BOL: Related items

PERGA: A Paired-End Read Guided De Novo Assembler for Extending Contigs Using SVM and Look Ahead Approach

Rahul Nayak — Tue, 05 Jun 2018 09:57:11 -0500

PERGA - Paired End Reads Guided Assembler PERGA is a novel sequence reads guided de novo assembly approach which adopts greedy-like prediction strategy for assembling reads to contigs and scaffolds. Instead of using single-end reads to construct contig, PERGA uses paired-end reads and different read overlap sizes from O ≥ Omax to Omin to resolve the gaps and branches. Moreover, by constructing a decision model using machine learning approach based on branch features, PERGA can determine the correct extension in 99.7% of cases. PERGA will try to extend the contigs by all feasible nucleotides and determine if these multiple extensions due to sequencing errors or repeats by using looking ahead technology, and it also try to separate the different repeats of nearby genomic regions to make the assembly result more longer and accurate. The simulated E.coli paired-end reads data are generated using GemSim (KE McElroy, F Luciani, T Thomas. Gemsim: General, Error-Model Based Simulator of Next-Generation Sequencing Data. BMC Genomics 2012, 13:74), with coverage 50x, 60x, 100x, read lengths 100-bp, and can be downloaded from https://github.com/zhuxiao/data_PERGA.

Address of the bookmark: https://github.com/hitbio/PERGA

Read Simulators

Abhi — Fri, 30 Sep 2022 06:48:18 -0500

Short Read Simulators

With the popularity of next-generation sequencing (NGS) technologies, many NGS read simulators have been developed. Currently, many of the popular short read simulators are designed to simulate reads mimicking many Illumina, 454 and SOLiD platforms. Listed below are some popular short read simulators. Links to their publications are provided as well.

Long Read Simulators

With the advancements in sequencing technologies, scientists have shown an increasing interest in using third-generation sequencing (TGS) technologies. Currently, many of the popular long read simulators are designed to simulate reads mimicking the two main TGS technologies; (1) Pacific Biosciences (PacBio) and (2) Oxford Nanopore (ONT). Listed below are some of the popular and recently introduced PacBio and ONT simulators. Links to their publications are provided as well.

PacBio Simulators

ONT Simulators

proovread : large-scale high-accuracy PacBio correction through iterative short read consensus

Jit — Fri, 05 Jan 2018 04:12:20 -0600

proovread : large-scale high-accuracy PacBio correction through iterative short read consensus

outperforms PacBioToCA/LSC in terms of accuracy and contiguity/sensitivity (http://dx.doi.org/10.1093/bioinformatics/btu392)
is easy to install/run/configure
supports various types of dat
- HiSeq/MiSeq (100-500bp)
- Unitigs
- 454, ...

proovread maps high coverage data to pacbio reads (bwa mem, blasr, daligner) in multiple iterations.

Address of the bookmark: https://github.com/BioInf-Wuerzburg/proovread

SALSA: A tool to scaffold long read assemblies with Hi-C

Jit — Fri, 15 Jun 2018 04:01:15 -0500

This code is used to scaffold your assemblies using Hi-C data. This version implements some improvements in the original SALSA algorithm. If you want to use the old version, it can be found in the old_salsa branch. To use the latest version, first run the following commands: cd SALSA make To run the code, you will need Python 2.7, BOOST libraries and Networkx(version lower than 1.2). If you consider using this tool, please cite our publication which describes the methods used for scaffolding. Ghurye, J., Pop, M., Koren, S., Bickhart, D., & Chin, C. S. (2017). Scaffolding of long read assemblies using long range contact information. BMC genomics, 18(1), 527. Link Ghurye, J., Rhie, A., Walenz, B.P., Schmitt, A., Selvaraj, S., Pop, M., Phillippy, A.M. and Koren, S., 2018. Integrating Hi-C links with assembly graphs for chromosome-scale assembly. bioRxiv, p.261149 Link For any queries, please either ask on github issue page or send an email to Jay Ghurye (jayg@cs.umd.edu).

Address of the bookmark: https://github.com/machinegun/SALSA

SimLoRD: A read simulator for third generation sequencing reads

Aaryan Lokwani — Wed, 22 Aug 2018 10:40:27 -0500

SimLoRD is a read simulator for third generation sequencing reads and is currently focused on the Pacific Biosciences SMRT error model.

Reads are simulated from both strands of a provided or randomly generated reference sequence.

The reference can be read from a FASTA file or randomly generated with a given GC content. It can consist of several chromosomes, whose structure is respected when drawing reads. (Simulation of genome rearrangements may be incorporated at a later stage.)
The read lengths can be determined in four ways: drawing from a log-normal distribution (typical for genomic DNA), sampling from an existing FASTQ file (typical for RNA), sampling from a a text file with integers (RNA), or using a fixed length
Quality values and number of passes depend on fragment length.
Provided subread error probabilities are modified according to number of passes
Outputs reads in FASTQ format and alignments in SAM format

Address of the bookmark: https://bitbucket.org/genomeinformatics/simlord/

URMAP, an ultra-fast read mapper

Jit — Thu, 29 Oct 2020 23:03:54 -0500

URMAP, a new read mapping algorithm. URMAP is an order of magnitude faster than BWA with comparable accuracy on several validation tests. On a Genome in a Bottle (GIAB) variant calling test with 30× coverage 2×150 reads, URMAP achieves high accuracy (precision 0.998, sensitivity 0.982 and F-measure 0.990) with the strelka2 caller. However, GIAB reference variants are shown to be biased against repetitive regions which are difficult to map and may therefore pose an unrealistically easy challenge to read mappers and variant callers.

More at https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7320720/

Address of the bookmark: https://github.com/rcedgar/urmap

Darwin-WGA: A Co-processor Provides Increased Sensitivity in Whole Genome Alignments with High Speedup

Jit — Sat, 13 Apr 2019 08:55:31 -0500

Darwin-WGA, is the first hardware accelerator for whole genome alignment and accelerates the gapped filtering stage. Darwin-WGA also employs GACT-X, a novel algorithm used in the extension stage to align arbitrarily long genome sequences using a small on-chip memory, that provides better quality alignments at 2× improvement in memory and speed over the previously published GACT algorithm. Implemented on an FPGA, Darwin-WGA provides up to 24× improvement (performance/$) in WGA over iso-sensitive software.

https://stanford.edu/~yatisht/pubs/darwin-wga.pdf

Address of the bookmark: https://github.com/gsneha26/Darwin-WGA

List of visualization tools for genome alignments

Rahul Nayak — Fri, 02 Feb 2018 13:25:33 -0600

Genome browsers are useful not only for showing final results but also for improving analysis protocols, testing data quality, and generating result drafts. Its integration in analysis pipelines allows the optimization of parameters, which leads to better results. But sometime, we need publication ready figure of genomes. Following are the list of genome alignment visualization tools, which could be useful for analysis and interpretation of results:

ABySS Explorer

Interactive Java application that uses a novel graph-based representation to display a sequence assembly and associated metadata

http://www.bcgsc.ca/platform/bioinfo/software/abyss-explorer

BamView

Genome browser and annotation tool that allows visualization of sequence features, next-generation sequencing (NGS) data and the results of analyses within the context of the sequence, and also its six-frame translation

http://www.sanger.ac.uk/resources/software/artemis/

DNannotator

Annotation web toolkit for regional genomic sequences

http://bioapp.psych.uic.edu/DNannotator.htm

JVM

Java Visual Mapping tool for NGS reads

http://www.springer.com/cda/content/document/cda_downloaddocument/9789401792448-c2.pdf?SGWID=0-0-45-1487072-p176815501

LookSeq

Web-based visualization of sequences derived from multiple sequencing technologies. Low- or high-depth read pileups and easy visualization of putative single nucleotide and structural variation

http://lookseq.sourceforge.net

MagicViewer

Visualization of short read alignment, identification of genetic variation and association with annotation information of a reference genome

http://bioinformatics.zj.cn/magicviewer/

MapView

Alignments of huge-scale single-end and pair-end short reads

http://omictools.com/mapview-s1367.html

MultiPipMaker

Computes alignments of similar regions in two DNA sequences. The resulting alignments are summarized with a ‘percent identity plot’ (pip)

http://pipmaker.bx.psu.edu/pipmaker/

PileLineGUI

Handling genome position files in NGS studies

http://sing.ei.uvigo.es/pileline/pilelinegui.html

SAMtools tview

Simple and fast text alignment viewer; NGS compatible

http://www.htslib.org/

SEWAL

Uses a locality-sensitive hashing algorithm to enumerate all unique sequences in an entire Illumina sequencing run

http://www.sourceforge.net/projects/sewal

STAR

A web-based integrated solution to management and visualization of sequencing data

http://wanglab.ucsd.edu/star/browser

SVA

Software for annotating and visualizing sequenced human genomes

http://www.svaproject.org

Viewer (IGV)

Visualization of large heterogeneous datasets, providing a smooth and intuitive user experience at all levels of genome resolution

https://www.broadinstitute.org/igv/

ZOOM Lite

NGS data mapping and visualization software

http://bioinfor.com/zoom/lite/

STELLAR: fast and exact local alignments

Neel — Wed, 29 Aug 2018 16:00:46 -0500

STELLAR is very practical and fast on very long sequences which makes it a suitable new tool for finding local alignments between genomic sequences under the edit distance model. Binaries are freely available for Linux, Windows, and Mac OS X at http://www.seqan.de/projects/stellar.

Address of the bookmark: http://www.seqan.de/apps/stellar/

SVbyEye: R Package to visualize alignments between two or multiple DNA sequences

LEGE — Tue, 17 Sep 2024 02:34:57 -0500

R Package to visualize alignments between two or multiple DNA sequences including
a number of functionalities to facilitate processing of alignments in PAF format.

SVbyEye, an open-source R package to visualize and annotate sequence-to-sequence alignments along with various functionalities to process alignments in PAF format. The tool facilitates the characterization of complex SVs in the context of sequence homology helping resolve the mechanisms underlying their formation. Availability and implementation SVbyEye is available at https://github.com/daewoooo/SVbyEye.

Author: David Porubsky

Address of the bookmark: https://github.com/daewoooo/SVbyEye