BOL: Related items

TAREAN: A computational tool for identification and characterization of satellite DNA from unassembled short reads

Surabhi Chaudhary — Tue, 15 May 2018 02:53:11 -0500

TAndem REpeat ANalyzer -TAREAN – is a computational pipeline for unsupervised identification of satellite repeats from unassembled sequence reads. The pipeline uses low-pass whole genome sequence reads and performs their graph-based clustering. Resulting clusters, representing all types of repeats, are then examined for the presence of circular structures and putative satellite repeats are reported.

How to use TAREAN:

Install a local instance of the pipeline using its source code available from bitbucket repository.
Use public Galaxy-based server at https://repeatexplorer-elixir.cerit-sc.cz/. The server is provided in frame of the Elixir CZ project and is maintained by CESNET and CERIT-SC. Simple registration is required to use this service.

Development of TAREAN was supported by ELIXIR CZ research infrastructure project (MEYS Grant No: LM2015047).

References

Novak, P., Avila Robledillo, L., Koblizkova, A., Vrbova, I., Neumann, P., Macas, J. (2017) – TAREAN: a computational tool for identification and characterization of satellite DNA from unassembled short reads. Nucleic Acids Res., doi:10.1093/nar/gkx257

Address of the bookmark: https://bitbucket.org/petrnovak/repex_tarean

BlasR Mapping single molecule sequencing reads using Basic Local Alignment with Successive Refinement (BLASR): Theory and Application,

Jit — Wed, 23 May 2018 06:54:32 -0500

BLASR (Basic Local Alignment with Successive Refinement) for mapping Single Molecule Sequencing (SMS) reads that are thousands to tens of thousands of bases long with divergence between the read and genome dominated by insertion and deletion error.

Here is how I use the blasr to align PacBio reads to the contigs (target.fasta). The “target.fasta.sa” is the suffix array from “target.fasta” generated by sawriter.

blasr query.fa ./target.fasta -sa ./target.fasta.sa -bestn 40 -maxScore -500 -m 4 -nproc 24 -out target.m4 -maxLCPLength 15

the output format option “-m 4″ generate the alignment coordinate. Not fully documented, but I can explain that to you.

I use a 24 cores / 48G ram server for the alignment. It took about 2 to 3 hours aligning 3G PacBio Reads to 10^6 sequences of short read contigs with a mean 3.5kbp length.

Address of the bookmark: http://bix.ucsd.edu/projects/blasr/

npScarf: real-time scaffolder using SPAdes contigs and Nanopore sequencing reads

Shruti Paniwala — Mon, 11 Jun 2018 05:14:57 -0500

npScarf (jsa.np.npscarf) is a program that connect contigs from a draft genomes to generate sequences that are closer to finish. These pipelines can run on a single laptop for microbial datasets. In real-time mode, it can be integrated with simple structural analyses such as gene ordering, plasmid forming.

Address of the bookmark: http://japsa.readthedocs.io/en/latest/tools/jsa.np.npscarf.html

SimLoRD: A read simulator for third generation sequencing reads

Aaryan Lokwani — Wed, 22 Aug 2018 10:40:27 -0500

SimLoRD is a read simulator for third generation sequencing reads and is currently focused on the Pacific Biosciences SMRT error model.

Reads are simulated from both strands of a provided or randomly generated reference sequence.

The reference can be read from a FASTA file or randomly generated with a given GC content. It can consist of several chromosomes, whose structure is respected when drawing reads. (Simulation of genome rearrangements may be incorporated at a later stage.)
The read lengths can be determined in four ways: drawing from a log-normal distribution (typical for genomic DNA), sampling from an existing FASTQ file (typical for RNA), sampling from a a text file with integers (RNA), or using a fixed length
Quality values and number of passes depend on fragment length.
Provided subread error probabilities are modified according to number of passes
Outputs reads in FASTQ format and alignments in SAM format

Address of the bookmark: https://bitbucket.org/genomeinformatics/simlord/

Deepbinner: a signal-level demultiplexer for Oxford Nanopore reads

Neel — Tue, 27 Nov 2018 03:38:49 -0600

Deepbinner is a tool for demultiplexing barcoded Oxford Nanopore sequencing reads. It does this with a deep convolutional neural network classifier, using many of the architectural advances that have proven successful in image classification. Unlike other demultiplexers (e.g. Albacore and Porechop), Deepbinner identifies barcodes from the raw signal (a.k.a. squiggle) which gives it greater sensitivity and fewer unclassified reads.

Reasons to use Deepbinner:
- To minimise the number of unclassified reads (use Deepbinner by itself).
- To minimise the number of misclassified reads (use Deepbinner in conjunction with Albacore demultiplexing).
- You plan on running signal-level downstream analyses, like Nanopolish. Deepbinner can demultiplex the fast5 fileswhich makes this easier.
Reasons to not use Deepbinner:
- You only have basecalled reads not the raw fast5 files (which Deepbinner requires).
- You have a small/slow computer. Deepbinner is more computationally intensive than Porechop.
- You used a sequencing/barcoding kit other than the ones Deepbinner was trained on.

Address of the bookmark: https://github.com/rrwick/Deepbinner

FastGT: an alignment-free method for calling common SNVs directly from raw sequencing reads

Jit — Tue, 28 Jan 2020 03:27:33 -0600

FastGT is a program package for whole-genome genotyping of genome variants directly from raw sequencing reads. It is written in C and runs in Linux. FastGT uses a list of variant-specific k-mer pairs that are unique in human genome, counts the frequency of k-mers in sequencing data and predicts the genotype. All this takes less than 1 hour on average low-cost Linux server.

http://bioinfo.ut.ee/FastGT/

https://github.com/bioinfo-ut/GenomeTester4/

Address of the bookmark: http://bioinfo.ut.ee/FastGT/

KAD: Assessing genome assemblies using K-mer copies in assemblies and K-mer abundance in Illumina reads

Jit — Fri, 19 Jun 2020 07:34:12 -0500

KAD is designed for evaluating the accuracy of nucleotide base quality of genome assemblies. Briefly, abundance of k-mers are quantified for both sequencing reads and assembly sequences. Comparison of the two values results in a single value per k-mer, K-mer Abundance Difference (KAD), which indicates how well the assembly matches read data for each k-mer.

where, c is the count of a k-mer from reads, m is the mode of counts of read k-mers, and n is the copy of the k-mer in the assembly.

Address of the bookmark: https://github.com/liu3zhenlab/KAD

Hifiasm: a haplotype-resolved assembler for accurate Hifi reads

Jit — Thu, 24 Dec 2020 10:03:36 -0600

Hifiasm is a fast haplotype-resolved de novo assembler for PacBio Hifi reads. It can assemble a human genome in several hours and works with the California redwood genome, one of the most complex genomes sequenced so far. Hifiasm can produce primary/alternate assemblies of quality competitive with the best assemblers. It also introduces a new graph binning algorithm and achieves the best haplotype-resolved assembly given trio data.

Address of the bookmark: https://github.com/chhylp123/hifiasm

Understanding kmer !

BioStar — Wed, 18 Aug 2021 04:27:51 -0500

What is a k-mer anyway? A k-mer is just a sequence of k characters in a string (or nucleotides in a DNA sequence). Now, it is important to remember that to get all k-mers from a sequence you need to get the first k characters, then move just a single character for the start of the next k-mer and so on. Effectively, this will create sequences that overlap in k-1 positions.

Address of the bookmark: https://bioinfologics.github.io/post/2018/09/17/k-mer-counting-part-i-introduction/

Trimmomatic: A flexible read trimming tool for Illumina NGS data

Jit — Fri, 15 Apr 2016 05:58:53 -0500

Paired End:

java -jar trimmomatic-0.35.jar PE -phred33 input_forward.fq.gz input_reverse.fq.gz output_forward_paired.fq.gz output_forward_unpaired.fq.gz output_reverse_paired.fq.gz output_reverse_unpaired.fq.gz ILLUMINACLIP:TruSeq3-PE.fa:2:30:10 LEADING:3 TRAILING:3 SLIDINGWINDOW:4:15 MINLEN:36

This will perform the following:

Remove adapters (ILLUMINACLIP:TruSeq3-PE.fa:2:30:10)
Remove leading low quality or N bases (below quality 3) (LEADING:3)
Remove trailing low quality or N bases (below quality 3) (TRAILING:3)
Scan the read with a 4-base wide sliding window, cutting when the average quality per base drops below 15 (SLIDINGWINDOW:4:15)
Drop reads below the 36 bases long (MINLEN:36)

More at http://www.usadellab.org/cms/?page=trimmomatic

Address of the bookmark: http://www.usadellab.org/cms/?page=trimmomatic