BOL: Related items

Porechop: tool for finding and removing adapters from Oxford Nanopore reads

Rahul Nayak — Tue, 29 May 2018 07:33:44 -0500

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

Address of the bookmark: https://github.com/rrwick/Porechop

RNA-seq Analysis Workshop Course Materials

Jit — Tue, 03 Jul 2018 08:14:14 -0500

RNAseq can be roughly divided into two "types": Reference genome-based - an assembled genome exists for a species for which an RNAseq experiment is performed. It allows reads to be aligned against the reference genome and significantly improves our ability to reconstruct transcripts. This category would obviously include humans and most model organisms but excludes the majority of truly biologically intereting species (e.g., Hyacinth macaw); Reference genome-free - no genome assembly for the species of interest is available. In this case one would need to assemble the reads into transcripts using de novo approaches. This type of RNAseq is as much of an art as well as science because assembly is heavily parameter-dependent and difficult to do well. In this lesson we will focus on the Reference genome-based type of RNA seq. http://chagall.med.cornell.edu/RNASEQcourse/

Address of the bookmark: http://chagall.med.cornell.edu/RNASEQcourse/

Convert EnsEMBL GTF to Annotation table (Geneid, GeneSymbol, GeneWiseChrLocation, GeneClass, Strand) Raw

EagleEye — Fri, 24 Jun 2016 18:08:49 -0500

Bash Script source:

https://gist.github.com/santhilalsubhash/367befcf5216be4b1fd9

Information:

This script converts EnsEMBL GTF (Ex: https://gist.githubusercontent.com/santhilalsubhash/1e7cca357e52a181dc25/raw/cfb803e07900a2baefbb6534f1299fd30cb57a29/sample.GTF) file to annotation table format. It generated two files
1) Transcript wise chromosome location with information about transcripts (Ex: https://gist.githubusercontent.com/santhilalsubhash/c7dec516e0338503a4b6/raw/de0af1a39f0005c4ce7321c5ae57fc8b4a14c7f4/sample.GTF_enst_annotation.txt)
2) Gene wise chromosome location with information about genes (Ex: https://gist.githubusercontent.com/santhilalsubhash/c92006c5080f0333bec2/raw/d16e0b2440d73b09b486d3c9751cdb248a73fa0b/sample.GTF_ensg_annotation.txt)

Note: You can download GTF files from http://www.ensembl.org/info/data/ftp/index.html

ComparativeGenomics Exercise2

Neel — Wed, 22 Aug 2018 22:10:56 -0500

COMPARATIVE MICROBIAL GENOMICS ANALYSIS WORKSHOP @ cbs.dtu.dk

Free Bioinformatics workbench https://www.mn.uio.no/ifi/english/research/networks/clsi/earlier_seminars/2012/tammivesth_osloseminarfinal.pdf

CANU genome assembly parameters !

Rahul Nayak — Mon, 07 Jan 2019 08:40:37 -0600

Choose the appropriate parameters to run Canu and run it. The assembly will take about an hour. You can use two cores (parameter -maxThreads=2) and you would like to disable cluster option, since we compute on a single Amazon server set off the option to compute on cluster useGrid=false. This specifications should be for your project discussed with a local computing guru. The parameters that are in square brackets [] are optional, symbol | stands for "or".

usage:   canu [-correct | -trim | -assemble | -trim-assemble] \
              [-s ] \
               -p  \
               -d  \
               genomeSize=[g|m|k] \
               -maxThreads=2 \
               useGrid=false \
              [other-options] \
               read_file.fastq.gz

A default Canu run produces usually high quality assembly, example of a command that was used for testing can be found below. However, there are still a lot of parameters that are possible to tweak. For example if we desire to assemble haplotypes separately of if we want to smash them together, we can alternate the error correction process.

canu -p test_asmbl \
     -d asm_test3 \
     genomeSize=2m \
     -maxThreads=2 useGrid=false \
     -pacbio-raw \ ~/pacbio/dna/sample_reads.fastq.gz

There is a brilliant section in documentation about parameter tweaking.

The output directory contains will contain many files. The most interesting ones are:

*.correctedReads.fasta.gz : file containing the input sequences after correction, trim and split based on consensus evidence.
*.trimmedReads.fastq : file containing the sequences after correction and final trimming
*.layout : file containing informations about read inclusion in the final assembly
*.gfa : file containing the assembly graph by Canu
*.contigs.fasta : file containing everything that could be assembled and is part of the primary assembly

The basic stats of assembly can be read from reports generated by the assembler, or calculated using standard UNIX command line tools.

More at https://canu.readthedocs.io/en/latest/faq.html

Introduction to Bioinformatics

eliabrodsky — Wed, 05 Jun 2019 14:58:11 -0500

Introduction to bioinformatics is a course for biologists and clinicians that would like to learn more about the way bioinformatics is used in healthcare, biotech and pharmaceuitcal industry as well as basic research. The course covers many of the topics transformed by the emergence of big data and computational technologies. To learn more about the course, visit: https://edu.t-bio.info/course/introduction-bioinformatics/

Bioinformatics Training Courses At RASA LSI

RASA Life Sciences — Wed, 06 Nov 2019 00:30:51 -0600

RASA conducts comprehensive Life Science skill development training courses in Pune, India for working professionals, researchers, students and job-seeker. The trainings are crafted meticulously, covering different modules of courses such as Bioinformatics course, In silico Drug Discovery course, Next Generation Sequence data analysis course, Molecular Biology & Life science software development course wherein you learn from industry leaders how to apply these skills in life science & have a command over software developing process by using various methodologies. We conduct in-class training and instructor-led live online classes worldwide, along with corporate and skill development training worldwide.

Workshops are conducted in regular intervals on Drug Designing, Protein Modeling and Simulation, Chemoinformatics, Bioinformatics etc.The workshops are highly beneficial for working professionals, students, researcher for enhancements of the skills in short duration.

ClinCNV: Detection of copy number changes in Germline/Trio/Somatic contexts in NGS data

Neel — Thu, 16 Jan 2020 23:16:02 -0600

ClinCNV detects CNVs in germline and somatic context in NGS data (targeted and whole-genome). We work in cohorts, so it makes sense to try ClinCNV if you have more than 10 samples (recommended amount - 40 since we estimate variances from the data). By "cohort" we mean samples sequenced with the same enrichment kit with approximately the same depth (ie 1x WGS and 30x WGS better be analysed in separate runs of ClinCNV). Of course it is better if your samples were sequenced within the same sequencing facility.

Address of the bookmark: https://github.com/imgag/ClinCNV

Postdoctoral scientist genome analytics/ genome bioinformatics (m/f/*)

Sun, 16 Feb 2020 02:57:40 -0600

https://www.uksh.de/jobs/Stellenangebote-nr-20190570-p-8.html
Your profile:
Degree in bioinformatics, biostatistics, or equivalent
Experience in the processing and analysis of large-scale genomics data using compute clusters / high-performance computing
Strong competence in working in Unix/Linux environments (shell)
Strong programming skills (in particular: Python, R, Perl)
Experience with using git and snakemake
Fluent English language skills, both spoken and written
Strong communication skills and motivation to work in a young, interdisciplinary, dynamic team

Additional Information:

If you have any questions about scientific aspects of this position, please contact Prof. Lars Bertram, head of LIGA (lars.bertram@uni-luebeck.de).

Please contact Ms. Anna Wolbert for further questions about administrative details (recruiting@uksh.de).

Weitere Informationen erhalten Sie auch unter www.uksh.de/karriere.

Wir freuen uns auf Ihre Bewerbung bis zum 15.03.2020 unter Angabe unserer Ausschreibungsnummer 20190570.119.CL.

Nanopolis: polish a genome assembly

Rahul Nayak — Thu, 26 Jul 2018 04:51:28 -0500

Software package for signal-level analysis of Oxford Nanopore sequencing data. Nanopolish can calculate an improved consensus sequence for a draft genome assembly, detect base modifications, call SNPs and indels with respect to a reference genome and more (see Nanopolish modules, below).

Quickstart

http://nanopolish.readthedocs.io/en/latest/quickstart_consensus.html

Algorithms

http://simpsonlab.github.io/2017/06/30/nanopolish-v0.7.0/

Address of the bookmark: https://github.com/jts/nanopolish