BOL: Related items

Magic-BLAST: a tool for mapping large next-generation RNA or DNA sequencing runs against a whole genome or transcriptome.

Jit — Tue, 26 Dec 2017 22:23:39 -0600

Magic-BLAST is a tool for mapping large next-generation RNA or DNA sequencing runs against a whole genome or transcriptome. Each alignment optimizes a composite score, taking into account simultaneously the two reads of a pair, and in case of RNA-seq, locating the candidate introns and adding up the score of all exons. This is very different from other versions of BLAST, where each exon is scored as a separate hit and read-pairing is ignored.

Magic-BLAST incorporates within the NCBI BLAST code framework ideas developed in the NCBI Magic pipeline, in particular hit extensions by local walk and jump (http://www.ncbi.nlm.nih.gov/pubmed/26109056), and recursive clipping of mismatches near the edges of the reads, which avoids accumulating artefactual mismatches near splice sites and is needed to distinguish short indels from substitutions near the edges.

Address of the bookmark: https://ncbi.github.io/magicblast/

NextSV: a meta-caller for structural variants from low-coverage long-read sequencing data

Jit — Mon, 06 Aug 2018 17:24:53 -0500

NextSV, a meta SV caller and a computational pipeline to perform SV calling from low coverage long-read sequencing data. NextSV integrates three aligners and three SV callers and generates two integrated call sets (sensitive/stringent) for different analysis purpose. The output of NextSV is in ANNOVAR-compatible bed format. Users can easily perform downstream annotation using ANNOVAR and disease gene discovery using Phenolyzer.

Address of the bookmark: https://github.com/Nextomics/NextSV

sim3C: Read-pair simulation of 3C-based sequencing methodologies (HiC, Meta3C, DNase-HiC)

Jit — Tue, 13 Nov 2018 07:25:38 -0600

Required python modules

biopython
intervaltree
numpy
scipy
tqdm
PyYAML

Address of the bookmark: https://github.com/cerebis/sim3C

Prof. Dr. med. Andreas Ramming

Wed, 07 Aug 2019 03:25:48 -0500

In many autoimmune diseases, a misdirected immune response leads to chronic inflammation and subsequently to fibrotic and degenerative tissue remodeling. Therapeutic options are available for inflammatory joint diseases, but only about 40% of patients respond to these existing therapies on a permanent basis. In the remaining cases, these therapies miss their target from the beginning or later during the course of treatment failure. There are currently no causal therapies available for the treatment of fibrotic autoimmune diseases such as systemic sclerosis. Therefore, there is an urgent need to develop new therapeutic options for the treatment of fibrotic and synovitic autoimmune diseases. His group is therefore deal with the molecular mechanisms of these misdirected signaling pathways for the development of novel, targeted therapies

http://www.medizin3.uk-erlangen.de/forschung/arbeitsgruppen/matrixbiologie-entzuendliche-signalwege-in-arthritis-und-fibrose/

McClintock: Meta-pipeline to identify transposable element insertions using next generation sequencing data

BioStar — Tue, 27 Oct 2020 00:21:18 -0500

an integrated bioinformatics pipeline for the detection of TE insertions in whole-genome shotgun data, called McClintock (https://github.com/bergmanlab/mcclintock), which automatically runs and standardizes output for multiple TE detection methods. We demonstrate the utility of McClintock by evaluating six TE detection methods using simulated and real genome data from the model microbial eukaryote, Saccharomyces cerevisiae.

Address of the bookmark: https://github.com/bergmanlab/mcclintock

Single Cell RNAseq data analysis tutorial !!

Robert M Willioms — Mon, 27 Nov 2017 16:24:29 -0600

A major breakthrough (replaced microarrays) in the late 00’s and has been widely used since
Measures the average expression level for each gene across a large population of input cells
Useful for comparative transcriptomics, e.g. samples of the same tissue from different species
Useful for quantifying expression signatures from ensembles, e.g. in disease studies
Insufficient for studying heterogeneous systems, e.g. early development studies, complex tissues (brain)
Does not provide insights into the stochastic nature of gene expression

Following are the useful links:

Single Cell RNAseq data analysis Tutorial

A step-by-step workflow for low-level analysis of single-cell RNA-seq data

A step-by-step workflow for low-level analysis of single-cell RNA-seq data with Bioconductor

SCell: single-cell RNA-seq analysis software

https://github.com/diazlab/SCell

Beta-Poisson model for single-cell RNA-seq data analyses

https://github.com/nghiavtr/BPSC

Sincera: A Computational Pipeline for Single Cell RNA-Seq Profiling Analysis

https://research.cchmc.org/pbge/sincera.html

SC3 – consensus clustering of single-cell RNA-Seq data

http://biorxiv.org/content/early/2016/09/02/036558

Citrus: A toolkit for single cell sequencing analysis

http://biorxiv.org/content/early/2016/09/14/045070

Single-Cell Resolution of Temporal Gene Expression during Heart Development

http://www.cell.com/developmental-cell/fulltext/S1534-5807(16)30682-7

Scalable latent-factor models applied to single-cell RNA-seq data separate biological drivers from confounding effects

http://biorxiv.org/content/early/2016/11/15/087775

Single cell transcriptomes identify human islet cell signatures and reveal cell-type-specific expression changes in type 2 diabetes

http://genome.cshlp.org/content/early/2016/11/18/gr.212720.116.abstract

SCODE: An efficient regulatory network inference algorithm from single-cell RNA-Seq during differentiation

http://biorxiv.org/content/early/2016/11/21/088856

SCOUP is a probabilistic model to analyze single-cell expression data during differentiation

https://github.com/hmatsu1226/SCOUP

scLVM is a modelling framework for single-cell RNA-seq data

https://github.com/PMBio/scLVM

Selective Locally linear Inference of Cellular Expression Relationships (SLICER) algorithm for inferring cell trajectories

https://github.com/jw156605/SLICER

SinQC: A Method and Tool to Control Single-cell RNA-seq Data Quality

http://www.morgridge.net/SinQC.html

TSCAN: Pseudo-time reconstruction and evaluation in single-cell RNA-seq analysis

https://github.com/zji90/TSCAN

Visualization and cellular hierarchy inference of single-cell data using SPADE

http://www.nature.com/nprot/journal/v11/n7/full/nprot.2016.066.html

OEFinder: Identify ordering effect genes in single cell RNA-seq data

https://github.com/lengning/OEFinder

DISCO : multi threaded and multiprocess distributed memory overlap-layout-consensus (OLC) metagenome assembler

Jit — Mon, 10 Jul 2017 10:09:27 -0500

DISCO is a multi threaded and multiprocess distributed memory overlap-layout-consensus (OLC) metagenome assembler. Disco was developed as a scalable assembler to assemble large metagenomes from billions of Illumina sequencing reads of complex microbial communities. Disco was parallelized for computer clusters in a hybrid architecture that integrated shared-memory multi-threading, point-to-point message passing, and remote direct memory access. The assembly and scaffolding were performed using an iterative overlap graph approach.

Address of the bookmark: http://disco.omicsbio.org/

ONT assembly and Illumina polishing pipeline

Jit — Thu, 23 Nov 2017 10:13:42 -0600

This pipeline performs the following steps:

Assembly of nanopore reads using Canu.
Polish canu contigs using racon (optional).
Map a paired-end Illumina dataset onto the contigs obtained in the previous steps using BWA mem.
Perform correction of contigs using pilon and the Illumina dataset.

Address of the bookmark: https://github.com/nanoporetech/ont-assembly-polish

dnaPipeTE: de-novo assembly & annotation Pipeline for Transposable Elements

Rahul Nayak — Sat, 02 Dec 2017 18:25:44 -0600

dnaPipeTE (for de-novo assembly & annotation Pipeline for Transposable Elements), is a pipeline designed to find, annotate and quantify Transposable Elements in small samples of NGS datasets. It is very useful to quantify the proportion of TEs in newly sequenced genomes since it does not require genome assembly and works on small datasets (< 1X).

dnaPipeTE is developped by Clément Goubert, Laurent Modolo and the TREEP team of the LBBE: http://lbbe.univ-lyon1.fr/-Equipe-Elements-transposables-.html?lang=en
You can find the original publication in GBE here: https://academic.oup.com/gbe/article/7/4/1192/533768

output examples of quantification and TE landscape (relative age) produced by dnaPipeTE

Address of the bookmark: https://github.com/clemgoub/dnaPipeTE

RGFA: powerful and convenient handling of assembly graphs

Rahul Nayak — Thu, 25 Jan 2018 05:47:53 -0600

RGFA, an implementation of the proposed GFA specification in Ruby. It allows the user to conveniently parse, edit and write GFA files. Complex operations such as the separation of the implicit instances of repeats and the merging of linear paths can be performed. A typical application of RGFA is the editing of a graph, to finish the assembly of a sequence, using information not available to the assembler. We illustrate a use case, in which the assembly of a repetitive metagenomic fosmid insert was completed using a script based on RGFA.

https://github.com/ggonnella/rgfa

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5103826/