Identify pairs of contigs that are syntenic and move one of them to the haplotig 'pool'. The pipeline uses mapped read coverage and Minimap2 alignments to determine which contigs to keep for the haploid assembly. Dotplots are optionally produced for all flagged contig matches, juxtaposed with read-coverage, to help the user determine the proper assignment of any remaining ambiguous contigs. The pipeline will run on either a haploid assembly (i.e. Canu, FALCON or FALCON-Unzip primary contigs) or on a phased-diploid assembly (i.e. FALCON-Unzip primary contigs + haplotigs). Here are two examples of how Purge Haplotigs can improve a haploid and diploid assembly.

Address of the bookmark: https://bitbucket.org/mroachawri/purge_haplotigs

usage:   canu [-correct | -trim | -assemble | -trim-assemble] \
              [-s ] \
               -p  \
               -d  \
               genomeSize=[g|m|k] \
               -maxThreads=2 \
               useGrid=false \
              [other-options] \
               read_file.fastq.gz

A default Canu run produces usually high quality assembly, example of a command that was used for testing can be found below. However, there are still a lot of parameters that are possible to tweak. For example if we desire to assemble haplotypes separately of if we want to smash them together, we can alternate the error correction process.

canu -p test_asmbl \
     -d asm_test3 \
     genomeSize=2m \
     -maxThreads=2 useGrid=false \
     -pacbio-raw \ ~/pacbio/dna/sample_reads.fastq.gz

There is a brilliant section in documentation about parameter tweaking.

The output directory contains will contain many files. The most interesting ones are:

• *.correctedReads.fasta.gz : file containing the input sequences after correction, trim and split based on consensus evidence.
• *.trimmedReads.fastq : file containing the sequences after correction and final trimming
• *.layout : file containing informations about read inclusion in the final assembly
• *.gfa : file containing the assembly graph by Canu
• *.contigs.fasta : file containing everything that could be assembled and is part of the primary assembly

The basic stats of assembly can be read from reports generated by the assembler, or calculated using standard UNIX command line tools.

More at https://canu.readthedocs.io/en/latest/faq.html

Address of the bookmark: http://genomearchitect.github.io/

Address of the bookmark: https://github.com/yjx1217/simuG

https://academic.oup.com/nar/article/47/11/e63/5377471

Address of the bookmark: https://github.com/linzhi2013/MitoZ

https://liulab-dfci.github.io/software/

To create single-genome plot by aligning genome data along all chromosomes of a single genome, go to the Single-genome plot menu.

To cretae two-genome plot for comparison of data across two genomes, go to the Two-genome plot menu.

For the detail format of input data, check the Input data format submenu of the Help menu.

shinyChromosome is deployed at http://150.109.59.144:3838/shinyChromosome/, http://shinyChromosome.ncpgr.cn, and https://yimingyu.shinyapps.io/shinyChromosome for online use. The source code and manual of shinyChromosome are freely available at https://github.com/venyao/shinyChromosome.

https://yimingyu.shinyapps.io/shinychromosome/

https://www.sciencedirect.com/science/article/pii/S1672022919301883

Address of the bookmark: https://yimingyu.shinyapps.io/shinychromosome/

Annotation

https://bigd.big.ac.cn/ncov/variation/annotation

Genome wharehouse 

https://bigd.big.ac.cn/gwh/browse/index

Released Genome

https://bigd.big.ac.cn/ncov/release_genome

Download data 

ftp://download.big.ac.cn/Genome/Viruses/Coronaviridae/

Raw data

https://bigd.big.ac.cn/gsa/browse/run/?tag=Coronaviridae

Address of the bookmark: https://bigd.big.ac.cn/ncov/about

http://docpollard.org/

Tools

http://docpollard.org/resources/software/

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD