BOL: Related items

shinyChromosome:a GUI for the interactive creation of non-circular whole genome diagrams

Jit — Sat, 29 Feb 2020 00:39:50 -0600

shinyChromosome is a graphical user interface for interactive creation of non-circular whole genome diagrams developed using the R Shiny package.

To create single-genome plot by aligning genome data along all chromosomes of a single genome, go to the Single-genome plot menu.

To cretae two-genome plot for comparison of data across two genomes, go to the Two-genome plot menu.

For the detail format of input data, check the Input data format submenu of the Help menu.

shinyChromosome is deployed at http://150.109.59.144:3838/shinyChromosome/, http://shinyChromosome.ncpgr.cn, and https://yimingyu.shinyapps.io/shinyChromosome for online use. The source code and manual of shinyChromosome are freely available at https://github.com/venyao/shinyChromosome.

https://yimingyu.shinyapps.io/shinychromosome/

https://www.sciencedirect.com/science/article/pii/S1672022919301883

Address of the bookmark: https://yimingyu.shinyapps.io/shinychromosome/

Ancient whole genome duplication (WGD) detection tools !

Rahul Nayak — Sun, 07 Mar 2021 00:32:44 -0600

There are two methods for ancient WGD detection, one is collinearity analysis, and the other is based on the Ks distribution map. Among them, Ks is defined as the average number of synonymous substitutions at each synonymous site, and there is also a Ka corresponding to it, which refers to the average number of non-synonymous substitutions at each non-synonymous site.

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

For more reading - There are 9 sub-modules in WGD

kde: KDE fitting to the Ks distribution
ksd: Ks distribution construction
mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
mix: Hybrid modeling of Ks distribution.
pre: preprocess the CDS file
syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
viz: draw histogram and density plot
wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

DFAST: a flexible prokaryotic genome annotation pipeline for faster genome publication

Jit — Tue, 14 Nov 2017 10:26:16 -0600

We developed a prokaryotic genome annotation pipeline, DFAST, that also supports genome submission to public sequence databases. DFAST was originally started as an on-line annotation server, and to date, over 7,000 jobs have been processed since its first launch in 2016. Here, we present a newly implemented background annotation engine for DFAST, which is also available as a standalone command-line program. The new engine can annotate a typical-sized bacterial genome within 10 minutes, with rich information such as pseudogenes, translation exceptions, and orthologous gene assignment between given reference genomes. In addition, the modular framework of DFAST allows users to customize the annotation workflow easily and will also facilitate extensions for new functions and incorporation of new tools in the future.

Availability and Implementation

The software is implemented in Python 3 and runs in both Python 2.7 and 3.4– on Macintosh and Linux systems. It is freely available at https://github.com/nigyta/dfast_core/ under the GPLv3 license with external binaries bundled in the software distribution. An on-line version is also available at https://dfast.nig.ac.jp/.

Address of the bookmark: https://dfast.nig.ac.jp/

AliTV—interactive visualization of whole genome comparisons

Jit — Wed, 10 Jan 2018 07:08:17 -0600

AliTV, which provides interactive visualization of whole genome alignments. AliTV reads multiple whole genome alignments or automatically generates alignments from the provided data. Optional feature annotations and phylo- genetic information are supported. The user-friendly, web-browser based and highly customizable interface allows rapid exploration and manipulation of the visualized data as well as the export of publication-ready high-quality figures. AliTV is freely available at https://github.com/AliTVTeam/AliTV

https://alitvteam.github.io/AliTV/

Address of the bookmark: https://github.com/AliTVTeam/AliTV

JBrowse: Embeddable genome browser built completely with JavaScript and HTML5

Jit — Fri, 29 Jun 2018 09:19:56 -0500

JBrowse is a fast, embeddable genome browser built completely with JavaScript and HTML5, with optional run-once data formatting tools written in Perl. Headline Features: Fast, smooth scrolling and zooming. Explore your genome with unparalleled speed. Scales easily to multi-gigabase genomes and deep-coverage sequencing. Quickly open and view data files on your computer without uploading them to any server. Supports GFF3, BED, FASTA, Wiggle, BigWig, BAM, VCF (with either .tbi or .idx index), REST, and more. BAM, BigBed, BigWig, and VCF data are displayed directly from chunks of the compressed binary files, no conversion needed. Includes an optional “faceted” track selector (see demo) suitable for large installations with thousands of tracks. Very light server resource requirements. In fact, JBrowse has no back-end server code, just tools for formatting data files to be read directly over HTTP. Serve huge datasets from a single low-cost cloud instance. Can run as a stand-alone app on OSX and Windows using the Electron platform Highly extensible plugin architecture, with a large plugin registry of existing examples here https://gmod.github.io/jbrowse-registry https://jbrowse.org/

Address of the bookmark: https://github.com/GMOD/jbrowse

Cogent: a tool for reconstructing the coding genome using high-quality full-length transcriptome sequences.

Jit — Tue, 18 Jun 2019 05:33:04 -0500

Cogent is a tool that identifies gene families and reconstructs the coding genome using high-quality transcriptome data without a reference genome, and can be used to check assemblies for the presence of these known coding sequences.

Cogent is a tool for reconstructing the coding genome using high-quality full-length transcriptome sequences. It is designed to be used on Iso-Seq data and in cases where there is no reference genome or the ref genome is highly incomplete.

See a recent presentation on Cogent being applied to the Cuttlefish Iso-Seq data.

Cogent preliminary draft paper (updated 2016Dec version), Supplementary

Please see wiki for details on usage.

Address of the bookmark: https://github.com/Magdoll/Cogent

Biological databases !

BioStar — Wed, 12 Feb 2020 01:16:29 -0600

Now a days there are a lots of genomics databases available around the world. This bookmark is created to provide all links in one place ...

ftp://ftp.ncbi.nih.gov/genomes/

https://hgdownload.soe.ucsc.edu/downloads.html

Address of the bookmark: ftp://ftp.ncbi.nih.gov/genomes/

Smudgeplot: Inference of ploidy and heterozygosity structure using whole genome sequencing data

Neel — Fri, 25 Feb 2022 04:42:09 -0600

This tool extracts heterozygous kmer pairs from kmer count databases and performs gymnastics with them. We are able to disentangle genome structure by comparing the sum of kmer pair coverages (CovA + CovB) to their relative coverage (CovB / (CovA + CovB)). Such an approach also allows us to analyze obscure genomes with duplications, various ploidy levels, etc.

Smudgeplots are computed from raw or even better from trimmed reads and show the haplotype structure using heterozygous kmer pairs. For example:

Address of the bookmark: https://github.com/KamilSJaron/smudgeplot

BLAST Ring Image Generator (BRIG)

Anjana — Fri, 30 Sep 2016 09:18:50 -0500

BRIG is a free cross-platform (Windows/Mac/Unix) application that can display circular comparisons between a large number of genomes, with a focus on handling genome assembly data. The application is available at: http://sourceforge.net/projects/brig

If you have any questions or comments, post them on one of the trackers on BRIG’s SourceForge page: http://sourceforge.net/tracker/?group_id=328245.

Features:

Images show similarity between a central reference sequence and other sequences as concentric rings.
BRIG will perform all BLAST comparisons and file parsing automatically via a simple GUI.
Contig boundaries and read coverage can be displayed for draft genomes; customized graphs and annotations can be displayed.
Using a user-defined set of genes as input, BRIG can display gene presence, absence, truncation or sequence variation in a set of complete genomes, draft genomes or even raw, unassembled sequence data.
BRIG also accepts SAM-formatted read-mapping files enabling genomic regions present in unassembled sequence data from multiple samples to be compared simultaneously

Address of the bookmark: http://brig.sourceforge.net/

Nemo – A stochastic, individual-base, genetically explicit simulation platform

Jit — Sat, 01 Oct 2016 14:45:02 -0500

A recombination map has been added for all multi-locus traits. The map positions (chromosomal) for neutral markers (e.g. SNPs) and loci under selection (QTLs, deleterious mutations, DMIs) can now be specified explicitly, or set at random. The map can hold an unlimited number of loci of different types jointly, at any recombination scale (cM or lower). The effects of linkage can thus be finely explored.
A new trait coding for (Bateson-)Dobzhansky-Muller incompatibility loci. Multiple haploid or diploid pairs of incompatible loci can be spread throughout the genome and affect individual fitness.
Multi-type selection: Individual fitness can be jointly determined by different types of loci under selectinon, such as QTLs coding for quantitative traits under spatially variable selection, universally deleterious mutations, and Dobzhansky-Muller incompatibility loci.
An unlimited number of quantitative traits under different forms of selection can be modelled, based on universally pleiotropic loci with several bi- or multi-allelic models.
Spatial and temporal variation of selection on quantitative traits is possible, modelling shifts of environmental conditions over time.
The dispersal matrix describing the movement of individuals among sub-populations can be replaced by a connectivity matrix and a reduced dispersal matrix describing migration only among the connected sub-populations. This offers a substantial gain in computing time and system memory when simulating very large grids.
Input parameters' arguments may be specified in separate files. This is particularly convenient when specifying large matrices.
Many adjustments have been made for refined control of the input of parameters and data output. See updates in the manual.

Address of the bookmark: http://nemo2.sourceforge.net/index.html