BOL: Related items

LRCstats: Long Read Correction Statistics

Jit — Fri, 05 Jan 2018 04:04:20 -0600

LRCstats is an open-source pipeline for benchmarking DNA long read correction algorithms for long reads outputted by third generation sequencing technology such as machines produced by Pacific Biosciences. The reads produced by third generation sequencing technology, as the name suggests, are longer in length than reads produced by next generation sequencing technologies, such as those produced by Illumina. However, long reads are plagued by high error rates, which can cause issues in downstream analysis. Long read correction algorithms reduce the error rate of long reads either through self-correcting methods or using accurate, short reads outputted by next generation sequencing technologies to correct long reads.

Of course, some long read correction algorithms are better than others, and developers of long read correction algorithms will wish to compare their algorithm with others currently available. LRCstats benchmarks long read correction algorithms using long reads produced by simulators (such as SimLoRD or PBSim) where the two-way alignments between the uncorrected long reads (uLR) and the corresponding sequences in the reference genome (Ref) are given in some sort of alignment file and then aligning the corrected long reads (cLR) to the Ref-uLR two-way alignments to create three-way alignments using a dynamic programming algorithm. Statistics on these three-way alignments are then collected, such as the overall error rates of the corrected long reads.

https://www.healthcare.uiowa.edu/labs/au/LSC/

Address of the bookmark: https://github.com/cchauve/lrcstats

QuorUM: An Error Corrector for Illumina Reads

Jit — Wed, 08 Nov 2017 11:40:41 -0600

Illumina Sequencing data can provide high coverage of a genome by relatively short (most often 100 bp to 150 bp) reads at a low cost. Even with low (advertised 1%) error rate, 100 × coverage Illumina data on average has an error in some read at every base in the genome. These errors make handling the data more complicated because they result in a large number of low-count erroneous k-mers in the reads. However, there is enough information in the reads to correct most of the sequencing errors, thus making subsequent use of the data (e.g. for mapping or assembly) easier. Here we use the term “error correction” to denote the reduction in errors due to both changes in individual bases and trimming of unusable sequence. We developed an error correction software called QuorUM. QuorUM is mainly aimed at error correcting Illumina reads for subsequent assembly. It is designed around the novel idea of minimizing the number of distinct erroneous k-mers in the output reads and preserving the most true k-mers, and we introduce a composite statistic π that measures how successful we are at achieving this dual goal. We evaluate the performance of QuorUM by correcting actual Illumina reads from genomes for which a reference assembly is available.

QuorUM is distributed as an independent software package and as a module of the MaSuRCA assembly software. Both are available under the GPL open source license at http://www.genome.umd.edu.

Address of the bookmark: http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0130821

getopts.pl file

Jit — Fri, 15 Jun 2018 04:43:03 -0500

SSPACE_longread complain for getopts.pl file.

To resolve this, download and have in SSPACED-Longreads folder.

Cheers :)

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads

Jit — Wed, 07 Jun 2017 04:18:16 -0500

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads http://www.nature.com/ncomms/2016/160415/ncomms11307/full/ncomms11307.html

Features

    Mapping position agnostic to alignment parameters.
    Consistently very high sensitivity and precision across different error profiles, rates and sequencing technologies even with default parameters.
    Circular genome handling to resolve coverage drops near ends of the genome.
    E-value.
    Meaningful mapping quality.
    Various alignment strategies (semiglobal bit-vector and Gotoh, anchored).
    Overlapping of reads for de novo assembly.
    Transcriptome mapping through internal construction of a transcriptome from a given genomic reference and a GTF file.
    ...and much more.

GraphMap is also used as an overlapper in a new de novo genome assembly project called Ra (https://github.com/mariokostelac/ra-integrate).
Ra attempts to create de novo assemblies from raw nanopore and PacBio reads without requiring error correction, for which a highly sensitive overlapper is required.

Currently, development of a new spliced-alignment mode for mapping RNA-seq reads is under way.
Description of the current effort as well as how to reach the experimental implementation can be found here: doc/rnaseq.md.

Address of the bookmark: https://github.com/isovic/graphmap

minialign: fast and accurate alignment tool for PacBio and Nanopore long reads

Jit — Thu, 24 May 2018 08:33:26 -0500

Minialign is a little bit fast and moderately accurate nucleotide sequence alignment tool designed for PacBio and Nanopore long reads. It is built on three key algorithms, minimizer-based index of the minimap overlapper, array-based seed chaining, and SIMD-parallel Smith-Waterman-Gotoh extension.

Address of the bookmark: https://github.com/ocxtal/minialign

LR_Gapcloser: a tiling path-based gap closer that uses long reads to complete genome assembly

Rahul Nayak — Thu, 14 May 2020 15:09:52 -0500

LR_Gapcloser is a gap closing tool using long reads from studied species. The long reads could be downloaed from public read archive database (for instance, NCBI SRA database ) or be your own data. Then they are fragmented and aligned to scaffolds using BWA mem algorithm in BWA package. In the package, we provided a compiled bwa, so the user needn't to install bwa. LR_Gapcloser uses the alignments to find the bridging that cross the gap, and then fills the long read original sequence into the genomic gaps.

Address of the bookmark: https://github.com/CAFS-bioinformatics/LR_Gapcloser

BASE: a practical de novo assembler for large genomes using long NGS reads

Rahul Nayak — Fri, 19 Oct 2018 07:25:21 -0500

new de novo assembler called BASE. It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs.

Address of the bookmark: https://github.com/dhlbh/BASE

Evaluation of genome assembly software based on long reads

BioStar — Fri, 01 Feb 2019 11:55:54 -0600

TGS technologies have been used to produce highly accurate de novo assemblies of hundreds of microbial genomes and highly contiguous reconstructions of many dozens of plant and animal genomes, enabling new insights into evolution and sequence diversity. They have also been applied to resequencing analyses, to create detailed maps of structural variations in many species. Also, these new technologies have been used to fill in many of the gaps in the human reference genome.

In this report, we compare and evaluate several genome assembly software based on TSG technology. The experimentation has been performed on 4 reference genomes and the results evaluated with the QUAST software. The 11 software that have been evaluated are: Celera Assembler , Falcon , Miniasm, Newbler , SGA Assembler, Smartdenovo, Abruijn, Ra, DBG2OLC, Spades and Cerulean. The first 8 software use only long reads, while the 3 last software can merge long and short reads

HASLR: a tool for rapid genome assembly of long sequencing reads

LEGE — Fri, 31 Jan 2020 05:50:15 -0600

HASLR is a tool for rapid genome assembly of long sequencing reads. HASLR is a hybrid tool which means it requires long reads generated by Third Generation Sequencing technologies (such as PacBio or Oxford Nanopore) together with Next Generation Sequencing reads (such as Illumina) from the same sample.

Address of the bookmark: https://github.com/vpc-ccg/haslr

Software and Tools to detect structure variation with long reads !!

Archana Malhotra — Wed, 15 Mar 2017 14:31:09 -0500

Uncovering the connection between genetics and heritable diseases requires an approach that looks at all the variant bases and types in a genome. While a PacBio de novo assembly resolves the most novel SV variants. 8-10X PacBio coverage of single genomes or trios reveals triple the SVs detectable by short-read data.

With Single Molecule, Real-Time (SMRT) Sequencing, you can access structural variations having a broad range of sizes, types, and GC content with the ability to:

Uncover missing heritability linked to structural variation
Unambiguously identify genomic context and variant breakpoints at the sequence level to unravel the genetic etiology of disease
Resolve structural variation across the complete size spectrum with basepair resolution

Following are the SV tools, which can assist you to achieve your goal.

Sniffles: Structural variation caller using third generation sequencing

Sniffles is a structural variation caller using third generation sequencing (PacBio or Oxford Nanopore). It detects all types of SVs using evidence from split-read alignments, high-mismatch regions, and coverage analysis. Please note the current version of Sniffles requires sorted output from BWA-MEM (use -M and -x parameter) or NGM-LR with the optional SAM attributes enabled!

More at https://github.com/fritzsedlazeck/Sniffles

MultiBreak-SV: It identifies structural variants from next-generation paired end data, third-generation long read data, or data from a combination of sequencing platforms.

There are two pieces of software in this release: (1) a pre-processor that takes machineformat (.m5) BLASR files, and (2) MultiBreak-SV. For installation and usage instructions, see doc/MultiBreakSV-Manual.txt.

More at https://github.com/raphael-group/multibreak-sv

Parliament: A Structural Variation Tool. Why ask a single sv-detection approach to find every variant when you can have a parliament of tools deciding?

Publication about the algorithm and “…the first long-read characterization of structural variation in a diploid human personal genome…” (HS1011) - “Assessing structural variation in a personal genome—towards a human reference diploid genome”

More at https://sourceforge.net/projects/parliamentsv/

https://www.dnanexus.com/papers/Parliament_Info_Sheet.pdf

PBHoney: the structural variation discovery tool

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Read The Paper http://www.biomedcentral.com/1471-2105/15/180/abstract

More at https://sourceforge.net/projects/pb-jelly/

SMRT-SV: Structural variant and indel caller for PacBio reads

Structural variant (SV) and indel caller for PacBio reads based on methods from Chaisson et al. 2014.

SMRT-SV provides an official software package for tools described in Chaisson et al. 2014 and adds several key features including the following.

Unified variant calling user interface with built-in cluster compute support
Small indel calling (2-49 bp)
Improved inversion calling (screenInversions)
Quality metric for SV calls based on number of local assemblies supporting each call
Higher sensitivity for SV calls using tiled local assemblies across the entire genome instead of "signature" regions
Genotyping of SVs with Illumina paired-end reads from WGS samples

More at https://github.com/EichlerLab/pacbio_variant_caller