More at http://biorg.cis.fiu.edu/

It supports most commonly used file formats including SAM/BAM, Wiggle/BigWig, BED, GFF/GTF, VCF.

CrossMap is designed to liftover genome coordinates between assemblies. It’s not a program for aligning sequences to reference genome.

We do not recommend using CrossMap to convert genome coordinates between species.

More at http://crossmap.sourceforge.net/

Address of the bookmark: http://crossmap.sourceforge.net/

Address of the bookmark: http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0090581

http://compbio.cs.toronto.edu/prism/

Address of the bookmark: http://compbio.cs.toronto.edu/prism/

Why Normalize RNA-Seq Data?

Normalization is a crucial step in RNA-Seq analysis for the following reasons:

• Sequencing depth: Different RNA-Seq experiments produce varying numbers of reads, making direct comparisons between samples misleading.

• Gene length: Longer genes inherently generate more reads, irrespective of their actual expression level.

• Bias reduction: Normalization mitigates technical biases, enabling meaningful biological interpretation.

TPM (Transcripts Per Million)

TPM measures the proportion of reads mapped to a transcript, normalized by transcript length and sequencing depth. It is calculated as:

Key Features:

1. Proportionality: TPM values sum to 1,000,000 across all transcripts in a sample, making it easier to compare between samples.

2. Intuitive interpretation: TPM values directly represent the abundance of transcripts in a sample.

3. Preferred for comparisons: TPM facilitates between-sample comparisons better than FPKM.

FPKM (Fragments Per Kilobase Million)

FPKM normalizes read counts by transcript length and sequencing depth, but without enforcing proportionality like TPM. It is defined as:

Key Features:

1. Historical significance: FPKM was one of the first normalization methods used for RNA-Seq.

2. Single-end vs. paired-end: In paired-end sequencing, FPKM becomes RPKM (Reads Per Kilobase Million).

3. Limited utility: FPKM values are not as robust as TPM for cross-sample comparisons due to lack of proportionality.

CPM (Counts Per Million)

CPM normalizes raw read counts by sequencing depth, without considering gene length. It is expressed as:

Key Features:

1. Simplicity: CPM is straightforward and computationally less intensive.

2. Application: Suitable for non-length-dependent analyses, such as comparing total expression levels or differential expression analysis.

3. Gene length agnostic: CPM does not correct for gene length, making it less ideal for measuring expression levels.

When to Use Each Method

• TPM: Best for comparing expression levels between samples, especially when transcript length and sequencing depth vary.

• FPKM: Useful for historical consistency but generally replaced by TPM.

• CPM: Ideal for differential expression analysis when gene length normalization is unnecessary.

Conclusion

Choosing the right normalization method depends on the specific objectives of your RNA-Seq analysis. TPM’s proportionality and robustness make it the preferred choice for most applications, while CPM serves well for differential expression studies. Although FPKM paved the way for RNA-Seq normalization, it has largely been supplanted by TPM in modern workflows. Understanding these methods and their nuances ensures accurate and meaningful interpretations of RNA-Seq data.

References:

1. Li, B., & Dewey, C. N. (2011). RSEM: accurate transcript quantification from RNA-Seq data with or without a reference genome. BMC Bioinformatics.

2. Trapnell, C., et al. (2010). Transcript assembly and quantification by RNA-Seq reveals unannotated transcripts and isoform switching during cell differentiation. Nature Biotechnology.

3. Law, C. W., et al. (2014). voom: precision weights unlock linear model analysis tools for RNA-seq read counts. Genome Biology.

Address of the bookmark: https://bernatgel.github.io/karyoploter_tutorial/

GAEMR’s analysis philosophy is centered on contiguity, correctness, and completeness -- how many pieces in an assembly composed of, how well those pieces accurately represent the genome sequenced, and how much of that genome is represented by those pieces. By performing over twenty different analyses based on these principles, GAEMR gives a clear picture of the condition of a genome assembly. 

Address of the bookmark: https://www.broadinstitute.org/software/gaemr/

Address of the bookmark: http://biobits.org/samtools_primer.html

bcftools: a set of companion tools, currently bundled with SAMtools, for identifying and filtering genomics variants.

bowtie: widely used, open source alignment software for aligning raw sequence reads to a reference genome.

BAM Format: binary, compressed format for storing SAM data.

BCF Format: Binary call format. Binary, compressed format for storing VCF data.

CIGAR String: Compact Idiosyncratic Gapped Alignment Report. A compact string that (partially) summarizes the alignment of a raw sequence read to the reference genome. Three core abbreviations are used: M for alignment match; I for insertion; and D for Deletion. For example, a CIGAR string of 5M2I63M indicates that the first 5 base pairs of the read align to the reference, followed by 2 base pairs, which are unique to the read, and not in the reference genome, followed by an additional 63 base pairs of alignment.

FASTA Format: text format for storing raw sequence data. For example, the FASTA file at: http://www.ncbi.nlm.nih.gov/nuccore/NC_008253 contains entire genome for Escherichia coli 536.

FASTQ Format: text format for storing raw sequence data along with quality scores for each base; usually generated by sequencing machines.

genotype likelihood: the probability that a specific genotype is present in the sample of interest. Genotype likelihoods are usually expressed as a Phred-scaled probability, where P = 10 ^ (-Q/10). For example, if the genotype TT (both alleles are T) at position 1,299,132 in human chromosome 12 (reference G) is 37, this translates to a probability of 10^-37/10 = 0.0001995, meaning that there is very low probability that the reads in your sample support a TT genotype. On the other hand, a genotype of AA at the same position with a score of 0 translates into a probability of 10^-0 = 1, indicating extremely high probability that your sample contains a homozygous mutation of G to A.

mate-pair: in paired-end sequencing, both ends of a single DNA or RNA fragment are sequenced, but the intermediate region is not. The two ends which are sequenced form a pair, and are frequently referred to as mate-pairs.

QNAME: unique identifier of a raw sequence read (also known as the Query Name). Used in FASTQ and SAM files.

paired-end sequencing: sequencing process where both ends of a single DNA or RNA fragment are sequenced, but the intermediate region is not. Particularly useful for identifying structural rearrangements, including gene fusions.

Phred-scaled probability: a scaled value (Q) used to compactly summarize a probability, where P = 10^-Q/10. For example, a Phred Q score of 10 translates to probability (P) = 10^-10/10 = 0.1. Phred-scaled probabilities are common in next-generation sequencing, and are used to represent multiple types of quality metrics, including quality of base calls, quality of mappings, and probabilities associated with specific genotypes. The name Phred refers to the original Phred base-calling software, which first used and developed the scale.

Phred quality score: a score assigned to each base within a sequence, quantifying the probability that the base was called incorrectly. Scores use a Phred-scaled probability metric. For example, a Phred Q score of 10 translates to P=10^-10/10 = 0.1, indicating that the base has a 0.1 probability of being incorrect. Higher Phred score correspond to higher accuracy. In the FASTQ format, Phred scores are represented as single ASCII letters. For details on translating between Phred scores and ASCII values, refer to Table 1 of this useful blog post from Damian Gregory Allis.

read-length: the number of base pairs that are sequenced in an individual sequence read.

read-depth: the number of sequence reads that pile up at the same genomic location. For example, 30X read-depth coverage indicates that the genomic location is covered by 30 independent sequencing reads. Increased read-depth translates into higher confidence for calling genomic variants.

RNAME: reference genome identifier (also known as the Reference Name). Within a SAM formatted file, the RNAME identifies the reference genome where the raw read aligns.

SAM Flag: a single integer value (e.g. 16), which encodes multiple elements of meta-data regarding a read and its alignment. Elements include: whether the read is one part of a paired-end read, whether the read aligns to the genome, and whether the read aligns to the forward or reverse strand of the genome. A useful online utility decodes a single SAM flag value into plain English.

SAM Format: Text file format for storing sequence alignments against a reference genome. See also BAM Format.

SAMtools: widely used, open source command line tool for manipulating SAM/BAM files. Includes options for converting, sorting, indexing and viewing SAM/BAM files. The SAMtools distribution also includes bcftools, a set of command line tools for identifying and filtering genomics variants. Created by Heng Li, currently of the Broad Institute.

single-read sequencing: sequencing process where only one end of a DNA or RNA fragment is sequenced. Contrast with paired-end sequencing.

VCF Format: Variant call format. Text file format for storing genomic variants, including single nucleotide polymorphisms, insertions, deletions and structural rearrangements. See also BCF format.

NextGenerationSequencing
A high-throughput sequencing method which parallelizes the sequencing process, producing thousands or millions of sequences at once.

DeepSequencing
Techniques of nucleotide sequence analysis that increase the range, complexity, sensitivity, and accuracy of results by greatly increasing the scale of operations and thus the number of nucleotides, and the number of copies of each nucleotide sequenced.

Paired-EndSequencing
Sequence both ends of the same fragment and keep track of the paired data.

Adapter
Short oligonucleotides which are attached to the DNA to be sequenced. An adapter can provide a priming site for both amplification and sequencing of the adjoining, unknown nucleic acid.

Library
A collection of DNA fragments with adapters ligated to each end.

BridgeAmplification
Generation of in situ copies of a specific DNA molecule on an oligo-decorated solid support.

EmulsionPCR
A method for bead-based amplification of a library. A single adapter-bound fragment is attached to the surface of a bead, and an oil emulsion containing necessary amplification reagents is formed around the bead/fragment component. Parallel amplification of millions of beads with millions of single strand fragments produces a sequencer-ready library.

Alignment
Mapping of sequence reads to a known reference sequence

Referencesequence/genome 
A fully assembled version of a genome that can be used for mapping short DNA sequence reads for comparisons of genomes from various individuals

CoverageDepth
The number of nucleotides from reads that are mapped to a given position of reference genome.

Specificity 
The percentage of sequences that map to the intended targets out of total bases per run.

Uniformity 
The variability in sequence coverage across target regions.

Homopolymer
Uninterrupted stretch of a single nucleotide type (e.g., TTT or GGGGGG)

InDel
InDel stands for Insertion or deletion. A form of structural variation in which a DNA segment is either deleted or inserted.

SNP 

SNP stands for Single Nucleotide Polymorphism. A single base difference found when comparing the same DNA sequence from two different individuals.

Address of the bookmark: http://4dgenome.research.chop.edu/