BOL: Related items

UniAligner: a parameter-free framework for fast sequence alignment

Abhi — Fri, 08 Mar 2024 23:36:12 -0600

UniAligner (formerly, TandemAligner) is the first parameter-free algorithm for sequence alignment that introduces a sequence-dependent alignment scoring that automatically changes for any pair of compared sequences. Classical alignment approaches, such as the Smith-Waterman algorithm, that work well for most sequences, fail to construct biologically adequate alignments of extra-long tandem repeats (ETRs), such as human centromeres and immunoglobulin loci. This limitation was overlooked in the previous studies since the sequences of the centromeres and other ETRs across multiple genomes only became available recently.

More at https://www.nature.com/articles/s41592-023-01970-4

Address of the bookmark: https://github.com/seryrzu/unialigner

Bioinformatics approach to Boar Taint

Rahul Agarwal — Wed, 17 Jul 2013 15:50:37 -0500

Meat products obtained from intact male pigs often produce offensive smell or odour which is recognized as a complex genetic trait called boar taint.Androstenone and Skatole in the fat primarily cause boar taint. Metabolism of androstenone and sex steroids share a common pathway which makes removal of boar taint a very challenging task. Castration is a traditional solution to remove boar taint but it also results in bad quality of meat due to low level of steroids which is objectionable to many consumers. Detected functional variant(s) underlying boar taint compounds can be used as genetic markers in selection of male pigs with reduced boar taint levels. Resequencing of a total of 47 samples belong to Norwegian Landrace (NL) and Duroc (D) pigs with varied boar taint levels were done in Illumina HiSeq2000 to >10X average coverage. Short reads generated from these samples mapped to Sus Scrofa version 10.2 reference assembly using Bowtie2. Alignment file then used for calling SNPs and InDels inside previousy identified QTL regions on SSC5,13, and 7 with the aid of FreeBayes , a variant caller tool. A final list of SNPs was prepared after filtering SNPs on the basis of SNP quality, coverage of SNP allele, functional and structural annotation, and repeats, etc. Selected SNPs will be genotyped in sample population for validation and then used for constructing SNPs haplotypes in close linkage disequilibrium with QTLs and fine mapping of QTLs through association mapping of genotyped SNPs.

Latest paper on comparison of mapping tools

Rahul Agarwal — Tue, 03 Sep 2013 18:00:38 -0500

A. Hatem, D. Bozdag, A. E. Toland, U. V. Catalyurek "Benchmarking short sequence mapping tools" BMC Bioinformatics, 14(1):184, 2013.

http://bmi.osu.edu/hpc/software/benchmark/

http://bmi.osu.edu/hpc/software/pmap/pmap.html

Other similiar papers:

http://online.liebertpub.com/doi/pdf/10.1089/cmb.2012.0022

http://bioinformatics.oxfordjournals.org/content/28/24/3169

Some new Mapping tool links:

GSNAP

http://research-pub.gene.com/gmap/

RMAP

http://rulai.cshl.edu/rmap/

mrsFAST

http://mrsfast.sourceforge.net/Home

http://sourceforge.net/projects/mrsfast/files/mrsfast-ultra-3.1.0/

BFAST

http://sourceforge.net/apps/mediawiki/bfast/index.php?title=Main_Page

SHRiMP (for AB SOLiD color-space reads)

http://compbio.cs.toronto.edu/shrimp/

RazerA 3

http://www.seqan.de/projects/razers/

Address of the bookmark: http://www.biomedcentral.com/1471-2105/14/184

kSNP3.0: SNP detection and phylogenetic analysis of genomes without genome alignment or reference genome

Jit — Fri, 08 Dec 2017 16:48:40 -0600

Sept. 20, 2017 Version 3.1 released. Major upgrade. Version 3.1 fixes the problems with SNP annotation that arose when NCBI discontinued use of GI numbers. Please read carefully the Preface (page 3) and the File of annotated genomes section (pages 9-10) in the version 3.1 User Guide. Thanks to Tom Slezak for revsing the get_genbank_file3 script and to Tod Stuber (USDA) for testing version 3.1 even though he doesn't need the annotation feature. All users are encouraged to upgrade to version 3.1.

Address of the bookmark: https://sourceforge.net/projects/ksnp/files/

Snakemake workflow: dna-seq-gatk-variant-calling

Jit — Thu, 25 Jul 2019 12:55:07 -0500

This Snakemake pipeline implements the GATK best-practices workflow for calling small genomic variants.

Address of the bookmark: https://github.com/snakemake-workflows/dna-seq-gatk-variant-calling

Best Practices for Variant Calling with the GATK

biogeek — Sat, 22 Feb 2020 03:07:31 -0600

The presentations below were filmed during the March 2015 GATK Workshop, part of the BroadE Workshop series. At the time of this workshop, the current version of Broad’s Genome Analysis Toolkit (GATK) was version 3.3.

Genome Analysis Toolkit

03/19/15	Introduction to High-Throughput Sequencing data formats and methods	Joel Thibault	PDF	Video
03/19/15	Introduction to the GATK	Geraldine Van der Auwera	PDF	Video
03/19/15	Mapping, processing, and duplicate marking with Picard tools	Matt Sooknah	PDF	Video
03/19/15	Mapping and processing RNAseq	Ami Levy-Moonshine	PDF	Video
03/19/15	Indel realignment	Mark Fleharty	PDF	Video
03/19/15	Base quality score recalibration	David Roazen	PDF	Video
03/19/15	Introduction to variant discovery: calling cohorts	Louis Bergelson	PDF	Video
03/19/15	Variant calling and joint genotyping	Sheila Chandran	PDF	Video
03/19/15	Variant quality score recalibration	Bertrand Haas	PDF	Video
03/19/15	Introduction to working with variants	Yossi Farjoun	PDF	Video
03/19/15	Genotype refinement	Laura Gauthier	PDF	Video
03/19/15	Annotation and variant evaluation	David Benjamin	PDF	Video

Address of the bookmark: https://www.broadinstitute.org/partnerships/education/broade/best-practices-variant-calling-gatk-1

AIRVF: a filtering toolbox for precise variant calling in Ion Torrent sequencing

BioStar — Fri, 22 Dec 2017 00:31:06 -0600

AIRVF that works on flowgram, raw and mapped reads and called variants to reduce artifact-driven false variant calls. Tests on sequencing data of standard reference material showed up to ∼98% reduction of false variants when combined to conventional public pipelines and ∼48% to the in-house commercial solution, with a minimal loss of sensitivity

The program with a detailed manual is available at https://sourceforge.net/projects/airvf/

Address of the bookmark: https://sourceforge.net/projects/airvf/

The new corona variant has 23 mutations in all, which is unusually huge !

Shruti Paniwala — Wed, 23 Dec 2020 03:50:50 -0600

The new SARS-CoV-2 version, B.1.1.7, which was first seen in the third week of September in Kent and Greater London, has since spread to other locations in the UK. According to the COVID-19 Genomics UK Consortium (COG-UK Consortium) that analysed the genome data of the virus and identified the variant, the new variant has been spreading "rapidly" over the last four weeks and has now been detected in other locations in the UK, suggesting further spread of the variant in the region.

According to a preliminary report posted on December 19 by the COG-UK Consortium scientists, as of December 15, 1,623 variant genomes have been sequenced. In a December 21 tweet, COG-UK Consortium said that it added 2,963 more genome sequences of SARS-CoV-2, of which 942 (32%) belong to the new variant. The Consortium intends to sequence 20,000 more SARS-CoV-2 genomes in the next two weeks to further ascertain the spread of the variant.

There is no clear proof, at least not yet, that it does cause severe pandemic. But there is a justification for seriously taking the possibility. Another coronavirus lineage in South Africa has acquired one specific mutation that is also present in B.1.1.7. This variant is increasingly spreading across South Africa's coastal regions. And doctors have observed in preliminary research that individuals infected with this variant bear a higher viral load-a higher concentration of the virus in their upper respiratory tract. In many viral diseases, this is associated with more severe symptoms.

Epiviz: an interactive visualization tool for functional genomics data.

Jit — Mon, 09 Jul 2018 05:27:39 -0500

Epiviz is an interactive visualization tool for functional genomics data. It supports genome navigation like other genome browsers, but allows multiple visualizations of data within genomic regions using scatterplots, heatmaps and other user-supplied visualizations. It also includes data from the Gene Expression Barcode project for transcriptome visualization. It has a flexible plugin framework so users can addd3 visualizations. You can see a video tour here.

https://bioconductor.org/packages/release/bioc/html/epivizr.html

https://github.com/epiviz

https://github.com/epiviz/epiviz

Address of the bookmark: https://epiviz.github.io/

EXCAVATOR: detecting copy number variants from whole-exome sequencing data

Radha Agarkar — Fri, 04 Jan 2019 10:10:48 -0600

EXCAVATOR, for the detection of copy number variants (CNVs) from whole-exome sequencing data. EXCAVATOR combines a three-step normalization procedure with a novel heterogeneous hidden Markov model algorithm and a calling method that classifies genomic regions into five copy number states. We validate EXCAVATOR on three datasets and compare the results with three other methods. These analyses show that EXCAVATOR outperforms the other methods and is therefore a valuable tool for the investigation of CNVs in largescale projects, as well as in clinical research and diagnostics. EXCAVATOR is freely available at http://sourceforge.net/projects/excavatortool/.

EXCAVATOR is a novel software package for the detection of copy number variants (CNVs) from whole-exome sequencing data.
EXCAVATOR has been published on Genome Biology (http://genomebiology.com/2013/14/10/R120/abstract).

Address of the bookmark: https://sourceforge.net/projects/excavatortool/