BOL: Related items

GenomeTools: The versatile open source genome analysis software

Jit — Wed, 07 Feb 2018 10:44:18 -0600

The GenomeTools genome analysis system is a free collection of bioinformatics tools (in the realm of genome informatics) combined into a single binary named gt. It is based on a C library named “libgenometools” which consists of several modules.

If you are interested in gene prediction, have a look at GenomeThreader.

Address of the bookmark: http://genometools.org/

AlignGraph: algorithm for secondary de novo genome assembly guided by closely related references

Manisha Mishra — Tue, 17 Apr 2018 16:21:20 -0500

AlignGraph is a software that extends and joins contigs or scaffolds by reassembling them with help provided by a reference genome of a closely related organism.

Using AlignGraph

AlignGraph --read1 reads_1.fa --read2 reads_2.fa --contig contigs.fa --genome genome.fa --distanceLow distanceLow --distanceHigh distancehigh --extendedContig extendedContigs.fa --remainingContig remainingContigs.fa [--kMer k --insertVariation insertVariation --coverage coverage --part p --fastMap --ratioCheck --iterativeMap --misassemblyRemoval --resume]

Address of the bookmark: https://github.com/baoe/AlignGraph

CrossMap: a program for convenient conversion of genome coordinates

Jit — Thu, 31 May 2018 06:00:47 -0500

CrossMap is a program for convenient conversion of genome coordinates (or annotation files) between different assemblies (such as Human hg18 (NCBI36) <> hg19 (GRCh37), Mouse mm9 (MGSCv37) <> mm10 (GRCm38)). It supports most commonly used file formats including SAM/BAM, Wiggle/BigWig, BED, GFF/GTF, VCF. CrossMap is designed to liftover genome coordinates between assemblies. It’s not a program for aligning sequences to reference genome. We do not recommend using CrossMap to convert genome coordinates between species.

Address of the bookmark: http://crossmap.sourceforge.net

assemblytics: delta file to analyze alignments of an assembly to another assembly or a reference genome

Jit — Thu, 14 Jun 2018 07:31:00 -0500

Download and install MUMmer Align your assembly to a reference genome using nucmer (from MUMmer package) $ nucmer -maxmatch -l 100 -c 500 REFERENCE.fa ASSEMBLY.fa -prefix OUT Consult the MUMmer manual if you encounter problems Optional: Gzip the delta file to speed up upload (usually 2-4X faster) $ gzip OUT.delta Then use the OUT.delta.gz file for upload. Upload the .delta or delta.gz file (view example) to Assemblytics Important: Use only contigs rather than scaffolds from the assembly. This will prevent false positives when the number of Ns in the scaffolded sequence does not match perfectly to the distance in the reference. The unique sequence length required represents an anchor for determining if a sequence is unique enough to safely call variants from, which is an alternative to the mapping quality filter for read alignment. http://assemblytics.com/

Address of the bookmark: http://assemblytics.com/

LINKS scaffolder bloomfilter setting !

Jit — Fri, 15 Jun 2018 10:39:54 -0500

➜ bin git:(master) ✗ ls -l
total 68
drwxrwxr-x 3 urbe urbe 4096 Jun 15 12:15 lib
-rwxrwxrwx 1 urbe urbe 65141 Jun 15 17:13 LINKS
➜ bin git:(master) ✗ pwd
/home/urbe/Tools/LINKS_1.8.6/bin

➜ bloomfilter git:(master) ✗ swig -Wall -c++ -perl5 BloomFilter.i
➜ bloomfilter git:(master) ✗ g++ -c BloomFilter_wrap.cxx -I/home/urbe/anaconda3/lib/perl5/5.22.0/x86_64-linux-thread-multi/CORE/ -fPIC -Dbool=char -O3
BloomFilter_wrap.cxx:1892:30: fatal error: ../BloomFilter.hpp: No such file or directory
compilation terminated.
➜ bloomfilter git:(master) ✗ cd swig
➜ swig git:(master) ✗ g++ -c BloomFilter_wrap.cxx -I/home/urbe/anaconda3/lib/perl5/5.22.0/x86_64-linux-thread-multi/CORE/ -fPIC -Dbool=char -O3
In file included from BloomFilter_wrap.cxx:1877:0:
../BloomFilter.hpp: In member function ‘void BloomFilter::loadHeader(FILE*)’:
../BloomFilter.hpp:141:59: warning: ignoring return value of ‘size_t fread(void*, size_t, size_t, FILE*)’, declared with attribute warn_unused_result [-Wunused-result]
fread(&header, sizeof(struct FileHeader), 1, file);
^
➜ swig git:(master) ✗ g++ -Wall -shared BloomFilter_wrap.o -o BloomFilter.so -O3
➜ swig git:(master) ✗ cd ..
➜ bloomfilter git:(master) ✗ cd ..
➜ lib git:(master) ✗ cd ..
➜ bin git:(master) ✗ ./LINKS
Usage: ./LINKS [v1.8.6]
-f sequences to scaffold (Multi-FASTA format, required)
-s file-of-filenames, full path to long sequence reads or MPET pairs [see below] (Multi-FASTA/fastq format, required)
-m MPET reads (default -m 1 = yes, default = no, optional)
! DO NOT SET IF NOT USING MPET. WHEN SET, LINKS WILL EXPECT A SPECIAL FORMAT UNDER -s
! Paired MPET reads in their original outward orientation <- -> must be separated by ":"
>template_name
ACGACACTATGCATAAGCAGACGAGCAGCGACGCAGCACG:ATATATAGCGCACGACGCAGCACAGCAGCAGACGAC
-d distance between k-mer pairs (ie. target distances to re-scaffold on. default -d 4000, optional)
Multiple distances are separated by comma. eg. -d 500,1000,2000,3000
-k k-mer value (default -k 15, optional)
-t step of sliding window when extracting k-mer pairs from long reads (default -t 2, optional)
Multiple steps are separated by comma. eg. -t 10,5
-o offset position for extracting k-mer pairs (default -o 0, optional)
-e error (%) allowed on -d distance e.g. -e 0.1 == distance +/- 10% (default -e 0.1, optional)
-l minimum number of links (k-mer pairs) to compute scaffold (default -l 5, optional)
-a maximum link ratio between two best contig pairs (default -a 0.3, optional)
*higher values lead to least accurate scaffolding*
-z minimum contig length to consider for scaffolding (default -z 500, optional)
-b base name for your output files (optional)
-r Bloom filter input file for sequences supplied in -s (optional, if none provided will output to .bloom)
NOTE: BLOOM FILTER MUST BE DERIVED FROM THE SAME FILE SUPPLIED IN -f WITH SAME -k VALUE
IF YOU DO NOT SUPPLY A BLOOM FILTER, ONE WILL BE CREATED (.bloom)
-p Bloom filter false positive rate (default -p 0.001, optional; increase to prevent memory allocation errors)
-x Turn off Bloom filter functionality (-x 1 = yes, default = no, optional)
-v Runs in verbose mode (-v 1 = yes, default = no, optional)

Error: Missing mandatory options -f and -s.

ERROR fixed

perl: symbol lookup error: /home/urbe/Tools/LINKS_new/bin/./lib/bloomfilter/swig/BloomFilter.so: undefined symbol: Perl_Gthr_key_ptr

Converting a VCF into a FASTA given some reference !

Jit — Fri, 20 Jul 2018 10:03:53 -0500

Samtools/BCFtools (Heng Li) provides a Perl script vcfutils.pl which does this, the function vcf2fq (lines 469-528)

This script has been modified by others to convert InDels as well, e.g. this by David Eccles

./vcf2fq.pl -f <input.fasta> <all-site.vcf> > <output.fastq>

https://github.com/gringer/bioinfscripts/blob/master/vcf2fq.pl

https://github.com/lh3/samtools/blob/master/bcftools/vcfutils.pl

LR_Gapcloser: a tiling path-based gap closer that uses long reads to complete genome assembly

Rahul Nayak — Thu, 14 May 2020 15:09:52 -0500

LR_Gapcloser is a gap closing tool using long reads from studied species. The long reads could be downloaed from public read archive database (for instance, NCBI SRA database ) or be your own data. Then they are fragmented and aligned to scaffolds using BWA mem algorithm in BWA package. In the package, we provided a compiled bwa, so the user needn't to install bwa. LR_Gapcloser uses the alignments to find the bridging that cross the gap, and then fills the long read original sequence into the genomic gaps.

Address of the bookmark: https://github.com/CAFS-bioinformatics/LR_Gapcloser

Long read assembly workshop !

Rahul Nayak — Thu, 04 Oct 2018 17:23:18 -0500

This is a tutorial for a workshop on long-read (PacBio) genome assembly.

It demonstrates how to use long PacBio sequencing reads to assemble a bacterial genome, and includes additional steps for circularising, trimming, finding plasmids, and correcting the assembly with short-read Illumina data.

Please comment if you know any other long read addembly tutorial.

Address of the bookmark: http://sepsis-omics.github.io/tutorials/modules/cmdline_assembly_v2/

swgis v2.0 : a seqword genomic island sniffer

Abhimanyu Singh — Thu, 01 Nov 2018 12:35:52 -0500

swgis v2.0 is the modified version of the seqword genomic island sniffer. this version is specifically optimized for predicting genomic islands in eukaryotic genomes. swgis v2.0 was tested on several eukaryotic species of different lineages. all identified genomic islands were deposited in the eugi database.

download swgis v2.0

Address of the bookmark: http://eugi.bi.up.ac.za/eugi_download_swgis.php

SKESA: strategic k-mer extension for scrupulous assemblies

Jit — Wed, 14 Nov 2018 04:45:41 -0600

SKESA is a DeBruijn graph-based de-novo assembler designed for assembling reads of microbial genomes sequenced using Illumina. Comparison with SPAdes and MegaHit shows that SKESA produces assemblies that have high sequence quality and contiguity, handles low-level contamination in reads, is fast, and produces an identical assembly for the same input when assembled multiple times with the same or different compute resources.

Source code for SKESA is freely available at https://github.com/ncbi/SKESA/releases.

Research Paper @ Link

SKESA algorithm are as follows:

Address of the bookmark: https://github.com/ncbi/SKESA/releases