BOL: Related items

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

MashMap: a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s)

Jit — Tue, 12 Dec 2017 17:23:31 -0600

MashMap is a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s). It maps a query sequence against a reference region if and only if its estimated alignment identity is above a specified threshold. It does not compute the alignments explicitly, but rather estimates a k-mer based Jaccard similarity using a combination of Winnowing and MinHash. This is then converted to an estimate of sequence identity using the Mash distance. An appropriate k-mer sampling rate is automatically determined given minimum local alignment length and identity thresholds. The efficiency of the algorithm improves as both of these thresholds are increased.

Address of the bookmark: https://github.com/marbl/MashMap

RGFA: powerful and convenient handling of assembly graphs

Rahul Nayak — Thu, 25 Jan 2018 05:47:53 -0600

RGFA, an implementation of the proposed GFA specification in Ruby. It allows the user to conveniently parse, edit and write GFA files. Complex operations such as the separation of the implicit instances of repeats and the merging of linear paths can be performed. A typical application of RGFA is the editing of a graph, to finish the assembly of a sequence, using information not available to the assembler. We illustrate a use case, in which the assembly of a repetitive metagenomic fosmid insert was completed using a script based on RGFA.

https://github.com/ggonnella/rgfa

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5103826/

Cerulean: A hybrid assembly using high throughput short and long reads

Rahul Nayak — Tue, 05 Jun 2018 10:10:15 -0500

Cerulean extends contigs assembled using short read datasets like Illumina paired-end reads using long reads like PacBio RS long reads. Cerulean v0.1 has been implemented with bacterial genomes in mind. The method is fully described in Deshpande, V., Fung, E. D., Pham, S., & Bafna, V. (2013). Cerulean: A hybrid assembly using high throughput short and long reads. arXiv preprint arXiv:1307.7933. http://arxiv.org/abs/1307.7933

Address of the bookmark: https://sourceforge.net/projects/ceruleanassembler/

FinisherSC:a repeat-aware tool for upgrading de novo assembly using long reads

Jit — Mon, 20 Aug 2018 04:08:50 -0500

Here is the command to run the tool:

python finisherSC.py destinedFolder mummerPath

If you are running on server computer and would like to use multiple threads, then the following commands can generate 20 threads to run FinisherSC.

python finisherSC.py -par 20 destinedFolder mummerPath

Sometimes, if the names of raw reads and contigs consists of special characters/formats, FinisherSC/MUMmer may not parse them correctly. In that case, you want to have a quick renaming of the names of contigs/reads in contigs.fasta or raw_reads.fasta using the following command.

    perl -pe 's/>[^\$]*$/">Seg" . ++$n ."\n"/ge' raw_reads.fasta > newRaw_reads.fasta
    cp newRaw_reads.fasta raw_reads.fasta
    perl -pe 's/>[^\$]*$/">Seg" . ++$n ."\n"/ge' contigs.fasta > newContigs.fasta
    cp newContigs.fasta contigs.fasta

Address of the bookmark: https://github.com/kakitone/finishingTool

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

BioJoker — Tue, 02 Apr 2019 21:54:55 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye

NextDenovo: string graph-based de novo assembler for TGS long reads

Jit — Sun, 05 Jan 2020 04:08:29 -0600

NextDenovo is a string graph-based de novo assembler for TGS long reads. It uses a "correct-then-assemble" strategy similar to canu, but requires significantly less computing resources and storages. After assembly, the per-base error rate is about 97-98%, to further improve single base accuracy, please use NextPolish.

NextDenovo contains two core modules: NextCorrect and NextGraph. NextCorrect can be used to correct TGS long reads with approximately 15% sequencing errors, and NextGraph can be used to construct a string graph with corrected reads. It also contains a modified version of minimap2 for adapting input and output and producing more sensitive and accurate dovetail overlaps, and some useful utilities (see here for more details).

Address of the bookmark: https://github.com/Nextomics/NextDenovo

MEC: Contig Misassembly Correction

BioStar — Tue, 04 Feb 2020 23:40:49 -0600

MEC, to identify and correct misassemblies in contigs. Firstly, MEC takes fragment coverage as the feature to detect the candidate misassemblies. Then, it can distinguish a large number of false positives from the candidate misassemblies based on the distribution of paired-end reads and the statistical analysis of GC-contents. We apply MEC to four real contig datasets, and carry out experiments to analyze the influence of MEC on scaffolding results, which shows that MEC can reduce misassemblies effectively and result in quantitative improvements in scaffolding quality. MEC is publicly available for download at https://github.com/bioinfomaticsCSU/MEC.

Address of the bookmark: https://github.com/bioinfomaticsCSU/MEC

VICUNA: a software tool that enables consensus assembly of ultra-deep sequence derived from diverse viral or other heterogeneous populations.

biogeek — Tue, 25 Aug 2020 03:40:17 -0500

VICUNA is a de novo assembly program targeting populations with high mutation rates. It creates a single linear representation of the mixed population on which intra-host variants can be mapped. For clinical samples rich in contamination (e.g., >95%), VICUNA can leverage existing genomes, if available, to assemble only target-alike reads. After initial assembly, it can also use existing genomes to perform guided merging of contigs. For each data set (e.g., Illumina paired read, 454), VICUNA outputs consensus sequence(s) and the corresponding multiple sequence alignment of constituent reads. VICUNA efficiently handles ultra-deep sequence data with tens of thousands fold coverage.

http://software.broadinstitute.org/viral/docs/vicuna_v1.0.pdf

Address of the bookmark: https://www.broadinstitute.org/viral-genomics/vicuna

GraphUnzip: Phases an assembly graph using Hi-C data and/or long reads.

Jit — Fri, 05 Feb 2021 21:22:24 -0600

GraphUnzip, a fast, memory-efficient and accurate tool to unzip assembly graphs into their constituent haplotypes using long reads and/or Hi-C data. As GraphUnzip only connects sequences in the assembly graph that already had a potential link based on overlaps, it yields high-quality gap-less supercontigs. To demonstrate the efficiency of GraphUnzip, we tested it on a simulated diploid Escherichia coli genome, and on two real datasets for the genomes of the rotifer Adineta vaga and the potato Solanum tuberosum. In all cases, GraphUnzip yielded highly continuous phased assemblies.

https://www.biorxiv.org/content/biorxiv/early/2021/02/01/2021.01.29.428779.full.pdf

Address of the bookmark: https://github.com/nadegeguiglielmoni/GraphUnzip