BOL: Related items

LRCstats: a tool for evaluating long reads correction methods

Aaryan Lokwani — Wed, 22 Aug 2018 11:05:04 -0500

LRCstats is an open-source pipeline for benchmarking DNA long read correction algorithms for long reads outputted by third generation sequencing technology such as machines produced by Pacific Biosciences. The reads produced by third generation sequencing technology, as the name suggests, are longer in length than reads produced by next generation sequencing technologies, such as those produced by Illumina. However, long reads are plagued by high error rates, which can cause issues in downstream analysis. Long read correction algorithms reduce the error rate of long reads either through self-correcting methods or using accurate, short reads outputted by next generation sequencing technologies to correct long reads.

Address of the bookmark: https://github.com/cchauve/lrcstats

BASE: a practical de novo assembler for large genomes using long NGS reads

Rahul Nayak — Fri, 19 Oct 2018 07:25:21 -0500

new de novo assembler called BASE. It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs.

Address of the bookmark: https://github.com/dhlbh/BASE

Deepbinner: a signal-level demultiplexer for Oxford Nanopore reads

Neel — Tue, 27 Nov 2018 03:38:49 -0600

Deepbinner is a tool for demultiplexing barcoded Oxford Nanopore sequencing reads. It does this with a deep convolutional neural network classifier, using many of the architectural advances that have proven successful in image classification. Unlike other demultiplexers (e.g. Albacore and Porechop), Deepbinner identifies barcodes from the raw signal (a.k.a. squiggle) which gives it greater sensitivity and fewer unclassified reads.

Reasons to use Deepbinner:
- To minimise the number of unclassified reads (use Deepbinner by itself).
- To minimise the number of misclassified reads (use Deepbinner in conjunction with Albacore demultiplexing).
- You plan on running signal-level downstream analyses, like Nanopolish. Deepbinner can demultiplex the fast5 fileswhich makes this easier.
Reasons to not use Deepbinner:
- You only have basecalled reads not the raw fast5 files (which Deepbinner requires).
- You have a small/slow computer. Deepbinner is more computationally intensive than Porechop.
- You used a sequencing/barcoding kit other than the ones Deepbinner was trained on.

Address of the bookmark: https://github.com/rrwick/Deepbinner

SViper: Swipe your Structural Variants called on long (ONT/PacBio) reads with short exact (Illumina) reads.

Neel — Sun, 22 Dec 2019 03:48:28 -0600

Call sviper

~$ ./sviper -s short-reads.bam -l long-reads.bam -r ref.fa -c variants.vcf -o polished_variants

This will output a polished_variants.vcf file, that contains all the refined variants.

Sometimes it is helpful to look at the polished sequence, e.g. with the IGV browser. In that case you want SViper to output the polished and aligned sequences in a bam file via the option --output-polished-bam:

~$ ./sviper -s short-reads.bam -l long-reads.bam -r ref.fa -c variants.vcf -o polished_variants --output-polished-bam

Address of the bookmark: https://github.com/smehringer/SViper

Free Genomics data !

BioStar — Fri, 07 Feb 2020 14:08:31 -0600

The specimens were collected by the Oxford Wytham Woods and Edinburgh Lohse lab teams. DNA extraction and sequencing was carried out by the Sanger Institute Scientific Operations teams. Assemblies were carried out by the Tree of Life team (Shane McCarthy) and colleagues in Pacific Biosciences (Jonas Korlach).

https://www.darwintreeoflife.org/an-initial-set-of-raw-genome-assemblies-from-the-darwin-tree-of-life-project/

Address of the bookmark: https://www.darwintreeoflife.org/an-initial-set-of-raw-genome-assemblies-from-the-darwin-tree-of-life-project/

Filtlong: quality filtering tool for long reads

Radha Agarkar — Wed, 13 May 2020 10:23:55 -0500

Filtlong is a tool for filtering long reads by quality. It can take a set of long reads and produce a smaller, better subset. It uses both read length (longer is better) and read identity (higher is better) when choosing which reads pass the filter.

Filtlong builds into a stand-alone executable:

git clone https://github.com/rrwick/Filtlong.git
cd Filtlong
make -j
bin/filtlong -h

Address of the bookmark: https://github.com/rrwick/Filtlong

Hifiasm: a haplotype-resolved assembler for accurate Hifi reads

Jit — Thu, 24 Dec 2020 10:03:36 -0600

Hifiasm is a fast haplotype-resolved de novo assembler for PacBio Hifi reads. It can assemble a human genome in several hours and works with the California redwood genome, one of the most complex genomes sequenced so far. Hifiasm can produce primary/alternate assemblies of quality competitive with the best assemblers. It also introduces a new graph binning algorithm and achieves the best haplotype-resolved assembly given trio data.

Address of the bookmark: https://github.com/chhylp123/hifiasm

Bioinformatics tools for telomere to telomere assembly !

BioStar — Tue, 17 Aug 2021 13:17:09 -0500

● Merfin – k-mer-based assembly and variant calling evaluation for improved consensus accuracy (Arang Rhie)
● PanGenie – algorithm that leverages a pangenome reference built from haplotype-resolved genome assemblies in conjunction with k-mer count information from raw, short-read sequencing data to genotype a wide spectrum of genetic variation (Tobias Marschall)
● SQANTI3 – an automated pipeline for the classification of long-read transcripts that can assess the quality of data and the preprocessing pipeline (Rocío Amorín de Hegedüs @rocioadh)
● tama (Transcriptome Annotation by Modular Algorithms) – software designed for processing Iso-Seq data and other long-read transcriptome data (Richard Kuo @GenomeRIK)
● pbaa (PacBio Amplicon Analysis) – separates complex mixtures of amplicon targets from genomic samples to cluster and generate high-quality consensus sequences from HiFi reads (Zev Kronenberg @zevkronenberg)
● bellerophon – analyzes MHC typing and other low-complexity gene amplicon data; performs allele calling while detecting polymorphic sites within the sequences and removing potential chimeric sequence variants (Yuanyuan Cheng @Yuanyuan929)
● svpack – tools for filtering, comparing, and annotating structural variant (SV) calls in VCF format (Aaron Wenger)
● JumboDB – tool for de Bruijn graph construction (Anton Bankevich @AntonBankevich)
● uLTRA – tool for splice alignment of long transcriptomic reads to a genome, guided by a database of exon annotations. (Kristoffer Sahlin @krsahlin)
● LeafGo – workflow to rapidly produce high-quality de novo plant genomes (Luca Ermini @ermini_luca)

Reference:

https://www.pacb.com/blog/young-investigators-share-stellar-science-career-advice-and-bioinformatics-tools-at-smrt-leiden-2021/

Stacks

Jitendra Narayan — Wed, 24 Feb 2016 15:52:30 -0600

Stacks is a software pipeline for building loci from short-read sequences, such as those generated on the Illumina platform. Stacks was developed to work with restriction enzyme-based data, such as RAD-seq, for the purpose of building genetic maps and conducting population genomics and phylogeography.

More at http://catchenlab.life.illinois.edu/stacks/

Address of the bookmark: http://catchenlab.life.illinois.edu/stacks/

ALE: a Generic Assembly Likelihood Evaluation Framework for Assessing the Accuracy of Genome and Metagenome Assemblies

Neel — Tue, 26 Apr 2016 03:38:43 -0500

Assembly Likelihood Evaluation (ALE) framework that overcomes these limitations, systematically evaluating the accuracy of an assembly in a reference-independent manner using rigorous statistical methods. This framework is comprehensive, and integrates read quality, mate pair orientation and insert length (for paired-end reads), sequencing coverage, read alignment and k-mer frequency. ALE pinpoints synthetic errors in both single and metagenomic assemblies, including single-base errors, insertions/deletions, genome rearrangements and chimeric assemblies presented in metagenomes. At the genome level with real-world data, ALE identifies three large misassemblies from the Spirochaeta smaragdinae finished genome, which were all independently validated by Pacific Biosciences sequencing. At the single-base level with Illumina data, ALE recovers 215 of 222 (97%) single nucleotide variants in a training set from a GC-rich Rhodobacter sphaeroides genome. Using real Pacific Biosciences data, ALE identifies 12 of 12 synthetic errors in a Lambda Phage genome, surpassing even Pacific Biosciences' own variant caller, EviCons. In summary, the ALE framework provides a comprehensive, reference-independent and statistically rigorous measure of single genome and metagenome assembly accuracy, which can be used to identify misassemblies or to optimize the assembly process.

More at http://www.ncbi.nlm.nih.gov/pubmed/23303509

Address of the bookmark: http://sc932.github.io/ALE/about.html