BOL: Related items

BBSplit: Read Binning Tool for Metagenomes and Contaminated Libraries

Poonam Mahapatra — Wed, 03 Jan 2018 00:25:27 -0600

BBSplit internally uses BBMap to map reads to multiple genomes at once, and determine which genome they match best. This is different than with ordinary mapping. If a genome (say, human) contains an exact repeat somewhere, reads mapping to it will be mapped ambiguously. But if you want to determine whether reads are mouse or human, it does not matter whether they map ambiguously within human, only whether they are ambiguous between human and mouse. BBSplit tracks this additional ambiguity information and decides how to use it based on the “ambig2” flag. The normal use of BBSplit is like Seal, either quantifying how many reads go to each reference, or splitting the reads into multiple output files, one per reference. BBSplit can only be run using references indexed with BBSplit, as they contain additional information regarding which sequences came from which reference file.

BBSplit is a tool that bins reads by mapping to multiple references simultaneously, using BBMap. The reads go to the bin of the reference they map to best. There are also disambiguation options, such that reads that map to multiple references can be binned with all of them, none of them, one of them, or put in a special "ambiguous" file for each of them. Paired reads will always be kept together.

For example, if you had a library of something that was contaminated with e.coli and salmonella, you could do this:

bbsplit.sh in=reads.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu=clean.fq int=t

This will produce 3 output files:
out_ecoli.fq (ecoli reads)
out_salmonella.fq (salmonella reads)
clean.fq (unmapped reads)

In this case, "int=t" means that the input file is paired and interleaved. For single-end reads you would leave that out. For paired reads in 2 files, you would do this:
bbsplit.sh in1=reads1.fq in2=reads2.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu1=clean1.fq outu2=clean2.fq

BBSplit is available here:
https://sourceforge.net/projects/bbmap/

The sensitivity can be raised to be equivalent to BBMap with these flags: "minratio=0.56 minhits=1 maxindel=16000"

PureCN: copy number calling and SNV classification using targeted short read sequencing

Jit — Thu, 09 Aug 2018 04:09:37 -0500

This package estimates tumor purity, copy number, and loss of heterozygosity (LOH), and classifies single nucleotide variants (SNVs) by somatic status and clonality. PureCN is designed for targeted short read sequencing data, integrates well with standard somatic variant detection and copy number pipelines, and has support for tumor samples without matching normal samples.

Author: Markus Riester [aut, cre], Angad P. Singh [aut]

Maintainer: Markus Riester

Citation (from within R, enter citation("PureCN")):

Riester M, Singh A, Brannon A, Yu K, Campbell C, Chiang D, Morrissey M (2016). “PureCN: Copy number calling and SNV classification using targeted short read sequencing.” Source Code for Biology and Medicine, 11, 13. doi: 10.1186/s13029-016-0060-z.

Address of the bookmark: http://bioconductor.org/packages/release/bioc/html/PureCN.html

CovCal: Coverage / Read Count Calculator

Jit — Wed, 15 Jun 2016 18:08:13 -0500

Coverage / Read Count Calculator

Calculate how much sequencing you need to hit a target depth of coverage (or vice versa).

Instructions: set the read length/configuration and genome size, then select what you want to calculate.

Written by Stephen Turner, based on the Lander-Waterman formula, inspired by a similar calculator written by James Hadfield. Coverage is calculated as C=LN/G and reads as N=CG/L where C = Coverage (X),L = Read length (bp), G = Haploid genome size (bp), and N = Number of reads. Source code on GitHub.

Address of the bookmark: http://apps.bioconnector.virginia.edu/covcalc/

SIMBA: a web tool for managing bacterial genome assembly generated by Ion PGM sequencing technology

Abhimanyu Singh — Tue, 23 May 2017 05:28:56 -0500

SIMBA, SImple Manager for Bacterial Assemblies, is a Web interface for managing assembly projects of bacterial genomes. SIMBA was created to assist bioinformaticians to assemble bacterial genomes sequenced with NextGeneration Sequencing (NGS) platforms quickly, easily and effectively. SIMBA also is open source tool, i.e., can be freely downloaded, shared and modified.

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1344-7

Address of the bookmark: http://ufmg-simba.sourceforge.net/

TelomereHunter

Jit — Fri, 02 Feb 2018 04:23:59 -0600

TelomereHunter is a tool for estimating telomere content from human whole-genome sequencing data. It is designed to take BAM files from a tumor and a matching control sample as input. However, it is also possible to run TelomereHunter with one input file. TelomereHunter extracts and sorts telomeric reads from the input sample(s). For the estimation of telomere content, GC biases are taken into account. Finally, the results of TelomereHunter are visualized in several diagrams.

TelomereHunter is available for download at the following address: https://pypi.python.org/pypi/telomerehunter/

Address of the bookmark: http://www.dkfz.de/en/applied-bioinformatics/telomerehunter/telomerehunter.html

iSeqQC: a tool for expression-based quality control in RNA sequencing

BioStar — Sun, 16 Feb 2020 08:47:17 -0600

iSeqQC, an expression-based QC tool that detects outliers either produced due to variable laboratory conditions or due to dissimilarity within a phenotypic group. iSeqQC implements various statistical approaches including unsupervised clustering, agglomerative hierarchical clustering and correlation coefficients to provide insight into outliers.

http://cancerwebpa.jefferson.edu/iSeqQC/

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-020-3399-8

Address of the bookmark: https://github.com/gkumar09/iSeqQC

MetaGraph: Ultra Scalable Framework for DNA Search, Alignment, Assembly

Abhi — Sat, 08 Jun 2024 16:15:25 -0500

The MetaGraph framework is designed to work with a wide range of input data sets, indexing from a few samples up to the contents of entire archives with hundreds of thousands of records. The indexing workflow always follows the same principle, transforming single input samples into error-removed, refined sample graphs, which are then merged into a joint metagraph index. Each input sample is annotated in the joint index as a subgraph. This graph index enriched with metadata can then be used for downstream applications such as sequence search or differential assembly.

Searcg link https://metagraph.ethz.ch/search

Pre-print https://www.biorxiv.org/content/10.1101/2020.10.01.322164v4

Address of the bookmark: https://metagraph.ethz.ch/

MUMmer4: A fast and versatile genome alignment system

Jit — Sat, 03 Feb 2018 04:59:17 -0600

MUMmer4, a substantially improved version of MUMmer that addresses genome size constraints by changing the 32-bit suffix tree data structure at the core of MUMmer to a 48-bit suffix array, and that offers improved speed through parallel processing of input query sequences. With a theoretical limit on the input size of 141Tbp, MUMmer4 can now work with input sequences of any biologically realistic length. We show that as a result of these enhancements, the nucmer program in MUMmer4 is easily able to handle alignments of large genomes;

Address of the bookmark: https://mummer4.github.io/

AlignQC: A tool for assessing an alignment, and generating reports that are easy to share

Jit — Tue, 07 Aug 2018 04:41:07 -0500

Long read alignment analysis. Generate a reports on sequence alignments for mappability vs read sizes, error patterns, annotations and rarefraction curve analysis. The most basic analysis only requires a BAM file, and outputs a web browser compatible xhtml to visualize/share/store/extract analysis results.

https://f1000research.com/articles/6-100/

https://github.com/jason-weirather/AlignQC

Address of the bookmark: https://www.healthcare.uiowa.edu/labs/au/AlignQC/

Shouji: a fast and efficient pre-alignment filter for sequence alignment

Jit — Mon, 04 Nov 2019 07:09:45 -0600

The ability to generate massive amounts of sequencing data continues to overwhelm the processing capacity of existing algorithms and compute infrastructures. In this work, we explore the use of hardware/software co-design and hardware acceleration to significantly reduce the execution time of short sequence alignment, a crucial step in analyzing sequenced genomes.

We introduce Shouji, a highly parallel and accurate pre-alignment filter that remarkably reduces the need for computationally-costly dynamic programming algorithms. The first key idea of our proposed pre-alignment filter is to provide high filtering accuracy by correctly detecting all common subsequences shared between two given sequences. The second key idea is to design a hardware accelerator design that adopts modern FPGA (field-programmable gate array) architectures to further boost the performance of our algorithm.

More at https://github.com/CMU-SAFARI/Shouji

Address of the bookmark: https://github.com/CMU-SAFARI/Shouji