BOL: Related items

PRISM

Jit — Sat, 10 Dec 2016 15:19:40 -0600

PRISM is a software for split read (reads which span across a structrual variant -- SV ) mapping and SV calling from the mapping result. PRISM is able to detect small insertions and abitrary size deletions, inversions and tandom duplications with the direction of discordant read pairs. PRISM_CTX is a tool for detecting inter-chromosome trans-location events.

PRISM and PRISM_CTX were originally designed and written by Michael Brudno and Yue Jiang, The original PRISM publication can be found here.

The authors may be contacted via e-mail at: prism at cs.toronto.edu.

Additional information is available in the PRISM README file and PRISM_CTX README file.

http://compbio.cs.toronto.edu/prism/

Address of the bookmark: http://compbio.cs.toronto.edu/prism/

HTSlib

Jit — Wed, 15 Mar 2017 11:38:05 -0500

Samtools is a suite of programs for interacting with high-throughput sequencing data. It consists of three separate repositories:

Samtools: Reading/writing/editing/indexing/viewing SAM/BAM/CRAM format
BCFtools: Reading/writing BCF2/VCF/gVCF files and calling/filtering/summarising SNP and short indel sequence variants
HTSlib: A C library for reading/writing high-throughput sequencing data

Samtools and BCFtools both use HTSlib internally, but these source packages contain their own copies of htslib so they can be built independently.

Address of the bookmark: http://www.htslib.org/

Fastq format

Jit — Wed, 03 May 2017 04:23:32 -0500

FASTQ format is a text-based format for storing both a biological sequence (usually nucleotide sequence) and its corresponding quality scores. Both the sequence letter and quality score are each encoded with a single ASCII character for brevity.

It was originally developed at the Wellcome Trust Sanger Institute to bundle a FASTA sequence and its quality data, but has recently become the de facto standard for storing the output of high-throughput sequencing instruments such as the Illumina Genome Analyzer.^[1]

Address of the bookmark: https://en.wikipedia.org/wiki/FASTQ_format

Quick next generation sequencing (NGS) terms definition

Neel — Fri, 09 Jun 2017 04:52:26 -0500

fragment size: the Illumina WGS protocol generates paired-end reads from both ends of longer fragments. The lengths of these fragments are assumed to be sampled from a normal distribution. Therefore, in the absence of structural variants, mapping locations of the paired ends span within an interval [δmin,δmax]. Most (>90%) of paired-end reads are sampled from no-SV regions, therefore the fragment size distribution can be learned empirically for each WGS data set separately.

concordant reads: a read pair is called concordant if they can be mapped to the reference genome as “expected”: (a) mapped to opposing strands where the upstream read is mapped to the forward strand and the downstream read is mapped to the reverse strand2, (b) the distance between ends is between the minimum and maximum expected fragment size.

discordant reads: briefly, any non-concordant read pair is considered discordant. Note that, by definition, the discordant read pairs signal potential SVs. The sequence signature produced by these type of reads is known as read-pair signature.

split reads: a read that can only be mapped to the reference genome by breaking into two sub-reads is called a split-read. These types of reads also indicate a potential SV or a short insertion or deletion (indel).

read depth: number of reads that map within a region of the genome. Overall genome-wide read depth is also referred to as depth of coverage. It is expected that the number of reads that “cover” each base-pair to follow a Poisson distribution. Therefore, if the read depth over a certain region deviates significantly from this distribution, it signals for a potential copy number variation (CNV).

PLAST: A fast, accurate and NGS scalable bank-to-bank sequence similarity search tool

Jit — Fri, 01 Dec 2017 04:10:54 -0600

PLAST is a fast, accurate and NGS scalable bank-to-bank sequence similarity search tool providing significant accelerations of seeds-based heuristic comparison methods, such as the Blast suite of algorithms.

Relying on unique software architecture, PLAST takes full advantage of recent multi-core personal computers without requiring any additional hardware devices.

PLAST stands for Parallel Local Sequence Alignment Search Tool and is was published in BMC Bioinformatics.

PLAST is a general purpose sequence comparison tool providing the following benefits:

PLAST is a high-performance sequence comparison tool designed to compare two sets of sequences (query vs. reference),
Reduces the processing time of sequences comparisons while providing highest quality results,
Contains a fully integrated data filtering engine capable of selecting relevant hits with user-defined criteria (E-Value, identity, coverage, alignment length, etc.),
Does not require any additional hardware, since it is a software solution. It is easy to install, cost-effective, takes full advantage of multi-core processors and uses a small RAM footprint,
Ready to be used on desktop computer, cluster, cloud as well as within distributed system running Hadoop.

https://plast.inria.fr/

Address of the bookmark: https://plast.inria.fr/

Porechop: tool for finding and removing adapters from Oxford Nanopore reads

Rahul Nayak — Tue, 29 May 2018 07:33:44 -0500

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

Address of the bookmark: https://github.com/rrwick/Porechop

Convert EnsEMBL GTF to Annotation table (Geneid, GeneSymbol, GeneWiseChrLocation, GeneClass, Strand) Raw

EagleEye — Fri, 24 Jun 2016 18:08:49 -0500

Bash Script source:

https://gist.github.com/santhilalsubhash/367befcf5216be4b1fd9

Information:

This script converts EnsEMBL GTF (Ex: https://gist.githubusercontent.com/santhilalsubhash/1e7cca357e52a181dc25/raw/cfb803e07900a2baefbb6534f1299fd30cb57a29/sample.GTF) file to annotation table format. It generated two files
1) Transcript wise chromosome location with information about transcripts (Ex: https://gist.githubusercontent.com/santhilalsubhash/c7dec516e0338503a4b6/raw/de0af1a39f0005c4ce7321c5ae57fc8b4a14c7f4/sample.GTF_enst_annotation.txt)
2) Gene wise chromosome location with information about genes (Ex: https://gist.githubusercontent.com/santhilalsubhash/c92006c5080f0333bec2/raw/d16e0b2440d73b09b486d3c9751cdb248a73fa0b/sample.GTF_ensg_annotation.txt)

Note: You can download GTF files from http://www.ensembl.org/info/data/ftp/index.html

BASE: a practical de novo assembler for large genomes using long NGS reads

Rahul Nayak — Fri, 19 Oct 2018 07:25:21 -0500

new de novo assembler called BASE. It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs.

Address of the bookmark: https://github.com/dhlbh/BASE

nQuire: A statistical framework for ploidy estimation using NGS short-read data

Jit — Thu, 31 Jan 2019 05:12:19 -0600

nQuire implements a set of commands to estimate ploidy level of individuals from species, where recent polyploidization occurred and intraspecific ploidy variation is observed. Specifically, nQuire uses next-generation sequencing data to distinguish between diploids, triploids and tetraploids, on the basis of frequency distributions at variant sites where only two bases are segregating.

For more background see also the publication at BMC Bioinformatics.

https://github.com/clwgg/nQuire

Address of the bookmark: https://github.com/clwgg/nQuire

IITM-Tokyo Tech Joint Symposium

Jit — Thu, 24 Oct 2019 10:30:25 -0500

The IITM-Tokyo Tech Joint Symposium is a biannual international symposium held in Indian Institute of Technology Madras (IITM), India in collaboration with Tokyo Institute of Technology (Tokyo-Tech), Japan. During the symposium, experts in various domains of Bioinformatics gather from India and Japan under one roof to discuss and present their works. This provides an unique opportunity to the researchers and students to learn the frontiers and interact with eminent scientists in Bioinformatics. The 5th IITM - Tokyo Tech Joint Symposium titled "Current trends in Bioinformatics: Big data analysis, machine learning and drug design", will be held on 6th - 7th March 2020 in IITM, Chennai, India.

The symposium will focus on topics in the below mentioned areas.

Topics: Algorithms for biomolecular sequences / structures Bioinformatics databases and tools Protein function Structure based drug design Machine learning Deep learning Large scale data analysis Big Data NGS Analysis Protein interactions/network Molecular modelling/docking/screening Biomolecular structure and function More

Info: https://web.iitm.ac.in/bioinfo2/symposium2020/home