BOL: Related items

COSINE: non-seeding method for mapping long noisy sequences

Jit — Fri, 26 Oct 2018 00:41:59 -0500

Third generation sequencing (TGS) are highly promising technologies but the long and noisy reads from TGS are difficult to align using existing algorithms. Here, we present COSINE, a conceptually new method designed specifically for aligning long reads contaminated by a high level of errors.

Address of the bookmark: https://github.com/SUwonglab/COSINE

AlignGraph2: similar genome-assisted reassembly pipeline for PacBio long reads

Rahul Nayak — Sun, 14 Mar 2021 09:42:47 -0500

AlignGraph2 is the second version of AlignGraph for PacBio long reads. It extends and refines contigs assembled from the long reads with a published genome similar to the sequencing genome.

More at https://academic.oup.com/bib/advance-article-abstract/doi/10.1093/bib/bbab022/6146772

Address of the bookmark: https://github.com/huangs001/AlignGraph2

LoRDEC: a hybrid error correction program for long, PacBio reads

Jit — Mon, 10 Apr 2017 04:16:09 -0500

LoRDEC is a program to correct sequencing errors in long reads from 3rd generation sequencing with high error rate, and is especially intended for PacBio reads. It uses a hybrid strategy, meaning that it uses two sets of reads: the reference read set, whose error rate is assumed to be small, and the PacBio read set, which is then corrected using the reference set. Typically, the reference set contains Illumina reads.

Usually, errors in PacBio reads include many insertions and deletions, and comparatively less substitutions. LoRDEC can correct errors of all these types.
After correction, a larger portion of the sequence of PacBio reads is usable for detection of region of similarity with other sequences, for aligning them to the contigs of an assembly, etc.

Why is LoRDEC different?

It is efficient and can process large read data sets, included from eukaryotic or vertebrate species, on a usual computing server, and even works on desktop/laptop computers.
It adopts a novel graph based approach: it builds a succinct De Bruijn Graph (DBG) representing the short reads, and seeks a corrective sequence for each erroneous region of a long read by traversing chosen paths in the graph.

Address of the bookmark: http://www.atgc-montpellier.fr/lordec/

PERGA: A Paired-End Read Guided De Novo Assembler for Extending Contigs Using SVM and Look Ahead Approach

Rahul Nayak — Tue, 05 Jun 2018 09:57:11 -0500

PERGA - Paired End Reads Guided Assembler PERGA is a novel sequence reads guided de novo assembly approach which adopts greedy-like prediction strategy for assembling reads to contigs and scaffolds. Instead of using single-end reads to construct contig, PERGA uses paired-end reads and different read overlap sizes from O ≥ Omax to Omin to resolve the gaps and branches. Moreover, by constructing a decision model using machine learning approach based on branch features, PERGA can determine the correct extension in 99.7% of cases. PERGA will try to extend the contigs by all feasible nucleotides and determine if these multiple extensions due to sequencing errors or repeats by using looking ahead technology, and it also try to separate the different repeats of nearby genomic regions to make the assembly result more longer and accurate. The simulated E.coli paired-end reads data are generated using GemSim (KE McElroy, F Luciani, T Thomas. Gemsim: General, Error-Model Based Simulator of Next-Generation Sequencing Data. BMC Genomics 2012, 13:74), with coverage 50x, 60x, 100x, read lengths 100-bp, and can be downloaded from https://github.com/zhuxiao/data_PERGA.

Address of the bookmark: https://github.com/hitbio/PERGA

HapSolo: An optimization approach for removing secondary haplotigs during diploid genome assembly and scaffolding.

Jit — Mon, 26 Oct 2020 21:23:36 -0500

Despite marked recent improvements in long-read sequencing technology, the assembly of diploid genomes remains a difficult task. A major obstacle is distinguishing between alternative contigs that represent highly heterozygous regions. If primary and secondary contigs are not properly identified, the primary assembly will overrepresent both the size and complexity of the genome, which complicates downstream analysis such as scaffolding.

More at https://github.com/esolares/HapSolo

Address of the bookmark: https://github.com/esolares/HapSolo

MIKE: an ultrafast, assembly-, and alignment-free approach for phylogenetic tree construction

Abhi — Mon, 08 Apr 2024 06:19:52 -0500

MIKE (MinHash-based k-mer algorithm). This algorithm is designed for the swift calculation of the Jaccard coefficient directly from raw sequencing reads and enables the construction of phylogenetic trees based on the resultant Jaccard coefficient. Simulation results highlight the superior speed of MIKE compared to existing state-of-the-art methods. We used MIKE to reconstruct a phylogenetic tree, incorporating 238 yeast, 303 Zea, 141 Ficus, 67 Oryza, and 43 Saccharum spontaneum samples. MIKE demonstrated accurate performance across varying evolutionary scales, reproductive modes, and ploidy levels, proving itself as a powerful tool for phylogenetic tree construction.

Address of the bookmark: https://github.com/Argonum-Clever2/mike

String graph based genome assembly software and tools !

Rahul Nayak — Tue, 19 Dec 2017 17:17:38 -0600

In graph theory, a string graph is an intersection graph of curves in the plane; each curve is called a "string". String graphs were first proposed by E. W. Myers in a 2005 publication. In recent Genome Research paper describing an innovative approach for assembling large genomes from NGS data caught our attention for several reasons. i) it give different "string graph" prospective of long lasting genome assembly problem ii) the paper is coauthored by Jared Simpson, the developer of ABySS assembler and Richard Durbin. iii) Simpson-Durbin algorithm is that it does not rely on de Bruijn graphs, and instead employs a different graph construction approach called ‘string graph’.

Following are the genome assembly tools based on string graph:

1.SGA (String Graph Assembler) https://github.com/jts/sga

Assembles large genomes from high coverage short read data. SGA is designed as a modular set of programs, which are used to form an assembly pipeline. SGA implements a set of assembly algorithms based on the FM-index. As the FM-index is a compressed data structure, the algorithms are very memory efficient. The SGA assembly has three distinct phases. The first phase corrects base calling errors in the reads. The second phase assembles contigs from the corrected reads. The third phase uses paired end and/or mate pair data to build scaffolds from the contigs. The output of this software is a PDF report that allows the properties of the genome and data quality to be visually explored. By providing more information to the user at the start of an assembly project, this software will help increase awareness of the factors that make a given assembly easy or difficult, assist in the selection of software and parameters and help to troubleshoot an assembly if it runs into problems.

2. SAGE: String-overlap Assembly of GEnomes https://github.com/lucian-ilie/SAGE2

SAGE, for de novo genome assembly. As opposed to most assemblers, which are de Bruijn graph based, SAGE uses the string-overlap graph. SAGE builds upon great existing work on string-overlap graph and maximum likelihood assembly, bringing an important number of new ideas, such as the efficient computation of the transitive reduction of the string overlap graph, the use of (generalized) edge multiplicity statistics for more accurate estimation of read copy counts, and the improved use of mate pairs and min-cost flow for supporting edge merging. The assemblies produced by SAGE for several short and medium-size genomes compared favourably with those of existing leading assemblers.

3. FSG: Fast String Graph

The new integrated assembler has been assessed on a standard benchmark, showing that fast string graph (FSG) is significantly faster than SGA while maintaining a moderate use of main memory, and showing practical advantages in running FSG on multiple threads. Moreover, we have studied the effect of coverage rates on the running times.

4. BASE https://github.com/dhlbh/BASE

It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs. BASE is a practically efficient tool for constructing contig, with significant improvement in quality for long NGS reads. It is relatively easy to extend BASE to include scaffolding.

5. Fermi https://github.com/lh3/fermi/

Fermi is a de novo assembler with a particular focus on assembling Illumina short sequence reads from a mammal-sized genome. In addition to the role of a typical assembler, fermi also aims to preserve heterozygotes which are often collapsed by other assemblers. Its ultimate goal is to find a minimal set of unitigs to represent all the information in raw reads.

If you want to learn about String Graph assembler, please read the following papers -

i) The Fragment Assembly String Graph - E. W. Myers

This paper describes the String Graph concept.

ii) Efficient construction of an assembly string graph using the FM-index - Jared T. Simpson and Richard Durbin

This earlier paper from Simpson and Durbin

iii) Efficient de novo assembly of large genomes using compressed data structures - Jared T. Simpson and Richard Durbin

Long read assembly workshop !

Rahul Nayak — Thu, 04 Oct 2018 17:23:18 -0500

This is a tutorial for a workshop on long-read (PacBio) genome assembly.

It demonstrates how to use long PacBio sequencing reads to assemble a bacterial genome, and includes additional steps for circularising, trimming, finding plasmids, and correcting the assembly with short-read Illumina data.

Please comment if you know any other long read addembly tutorial.

Address of the bookmark: http://sepsis-omics.github.io/tutorials/modules/cmdline_assembly_v2/

Biological databases !

BioStar — Wed, 12 Feb 2020 01:16:29 -0600

Now a days there are a lots of genomics databases available around the world. This bookmark is created to provide all links in one place ...

ftp://ftp.ncbi.nih.gov/genomes/

https://hgdownload.soe.ucsc.edu/downloads.html

Address of the bookmark: ftp://ftp.ncbi.nih.gov/genomes/

GraphUnzip: Phases an assembly graph using Hi-C data and/or long reads.

Jit — Fri, 05 Feb 2021 21:22:24 -0600

GraphUnzip, a fast, memory-efficient and accurate tool to unzip assembly graphs into their constituent haplotypes using long reads and/or Hi-C data. As GraphUnzip only connects sequences in the assembly graph that already had a potential link based on overlaps, it yields high-quality gap-less supercontigs. To demonstrate the efficiency of GraphUnzip, we tested it on a simulated diploid Escherichia coli genome, and on two real datasets for the genomes of the rotifer Adineta vaga and the potato Solanum tuberosum. In all cases, GraphUnzip yielded highly continuous phased assemblies.

https://www.biorxiv.org/content/biorxiv/early/2021/02/01/2021.01.29.428779.full.pdf

Address of the bookmark: https://github.com/nadegeguiglielmoni/GraphUnzip