BOL: Related items

Genome assembly tutorial "Genome Assembly for short and long reads"

Jit — Sat, 19 Jan 2019 17:29:53 -0600

In this lab we will perform de novo genome assembly of a bacterial genome. You will be guided through the genome assembly starting with data quality control, through to building contigs and analysis of the results. At the end of the lab you will know:

How to perform basic quality checks on the input data
How to run a short read assembler on Illumina data
How to run a long read assembler on Pacific Biosciences or Oxford Nanopore data
How to improve the accuracy of a long read assembly using short reads
How to assess the quality of an assembly

https://bioinformaticsdotca.github.io/high-throughput_biology_2017

Address of the bookmark: https://bioinformaticsdotca.github.io/high-throughput_biology_2017_module6_lab

Genome assembly forensics: finding the elusive mis-assembly

Jit — Sat, 26 Jan 2019 18:02:01 -0600

We present the first collection of tools aimed at automated genome assembly validation. This work formalizes several mechanisms for detecting mis-assemblies, and describes their implementation in our automated validation pipeline, called amosvalidate. We demonstrate the application of our pipeline in both bacterial and eukaryotic genome assemblies, and highlight several assembly errors in both draft and finished genomes. The software described is compatible with common assembly formats and is released, open-source, at http://amos.sourceforge.net.

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2397507/

http://amos.sourceforge.net/wiki/index.php/AMOS

Address of the bookmark: http://amos.sourceforge.net/wiki/index.php/AMOS

SvABA: Structural variation and indel detection by local assembly

Jit — Tue, 10 Mar 2020 07:52:15 -0500

SvABA is a method for detecting structural variants in sequencing data using genome-wide local assembly. Under the hood, SvABA uses a custom implementation of SGA (String Graph Assembler) by Jared Simpson, and BWA-MEM by Heng Li. Contigs are assembled for every 25kb window (with some small overlap) for every region in the genome. The default is to use only clipped, discordant, unmapped and indel reads, although this can be customized to any set of reads at the command line using VariantBam rules. These contigs are then immediately aligned to the reference with BWA-MEM and parsed to identify variants. Sequencing reads are then realigned to the contigs with BWA-MEM, and variants are scored by their read support.

Address of the bookmark: https://github.com/walaj/svaba

RefKA: A fast and efficient long-read genome assembly approach for large and complex genomes

Rahul Nayak — Fri, 01 May 2020 03:00:40 -0500

RefKA, a reference-based approach for long read genome assembly. This approach relies on breaking up a closely related reference genome into bins, aligning k-mers unique to each bin with PacBio reads, and then assembling each bin in parallel followed by a final bin-stitching step.

Address of the bookmark: https://github.com/AppliedBioinformatics/RefKA

CANU: Assembling Large Genomes with Single-Molecule Sequencing and Locality Sensitive Hashing.

Jit — Tue, 26 Apr 2016 11:38:10 -0500

Canu is a fork of the Celera Assembler designed for high-noise single-molecule sequencing (such as the PacBio RSII or Oxford Nanopore MinION). The software is currently alpha level, feel free to use and report issues encountered.

Canu is a hierachical assembly pipeline which runs in four steps:

Detect overlaps in high-noise sequences using MHAP
Generate corrected sequence consensus
Trim corrected sequences
Assemble trimmed corrected sequences

Read the documentation

New release https://github.com/marbl/canu/releases

Address of the bookmark: https://github.com/marbl/canu

Redundans

Jit — Thu, 01 Sep 2016 08:28:11 -0500

Redundans pipeline assists an assembly of heterozygous genomes.
Program takes as input assembled contigs, paired-end and/or mate pairs sequencing libraries and returns scaffolded homozygous genome assembly, that should be less fragmented and with total size smaller than the input contigs. In addition, Redundans will automatically close the gaps resulting from genome assembly or scaffolding more details.

The pipeline consists of three steps/modules:

redundancy reduction: detection and selectively removal of redundant contigs from an initial de novo assembly
scaffolding: joining of genome fragments using paired-end and/or mate-pairs reads
gap closing

Redundans is:

fast & lightweight, multi-core support and memory-optimised, so it can be run even on the laptop for small-to-medium size genomes
flexible toward many sequencing technologies (Illumina, 454 or Sanger) and library types (paired-end, mate pairs, fosmids)
modular: every step can be ommited or replaced by another tools

Address of the bookmark: https://github.com/Gabaldonlab/redundans

Standardized velvet assembly report

Poonam Mahapatra — Fri, 09 Dec 2016 03:59:59 -0600

Requirements:

velvet (velveth velvetg should be in your PATH)
R (with Sweave)
pdflatex (usually part of TeTeX)
ggplot2 (from R prompt type install.packages("ggplot2","proto","xtable"))
Perl

Optional:

BLAT or BLAST (to generate alignments against a reference genome). If using BLAT, add faToTwoBit,gfClient,gfServer to your PATH. If using BLAST, add blastall and formatdb.

Edit permute.sh to your liking, paying particular attention to the kmer, cvCut, expCov, and other flags

To Run:

perl fastaAllSize mysequences.fa > mysequences.stat or gunzip -c mysequences.fa.gz | fastaAllSize > mysequences.stat Substitute fastqAllSize for fastq files.
./permute.sh mysequences (leave out the .fa)

https://github.com/leipzig/standardized-velvet-assembly-report

Address of the bookmark: https://github.com/leipzig/standardized-velvet-assembly-report

ScaffMatch

Jit — Tue, 13 Dec 2016 10:23:56 -0600

caffMatch is a novel scaffolding tool based on Maximum-Weight Matching able to produce high-quality scaffolds from NGS data (reads and contigs). The tool is written in Python 2.7. It also includes a bash script wrapper that calls aligner in case one needs to first map reads to contigs (instead of providing .sam files).

The arguments accepted by ScaffMatch are:

-w) Working directory -- this is the directory where ScaffMatch files are stored. These are .sam files produced after mapping reads to contigs and the resulting scaffolds file `scaffolds.fa` fasta file;

-c) Contig fasta file;

-m) Command line argument with no options. It is used when .sam files are used instead of reads .fastq files. Do not use this option if you provide reads files;

-1) (Comma separated list of) either .fastq or .sam file(s) corresponding to the first read of the read pair;

-2) (Comma separated list of) either .fastq or .sam file(s) corresponding to the second read of the read pair;

-i) (Comma separated list of) insert size(s) of the library(-ies);

-s) (Comma separated list of) library(-ies) standard deviation(s) of insert size(s);

-t) Bundle threshold. Pairs of contigs supported by number of read pairs less than the value of this argument are discarded. Optional argument, by default it is equal to 5;

-g) Matching heuristics: use `max_weight` for Maximum Weight Matching heuristics with the Insertion step, use `backbone` for Maximum Weight Matching heuristics without the Insertion step, use `greedy` for Greedy Matching heuristics;

-l) Log file - where to store the logs. Optional argument. By default, stdout is used.

Address of the bookmark: http://alan.cs.gsu.edu/NGS/?q=content/scaffmatch

PEAR

Jit — Mon, 19 Dec 2016 09:28:30 -0600

PEAR is an ultrafast, memory-efficient and highly accurate pair-end read merger. It is fully parallelized and can run with as low as just a few kilobytes of memory.

PEAR evaluates all possible paired-end read overlaps and without requiring the target fragment size as input. In addition, it implements a statistical test for minimizing false-positive results. Together with a highly optimized implementation, it can merge millions of paired end reads within a couple of minutes on a standard desktop computer.

Address of the bookmark: http://sco.h-its.org/exelixis/web/software/pear/doc.html

Genome Assembly Tutorial

Abhimanyu Singh — Tue, 20 Dec 2016 07:56:01 -0600

If genomes were completely random sequences in a statistical sense, 'overlap-consensus-layout' method would have been enough to assemble large genomes from Sanger reads. In contrast, real genomes often have long repetitive regions, and they are hard to assemble using overlap-consensus-layout approach. De Bruijn graph-based assembly approach was originally proposed to handle the assembly of repetitive regions better.

More at http://www.homolog.us/Tutorials/index.php?p=1.4&s=1

Address of the bookmark: http://www.homolog.us/Tutorials/index.php?p=1.4&s=1