BOL: Related items

VariantBam: Filtering and profiling of next-generational sequencing data using region-specific rules

Rahul Nayak — Thu, 04 Oct 2018 16:30:44 -0500

VariantBam is a tool to extract/count specific sets of sequencing reads from next-generational sequencing files. To save money, disk space and I/O, one may not want to store an entire BAM on disk. In many cases, it would be more efficient to store only those read-pairs or reads who intersect some region around the variant locations. Alternatively, if your scientific question is focused on only one aspect of the data (e.g. breakpoints), many reads can be removed without losing the information relevant to the problem.

Address of the bookmark: https://github.com/broadinstitute/VariantBam

EXCAVATOR: detecting copy number variants from whole-exome sequencing data

Radha Agarkar — Fri, 04 Jan 2019 10:10:48 -0600

EXCAVATOR, for the detection of copy number variants (CNVs) from whole-exome sequencing data. EXCAVATOR combines a three-step normalization procedure with a novel heterogeneous hidden Markov model algorithm and a calling method that classifies genomic regions into five copy number states. We validate EXCAVATOR on three datasets and compare the results with three other methods. These analyses show that EXCAVATOR outperforms the other methods and is therefore a valuable tool for the investigation of CNVs in largescale projects, as well as in clinical research and diagnostics. EXCAVATOR is freely available at http://sourceforge.net/projects/excavatortool/.

EXCAVATOR is a novel software package for the detection of copy number variants (CNVs) from whole-exome sequencing data.
EXCAVATOR has been published on Genome Biology (http://genomebiology.com/2013/14/10/R120/abstract).

Address of the bookmark: https://sourceforge.net/projects/excavatortool/

Parliament2: Runs a combination of tools to generate structural variant calls on whole-genome sequencing data

Jit — Thu, 28 May 2020 21:57:03 -0500

Parliament2 identifies structural variants in a given sample relative to a reference genome. These structural variants cover large deletion events that are called as Deletions of a region, Insertions of a sequence into a region, Duplications of a region, Inversions of a region, or Translocations between two regions in the genome.

Parliament2 runs a combination of tools to generate structural variant calls on whole-genome sequencing data. It can run the following callers: Breakdancer, Breakseq2, CNVnator, Delly2, Manta, and Lumpy. Because of synergies in how the programs use computational resources, these are all run in parallel. Parliament2 will produce the outputs of each of the tools for subsequent investigation.

Address of the bookmark: https://github.com/dnanexus/parliament2

Ktrim: an extra-fast and accurate adapter- and quality-trimmer for sequencing data

Jit — Thu, 11 Feb 2021 21:39:05 -0600

Ktrim is written in C++ for GNU Linux/Unix platforms. After uncompressing the source package, you can find an executable file ktrim under bin/ directory compiled using g++ v4.8.5 and linked with libz v1.2.7 for Linux x86_64 system. If you could not run it (which is usually caused by low version of libc++ or libz library) or you want to build a version optimized for your system, you can re-compile the programs:

user@linux$ make clean && make

Address of the bookmark: https://github.com/hellosunking/Ktrim

gSearch: a fast and flexible general search tool for whole-genome sequencing

Jit — Mon, 06 Aug 2018 17:19:15 -0500

gSearch compares sequence variants in the Genome Variation Format (GVF) or Variant Call Format (VCF) with a pre-compiled annotation or with variants in other genomes. Its search algorithms are subsequently optimized and implemented in a multi-threaded manner.

Address of the bookmark: http://ml.ssu.ac.kr/gSearch/index.html

Bactopia: a Flexible Pipeline for Complete Analysis of Bacterial Genomes

Abhi — Wed, 15 May 2024 14:36:12 -0500

Bactopia is a flexible pipeline for complete analysis of bacterial genomes. The goal of Bactopia is to process your data with a broad set of tools, so that you can get to the fun part of analyses quicker!

Bactopia can be split into two main parts: Bactopia Analysis Pipeline, and Bactopia Tools.

Bactopia Analysis Pipeline is the main per-isolate workflow in Bactopia. Built with Nextflow, input FASTQs (local or available from SRA/ENA) are put through numerous analyses including: quality control, assembly, annotation, minmer sketch queries, sequence typing, and more.

Bactopia Tools are a set a independent workflows fo

Address of the bookmark: https://github.com/bactopia/bactopia

IONiseR: tools for the quality assessment of data produced by Oxford Nanopore’s MinION sequencer

Jit — Thu, 23 Nov 2017 10:24:19 -0600

This package is intended to provide tools for the quality assessment of data produced by Oxford Nanopore’s MinION sequencer. It includes a functions to generate a number plots for examining the statistics that we think will be useful for this task.

However, nanopore sequencing is an emerging and rapidly developing technology. It is not clear what will be most informative. We hope that IONiseR will provide a framework for visualisation of metrics that we haven’t thought of, and welcome feedback at mike.smith@embl.de.

If you’re not interested in the quality assement of the raw or event level data, and want to jump straight to the getting FASTQ format files from fast5 files you can go straight to the final section of this document.

Address of the bookmark: https://www.bioconductor.org/packages/devel/bioc/vignettes/IONiseR/inst/doc/IONiseR.html

NGMLR: long-read mapper designed to align PacBio or Oxford Nanopore

Jit — Wed, 25 Apr 2018 07:30:54 -0500

CoNvex Gap-cost alignMents for Long Reads (ngmlr) is a long-read mapper designed to sensitively align PacBilo or Oxford Nanopore to (large) reference genomes. It was designed to quickly and correctly align the reads, including those spanning (complex) structural variations. Ngmlr uses an SV aware k-mer search to find approximate mapping locations for a read and then a banded Smith-Waterman alignment algorithm to compute the final alignment. Ngmlr uses a convex gap cost model that penalizes gap extensions for longer gaps less than for shorter ones to compute precise alignments. The gap model allows ngmlr to account for both the sequencing error and real genomic variations at the same time and makes it especially effective at more precisely identifying the position of breakpoints stemming from structural variations. The k-mer search helps to detect and split reads that cannot be aligned linearly, enabling ngmlr to reliably align reads to a wide range of different structural variations including nested SVs (e.g. inversions flanked by deletions).

Address of the bookmark: https://github.com/philres/ngmlr

Porechop: tool for finding and removing adapters from Oxford Nanopore reads

Rahul Nayak — Tue, 29 May 2018 07:33:44 -0500

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

Address of the bookmark: https://github.com/rrwick/Porechop

Basic Structure of Snakemake Pipeline Run !

Abhi — Thu, 14 Oct 2021 07:01:38 -0500

/user/snakemake-demo$ ls

config.json data envs scripts slurm-240702.out Snakefile

data = mock data for the snakefile to use
Snakefile = name of the snakemake “formula” file
- Note: The default file that snakemake looks for in the current working directory is the Snakefile. If you would like to override that you can specify it following the -s
  - snakemake -s snakefile.py
envs = directory for storing the conda environments that the workflow will use.
scripts = directory for storing python scripts called by the snakemake formula.
config.json = json format file with extra parameters for our snakemake file to use.
cluster.json = json format file with specification for running on the HPC
samples.txt = file we will use later relating to the config.json file.

Run the snakemake file as a dry run (the example workflow shown above).

This will build a DAG of the jobs to be run without actually executing them.
snakemake --dry-run

User can execute rules of interest.

snakemake --dry-run all VS. snakemake --dry-run call VS. snakemake --dry-run bwa

Run the snakemake file in order to produce an image of the DAG of jobs to be run.

snakemake --dag | dot -Tsvg > dag.svg OR snakemake --dag | dot -Tsvg > dag.svg

Run the snakemake (this time not as a dry run)

snakemake --use-conda