BOL: Related items

Senior Scientist (Agricultural Bio-informatics) (One post)

Wed, 24 Dec 2014 05:01:02 -0600

Agricultural Scientists Recruitment Board

Qualifications Essential:
Doctoral degree in Bio-informatics/ Biotechnology/Molecular Biology and Biotechnology/Life Sciences/ Computer Sciences with specialization in Bio-informatics including relevant basic sciences with 8 years’ experience in the relevant subject as Scientist/Lecturer or in an equivalent position in the Pay Band- 3 of 15600-39100 with Grade Pay of 5400/6000/7000/8000 having made contribution to research/teachin/extension education as evidenced by published work/innovations and impact.

Doctoral degree in the above subject(s) including relevant basic sciences with minimum 8 years’ experience of high quality post-doctoral research in an institution/organization as evidenced by at least 6 publications in journals with NAAS rating of 7.5 or above.

Desirable:
(i) Specialization and experience: Knowledge of software development and its application in crop bioinformatics, experience in handling ‘omies’data.
(ii) Teaching experience in relevant subject

The Secretary, Agricultural Scientists Recruitment Board, Indian Council of Agricultural Research Krishi Anusandhan Bhavan-I, Pusa New Delhi –110 012, India

Detailed eligibility criteria with how to apply information can be had at:
http://www.indiastudychannel.com/jobs/333467-Indian-Council-of-Agricultural-Research-looking-for-Assistant-Director-General.aspx

More at http://asrb.org.in/administrator/uploads_dir/1418978057english.pdf

Magic-BLAST: a tool for mapping large next-generation RNA or DNA sequencing runs against a whole genome or transcriptome.

Jit — Tue, 26 Dec 2017 22:23:39 -0600

Magic-BLAST is a tool for mapping large next-generation RNA or DNA sequencing runs against a whole genome or transcriptome. Each alignment optimizes a composite score, taking into account simultaneously the two reads of a pair, and in case of RNA-seq, locating the candidate introns and adding up the score of all exons. This is very different from other versions of BLAST, where each exon is scored as a separate hit and read-pairing is ignored.

Magic-BLAST incorporates within the NCBI BLAST code framework ideas developed in the NCBI Magic pipeline, in particular hit extensions by local walk and jump (http://www.ncbi.nlm.nih.gov/pubmed/26109056), and recursive clipping of mismatches near the edges of the reads, which avoids accumulating artefactual mismatches near splice sites and is needed to distinguish short indels from substitutions near the edges.

Address of the bookmark: https://ncbi.github.io/magicblast/

RStudio

Jitendra Narayan — Sat, 27 Dec 2014 06:50:58 -0600

RStudio IDE is a powerful and productive user interface for R. It’s free and open source, and works great on Windows, Mac, and Linux.

The developers and expert trainers are the authors of several popular R packages, including ggplot2, plyr, lubridate, and others.

More at http://www.rstudio.com/

http://www.rstudio.com/products/RStudio/

Address of the bookmark: http://www.rstudio.com/

ALPACA: A hybrid strategy for assembly of genomic DNA shotgun sequencing reads.

Seema Singh — Mon, 30 Apr 2018 04:38:40 -0500

ALPACA requires Celera Assembler 8.3 or later. It is recommended to build Celera Assembler from source. (Why? The pre-built binaries CA_8.3rc1 and CA8.3rc2 will work for any large data set.

Detail paper at https://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-017-3927-8

Address of the bookmark: https://github.com/VicugnaPacos/ALPACA

seqloc 0.6

Gudiya Pal — Sun, 28 Dec 2014 12:51:29 -0600

The Bio.SeqLoc modules in seqloc are designed to represent positions and locations (ranges of positions) on sequences, particularly nucleotide sequences. My original motivation for writing these packages was handing the locations of genes in eukaryotic genomes.

Handle sequence locations for bioinformatics http://www.ingolia-lab.org/seqloc-tutorial.html

Address of the bookmark: http://www.stackage.org/snapshot/nightly-2014-12-28/package/seqloc-0.6

HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies

Jit — Tue, 15 May 2018 07:35:26 -0500

HapCUT2 is a maximum-likelihood-based tool for assembling haplotypes from DNA sequence reads, designed to "just work" with excellent speed and accuracy. We found that previously described haplotype assembly methods are specialized for specific read technologies or protocols, with slow or inaccurate performance on others. With this in mind, HapCUT2 is designed for speed and accuracy across diverse sequencing technologies, including but not limited to: NGS short reads (Illumina HiSeq) clone-based sequencing (Fosmid or BAC clones) SMRT reads (PacBio) Oxford Nanopore reads 10X Genomics Linked-Reads proximity-ligation (Hi-C) reads high-coverage sequencing (>40x coverage-per-SNP) using above technologies combinations of the above technologies (e.g. scaffold long reads with Hi-C reads) See below for specific examples of command line options and best practices for some of these technologies. NOTE: At this time HapCUT2 is for diploid organisms only. VCF input should contain diploid variants. If you use HapCUT2 in your research, please cite: Edge, P., Bafna, V. & Bansal, V. HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies. Genome Res. gr.213462.116 (2016). doi:10.1101/gr.213462.116

Address of the bookmark: https://github.com/vibansal/HapCUT2

Research Associate @ TATA MEMORIAL CENTRE ADVANCED CENTRE FOR TREATMENT, RESEARCH AND EDUCATION IN CANCER KHARGHAR, NAVI MUMBAI

Thu, 08 Jan 2015 20:53:57 -0600

TATA MEMORIAL CENTRE ADVANCED CENTRE FOR TREATMENT, RESEARCH AND EDUCATION IN CANCER KHARGHAR, NAVI MUMBAI – 410210

Website: www.actrec.gov.in; Ph: 27405000

No. ACTREC/Advt./ 66 /2014 23rd December, 2014
Research Associate

International Cancer Genome Consortium (ICGC) - India Project (IRB Project No. 3 A/c. No. 2408)

Dr. Rajiv Sarin

Duration of the Project: One year Extendable up to Three years.

Consolidated Salary: Rs. 42,000/- p.m.

Application last date: 8th January, 2015.

Interview Date & Time: 21st January, 2015, at 11.00 a.m.

Venue: Conference Room, 3rd floor, Khanolkar Shodhika, ACTREC.

Essential Qualifications and Experience:

Ph.D (any branch of Life Sciences)

The candidate must have at least one year experience after Ph.D., preferably in Genomics and Molecular Biology.

Candidates fulfilling these requirements should pre register themselves by sending their application in the prescribed format with recent CV and contact details of 2 referees by e-mail to icgc@actrec.gov.in latest 8th January, 2015 by 10.00 a.m.

Candidates shortlisted for the interview will be intimated by email on or before 9th January, 2015.

The interviews would be held on 21st January 2015 and will be only for the pre registered candidates who have been shortlisted.
No T.A./D.A. will be admissible for attending the interview.

At the time of Interview the candidate should bring original certificates along with CV with contact details of 2 referees and submit the photocopies (attested) of the certificates, with a recent passport size photograph.

Advertisement: www.actrec.gov.in/data%20files/2014/Walk-in-Research-Fellow-26-12-14.doc

gSearch: a fast and flexible general search tool for whole-genome sequencing

Jit — Mon, 06 Aug 2018 17:19:15 -0500

gSearch compares sequence variants in the Genome Variation Format (GVF) or Variant Call Format (VCF) with a pre-compiled annotation or with variants in other genomes. Its search algorithms are subsequently optimized and implemented in a multi-threaded manner.

Address of the bookmark: http://ml.ssu.ac.kr/gSearch/index.html

Bioinformatics Scripts

Jit — Thu, 22 Jan 2015 22:29:39 -0600

Some of the useful bioinformatics scripts.

For example ... contig-stats.pl is a Perl script that will automatically describe features of a sequence assembly.

http://milkweedgenome.org/?q=scripts

Address of the bookmark: http://milkweedgenome.org/?q=scripts

SimLoRD: A read simulator for third generation sequencing reads

Aaryan Lokwani — Wed, 22 Aug 2018 10:40:27 -0500

SimLoRD is a read simulator for third generation sequencing reads and is currently focused on the Pacific Biosciences SMRT error model.

Reads are simulated from both strands of a provided or randomly generated reference sequence.

The reference can be read from a FASTA file or randomly generated with a given GC content. It can consist of several chromosomes, whose structure is respected when drawing reads. (Simulation of genome rearrangements may be incorporated at a later stage.)
The read lengths can be determined in four ways: drawing from a log-normal distribution (typical for genomic DNA), sampling from an existing FASTQ file (typical for RNA), sampling from a a text file with integers (RNA), or using a fixed length
Quality values and number of passes depend on fragment length.
Provided subread error probabilities are modified according to number of passes
Outputs reads in FASTQ format and alignments in SAM format

Address of the bookmark: https://bitbucket.org/genomeinformatics/simlord/