BOL: Related items

Short-read assembly using Spades !

Abhimanyu Singh — Mon, 31 Jan 2022 07:18:16 -0600

If we only had Illumina reads, we could also assemble these using the tool Spades.

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

illumina_R1.fastq.gz: the Illumina forward reads
illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

-1 is input file of forward reads
-2 is input file of reverse reads
--careful minimizes mismatches and short indels
--cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
-o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

Ranbow: a haplotype assembler for polyploid genomes

Jit — Fri, 01 Jun 2018 07:21:54 -0500

Ranbow is a haplotype assembler for polyploid genomes. It has been developed for the haplotype assembly of the hexaploid sweet potato genome, which is highly heterozygous. Ranbow can also be applied to other polyploid genomes. After a first phasing, Ranbow utilizes the assembled haplotypes to improve the accuracy of variant calling results and to infer the evolutionary history of the organism´s genome. Ranbow has three main modes of function: ranbow hap: for haplotyping ranbow eval: for evaluating of the assemble haplotypes by gold standard (long) reads ranbow phylo: for the phylogenetic analysis

Address of the bookmark: https://www.molgen.mpg.de/ranbow

IQ-TREE: Efficient software for phylogenomic inference

Jit — Mon, 18 Feb 2019 04:25:11 -0600

A fast and effective stochastic algorithm to infer phylogenetic trees by maximum likelihood. IQ-TREE compares favorably to RAxML and PhyML in terms of likelihoods with similar computing time

IQ-TREE found higher likelihoods between 62.2% and 87.1% of the studied alignments, thus efficiently exploring the tree-space. If we use the IQ-TREE stopping rule, RAxML and PhyML are faster in 75.7% and 47.1% of the DNA alignments and 42.2% and 100% of the protein alignments, respectively. However, the range of obtaining higher likelihoods with IQ-TREE improves to 73.3–97.1%. IQ-TREE is freely available at http://www.cibiv.at/software/iqtree

Address of the bookmark: http://www.iqtree.org/

Smudgeplot: Inference of ploidy and heterozygosity structure using whole genome sequencing data

Neel — Fri, 25 Feb 2022 04:42:09 -0600

This tool extracts heterozygous kmer pairs from kmer count databases and performs gymnastics with them. We are able to disentangle genome structure by comparing the sum of kmer pair coverages (CovA + CovB) to their relative coverage (CovB / (CovA + CovB)). Such an approach also allows us to analyze obscure genomes with duplications, various ploidy levels, etc.

Smudgeplots are computed from raw or even better from trimmed reads and show the haplotype structure using heterozygous kmer pairs. For example:

Address of the bookmark: https://github.com/KamilSJaron/smudgeplot

homologizer: Phylogenetic phasing of gene copies into polyploid subgenomes

Abhi — Sat, 03 Jun 2023 19:19:10 -0500

This tutorial describes the usage of homologizer to phase gene copies into polyploid subgenomes. The tutorial is an abbreviated version of a soon-to-be published paper in Methods in Molecular Biology. Please see that paper for many more details and practical considerations for running homologizer analyses. If you use homologizer, please cite the paper in which we first describe the method:

Freyman, W.A., Johnson, M.G., and C.J. Rothfels. 2022. Homologizer: phylogenetic phasing of gene copies into polyploid subgenomes. bioRxiv 2020.10.22.351486v4

homologizer is implemented in RevBayes. Please see http://revbayes.com to download and install RevBayes. For users without previous RevBayes experience, we recommend the tutorials at http://revbayes.com.

Address of the bookmark: https://github.com/wf8/homologizer

Tools for Searching Repeats And Palindromic Sequences

Radha Agarkar — Sat, 21 May 2016 22:32:25 -0500

What are genomic interspersed repeats?

In the mid 1960's scientists discovered that many genomes contain stretches of highly repetitive DNA sequences ( see Reassociation Kinetics Experiments, and C-Value Paradox ). These sequences were later characterized and placed into five categories:

Simple Repeats - Duplications of simple sets of DNA bases (typically 1-5bp) such as A, CA, CGG etc.
Tandem Repeats - Typically found at the centromeres and telomeres of chromosomes these are duplications of more complex 100-200 base sequences.
Segmental Duplications - Large blocks of 10-300 kilobases which are that have been copied to another region of the genome.
Interspersed Repeats
Processed Pseudogenes, Retrotranscripts, SINES - Non-functional copies of RNA genes which have been reintegrated into the genome with the assitance of a reverse transcriptase.
DNA Transposons
Retrovirus Retrotransposons
Non-Retrovirus Retrotransposons ( LINES )

Currently up to 50% of the human genome is repetitive in nature and as improvements are made in detection methods this number is expected to increase.

On the other hand; In genetics, the term palindrome refers to a sequence of nucleotides along a DNA (deoxyribonucleic acid) or RNA (ribonucleic acid) strand that contains the same series of nitrogenous bases regardless from which direction the strand is analyzed. Akin to a language palindrome—wherein a word or phrase is spelled the same left-to-right as right-to-left (e.g., the word RADAR or the phrase "able was I ere I saw elba")—with genetic palindromes it does not matter whether the nucleic acid strand is read starting from the 3' (three prime) end or the 5' (five prime) end of the strand.

Recent research on palindromes centers on understanding palindrome formation during gene amplification. Other studies have attempted to relate palindrome formation to molecular mechanisms involved in double stranded breaks and in the formation of inverted repeats. Assisted by high speed computers, other groups of scientists link palindrome formation to the conservation of genetic information.

Related to the direction of transcription by RNA polymerase, DNA strands have upstream and downstream terminus defined by differing chemical groups at each end. The ends of each strand of DNA or RNA are termed the 5' (phosphate bound to the 5' position carbon) and 3' (phosphate bound to the 3' carbon) ends to indicate a polarity within the molecule. Using the letters A, T, C, G, to represent the nitrogenous bases adenine, thymine, cytosine, and guanine found in DNA, and the letters A, U, C, G to represent the nitrogenous bases adenine, uracil, cytosine, guanine found in RNA (Note that uracil in RNA replaces the thymine found in DNA), geneticists usually represent DNA by a series of base codes (e.g., 5' AATCGGATTGCA 3'). The base codes are usually arranged from the 5' end to the 3' end.

Because of specific base pairing in DNA (i.e., adenine (A) always bonds with (thymine (T) and cytosine (C) always bonds with guanine (G)) the complimentary stand to the sequence 5' AATCGGATTGCA 3' would be 3' TTAGCCTAACGT 5'.

With palindromes the sequences on the complimentary strands read the same in either direction. For example, a sequence of 5' GAATTC3' on one strand would be complimented by a 3' CTTAAG 5' strand. In either case, when either strand is read from the 5' prime end the sequence is GAATTC. Another example of a palindrome would be the sequence 5' CGAAGC 3' that, when reversed, still reads CGAAGC.

Palindromes are important sequences within nucleic acids. Often they are the site of binding for specific enzymes (e.g., restriction endobucleases) designed to cut the DNA strands at specific locations (i.e., at palindromes).

Palindromes may arise from brakeage and chromosomal inversions that form inverted repeats that compliment each other. When a palindrome results from an inversion, it is often referred to as an inverted repeat. For example, the sequence 5' CGAAGC 3', if inverted (reversed 180°), still reads CGAAGC.

The European Molecular Biology Open Software Suite (EMBOSS) includes some basic tools for finding tandem repeats and inverted repeats (see B.6.22. Applications in group Nucleic:repeats). There are many on-line services providing the EMBOSS tools, for example:

Wageningen Bioinformatics Webportal EMBOSS explorer
Mobyle@Pasteur
Soaplab2 Web Services at Vital-IT

For more sophisticated repeat finding you will want to look at tools using Repbase for example:

Other nucleotide repeat finding methods found by a couple of web searches:

Meraculous: De Novo Genome Assembly with Short Paired-End Reads

Jit — Tue, 07 Nov 2017 04:36:10 -0600

We describe a new algorithm, meraculous, for whole genome assembly of deep paired-end short reads, and apply it to the assembly of a dataset of paired 75-bp Illumina reads derived from the 15.4 megabase genome of the haploid yeast Pichia stipitis. More than 95% of the genome is recovered, with no errors; half the assembled sequence is in contigs longer than 101 kilobases and in scaffolds longer than 269 kilobases. Incorporating fosmid ends recovers entire chromosomes. Meraculous relies on an efficient and conservative traversal of the subgraph of the k-mer (deBruijn) graph of oligonucleotides with unique high quality extensions in the dataset, avoiding an explicit error correction step as used in other short-read assemblers. A novel memory-efficient hashing scheme is introduced. The resulting contigs are ordered and oriented using paired reads separated by ∼280 bp or ∼3.2 kbp, and many gaps between contigs can be closed using paired-end placements. Practical issues with the dataset are described, and prospects for assembling larger genomes are discussed.

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3158087/

SISRS: Site Identification from Short Read Sequences

Abhimanyu Singh — Wed, 28 Nov 2018 08:56:03 -0600

Next-gen sequence data such as Illumina HiSeq reads. Data must be sorted into folders by taxon (e.g. species or genus). Paired reads in fastq format must be specified by _R1 and _R2 in the (otherwise identical) filenames. Paired and unpaired reads must have a fastq file extension.

Address of the bookmark: https://github.com/rachelss/SISRS

ReMILO: reference assisted misassembly detection algorithm using short and long reads.

Jit — Fri, 06 Jul 2018 04:27:49 -0500

ReMILO, a reference assisted misassembly detection algorithm that uses both short reads and PacBio SMRT long reads. ReMILO aligns the initial short reads to both the contigs and reference genome, and then constructs a novel data structure called red-black multipositional de Bruijn graph to detect misassemblies. In addition, ReMILO also aligns the contigs to long reads and find their differences from the long reads to detect more misassemblies.

Address of the bookmark: https://github.com/songc001/remilo

Genome assembly tutorial "Genome Assembly for short and long reads"

Jit — Sat, 19 Jan 2019 17:29:53 -0600

In this lab we will perform de novo genome assembly of a bacterial genome. You will be guided through the genome assembly starting with data quality control, through to building contigs and analysis of the results. At the end of the lab you will know:

How to perform basic quality checks on the input data
How to run a short read assembler on Illumina data
How to run a long read assembler on Pacific Biosciences or Oxford Nanopore data
How to improve the accuracy of a long read assembly using short reads
How to assess the quality of an assembly

https://bioinformaticsdotca.github.io/high-throughput_biology_2017

Address of the bookmark: https://bioinformaticsdotca.github.io/high-throughput_biology_2017_module6_lab