radius of circle representing orthologous genes
       -format       : could be png, gif, jpg, pdf or ps. Default is png.
       -fg           : foreground color, default is black
       -bg           : background color, default is transparent
       -fSize   : fontSize, default is 1
       -filter       : check chromosome names
       -h            : help
--------------------------------------------------------------------------------
orthodotter -f Vigne_Banane.ortho -toPlot Vigne:Banane:black:1=10,5 -x 1200 -y 1200 -bg white -o Vigne_vs_Banane.png > Vigne_vs_Banane.clusters
--------------------------------------------------------------------------------

Address of the bookmark: https://github.com/institut-de-genomique/orthodotter

Understating pacbio reads name !

BioJoker — Fri, 23 Nov 2018 07:36:46 -0600

m140415_143853_42175_c100635972550000001823121909121417_s1_p0/553/3100_11230 0.99 24
└1┘└─────2─────┘└──3─┘└────────────────4────────────────┘└5┘└6┘└7┘└────8────┘└─9─┘└10┘

"m" = movie
Time of Run Start (yymmdd_hhmmss)
Instrument Serial Number
SMRT Cell Barcode
Set Number (a.k.a. "Look Number". Deprecated field, used in earlier version of RS)
Part Number (usually "p0", "X0" when using expired reagents)
ZMW hole number
Subread Region (start_stop using polymerase read coordinates)
readScore
barcodeScore