Features

• Linear representation of several segments of DNA
• Comparisons represented by areas between the segments (like Artemis, for example)
• Reads from common formats: Genbank, EMBL, blast, Mauve, and from user-generated tab files
• Plot several subsegments of the same segment on the same line, separated by a //
• Automatic or manual placement of the segments on the plot
• Add annotations to all the lines
• Create smart, automatic annotations for genomes, based on gene names
• Add a user-generated tree
• Add a global scale or a scale to each line
• Use user-defined graphical functions to represent genes

Address of the bookmark: http://genoplotr.r-forge.r-project.org/

usage:   canu [-correct | -trim | -assemble | -trim-assemble] \
              [-s ] \
               -p  \
               -d  \
               genomeSize=[g|m|k] \
               -maxThreads=2 \
               useGrid=false \
              [other-options] \
               read_file.fastq.gz

A default Canu run produces usually high quality assembly, example of a command that was used for testing can be found below. However, there are still a lot of parameters that are possible to tweak. For example if we desire to assemble haplotypes separately of if we want to smash them together, we can alternate the error correction process.

canu -p test_asmbl \
     -d asm_test3 \
     genomeSize=2m \
     -maxThreads=2 useGrid=false \
     -pacbio-raw \ ~/pacbio/dna/sample_reads.fastq.gz

There is a brilliant section in documentation about parameter tweaking.

The output directory contains will contain many files. The most interesting ones are:

• *.correctedReads.fasta.gz : file containing the input sequences after correction, trim and split based on consensus evidence.
• *.trimmedReads.fastq : file containing the sequences after correction and final trimming
• *.layout : file containing informations about read inclusion in the final assembly
• *.gfa : file containing the assembly graph by Canu
• *.contigs.fasta : file containing everything that could be assembled and is part of the primary assembly

The basic stats of assembly can be read from reports generated by the assembler, or calculated using standard UNIX command line tools.

More at https://canu.readthedocs.io/en/latest/faq.html

In this report, we compare and evaluate several genome assembly software based on TSG technology. The experimentation has been performed on 4 reference genomes and the results evaluated with the QUAST software. The 11 software that have been evaluated are: Celera Assembler , Falcon , Miniasm, Newbler , SGA Assembler, Smartdenovo, Abruijn, Ra, DBG2OLC, Spades and Cerulean. The first 8 software use only long reads, while the 3 last software can merge long and short reads

Address of the bookmark: http://genomearchitect.github.io/

Scientists have reconstructed the genome of an ancient human who lived nearly 5,700 years ago in Southern Denmark from the birch pitch- an ancient tar-like substance.

By sequencing the sample, researchers not only discovered the ancient human DNA but also microbial DNA reflecting the oral microbiome of the person who chewed the pitch, along with plant and animal DNA that could be the recent meal she might have consumed.

The DNA sample is comparable in quality to well-preserved teeth and skull bones. The DNA suggests that the chewer was a female, most likely with dark skin, dark brown hair and blue eyes.

More at https://github.com/ekg/mutatrix

./mutatrix -S sample -P test/ -p 2 -n 10 reference.fasta

Address of the bookmark: https://github.com/ekg/mutatrix

The Shenzhen company says the low cost will be possible with an “extreme” DNA sequencing system it plans to offer that is capable of decoding the genomes of 100,000 people a year.

Ref: https://www.technologyreview.com/s/615289/china-bgi-100-dollar-genome/

Address of the bookmark: https://github.com/AppliedBioinformatics/RefKA

1 Falcon https://github.com/PacificBiosciences/pb-assembly

2 Canu assembler http://canu.readthedocs.io/en/latest/index.html

3 Miniasm assembler https://github.com/lh3/miniasm

4 PBJelly scaffolding tool https://sourceforge.net/projects/pb-jelly/

5 ARCS scaffolding tool https://github.com/bcgsc/arcs

6 Redundans reduction and scaffolding tool https://github.com/Gabaldonlab/redundans

7 Arrow error correction https://github.com/PacificBiosciences/ GenomicConsensus

8 PILON error correction https://github.com/broadinstitute/pilon/wiki

9 BUSCO single copy gene markers http://busco.ezlab.org/

10 Bandage graph assembly viewer https://rrwick.github.io/Bandage/

11 Gepard dotter http://cube.univie.ac.at/gepard

12 MUMmer aligner and plotter http://mummer.sourceforge.net/

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD