BOL: Related items

Genome assembly stats plotting

Jit — Wed, 28 Feb 2018 03:45:39 -0600

A de novo genome assembly can be summarised b

y a number of metrics, including:

Overall assembly length
Number of scaffolds/contigs
Length of longest scaffold/contig
Scaffold/contig N50 and N90Assembly base composition, in particular percentage GC and percentage Ns
CEGMA completeness
Scaffold/contig length/count distribution

assembly-stats supports two widely used presentations of these values, tabular and cumulative length plots, and introduces an additional circular plot that summarises most commonly used assembly metrics in a single visualisation. Each of these presentations is generated using javascript from a common (JSON) data structure, allowing toggling between alternative views, and each can be applied to a single or multiple assemblies to allow direct comparison of alternate assemblies.

Tabular presentation allows direct comparison of exact values between assemblies, the limitations of this approach lie in the necessary omission of distributions and the challenge of interpreting ratios of values that may vary by several orders of magnitude.

Address of the bookmark: https://github.com/rjchallis/assembly-stats

assemblytics: delta file to analyze alignments of an assembly to another assembly or a reference genome

Jit — Thu, 14 Jun 2018 07:31:00 -0500

Download and install MUMmer Align your assembly to a reference genome using nucmer (from MUMmer package) $ nucmer -maxmatch -l 100 -c 500 REFERENCE.fa ASSEMBLY.fa -prefix OUT Consult the MUMmer manual if you encounter problems Optional: Gzip the delta file to speed up upload (usually 2-4X faster) $ gzip OUT.delta Then use the OUT.delta.gz file for upload. Upload the .delta or delta.gz file (view example) to Assemblytics Important: Use only contigs rather than scaffolds from the assembly. This will prevent false positives when the number of Ns in the scaffolded sequence does not match perfectly to the distance in the reference. The unique sequence length required represents an anchor for determining if a sequence is unique enough to safely call variants from, which is an alternative to the mapping quality filter for read alignment. http://assemblytics.com/

Address of the bookmark: http://assemblytics.com/

HaploMerger2: rebuilding both haploid sub-assemblies from high-heterozygosity diploid genome assembly

BioStar — Thu, 27 Sep 2018 07:08:47 -0500

HM2 can process any diploid assemblies, but it is especially suitable for diploid assemblies with high heterozygosity (≥3%), which can be difficult for other tools. This pipeline also implements flexible and sensitive assembly error detection, a hierarchical scaffolding procedure and a reliable gap-closing method for haploid sub-assemblies.

Source code, executables and the testing dataset are freely available at https://github.com/mapleforest/HaploMerger2/releases/.

Address of the bookmark: https://github.com/mapleforest/HaploMerger2/releases/

Referee: Genome assembly quality scores

Jit — Sun, 04 Nov 2018 16:44:30 -0600

Modern genome sequencing technologies provide a succint measure of quality at each position in every read, however all of this information is lost in the assembly process. Referee summarizes the quality information from the reads that map to a site in an assembled genome to calculate a quality score for each position in the genome assembly.

We accomplish this by first calculating genotype likelihoods for every site. For a given site in a diploid genome, there are 10 possible genotypes (AA, AC, AG, AT, CC, CG, CT, GG, GT, TT). Referee takes as input the genotype likelihoods calculated for all 10 genotypes given the called reference base at each position.

Referee is a program to calculate a quality score for every position in a genome assembly. This allows for easy filtering of low quality sites for any downstream analysis.

https://github.com/gwct/referee

Address of the bookmark: https://gwct.github.io/referee/#

ALLHiC: Phasing and scaffolding polyploid genomes based on Hi-C data

BioStar — Thu, 20 Dec 2018 12:03:32 -0600

The major problem of scaffolding polyploid genome is that Hi-C signals are frequently detected between allelic haplotypes and any existing stat of art Hi-C scaffolding program links the allelic haplotypes together. To solve the problem, we developed a new Hi-C scaffolding pipeline, called ALLHIC, specifically tailored to the polyploid genomes. ALLHIC pipeline contains a total of 5 steps: prune, partition, rescue, optimize and build.

Address of the bookmark: https://github.com/tangerzhang/ALLHiC/wiki

Evaluation of genome assembly software based on long reads

BioStar — Fri, 01 Feb 2019 11:55:54 -0600

TGS technologies have been used to produce highly accurate de novo assemblies of hundreds of microbial genomes and highly contiguous reconstructions of many dozens of plant and animal genomes, enabling new insights into evolution and sequence diversity. They have also been applied to resequencing analyses, to create detailed maps of structural variations in many species. Also, these new technologies have been used to fill in many of the gaps in the human reference genome.

In this report, we compare and evaluate several genome assembly software based on TSG technology. The experimentation has been performed on 4 reference genomes and the results evaluated with the QUAST software. The 11 software that have been evaluated are: Celera Assembler , Falcon , Miniasm, Newbler , SGA Assembler, Smartdenovo, Abruijn, Ra, DBG2OLC, Spades and Cerulean. The first 8 software use only long reads, while the 3 last software can merge long and short reads

GMASS: a novel measure for genomeassembly structural similarity

Abhimanyu Singh — Sun, 14 Apr 2019 20:35:40 -0500

The GMASS score is a novel measure for representing structural similarity between two assemblies. It will contribute to the understanding of assembly output and developing de novo assemblers.

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2710-z

Address of the bookmark: http://bioinfo.konkuk.ac.kr/GMASS/htdocs/syncircos.php

CANU: Assembling Large Genomes with Single-Molecule Sequencing and Locality Sensitive Hashing.

Jit — Tue, 26 Apr 2016 11:38:10 -0500

Canu is a fork of the Celera Assembler designed for high-noise single-molecule sequencing (such as the PacBio RSII or Oxford Nanopore MinION). The software is currently alpha level, feel free to use and report issues encountered.

Canu is a hierachical assembly pipeline which runs in four steps:

Detect overlaps in high-noise sequences using MHAP
Generate corrected sequence consensus
Trim corrected sequences
Assemble trimmed corrected sequences

Read the documentation

New release https://github.com/marbl/canu/releases

Address of the bookmark: https://github.com/marbl/canu

Redundans

Jit — Thu, 01 Sep 2016 08:28:11 -0500

Redundans pipeline assists an assembly of heterozygous genomes.
Program takes as input assembled contigs, paired-end and/or mate pairs sequencing libraries and returns scaffolded homozygous genome assembly, that should be less fragmented and with total size smaller than the input contigs. In addition, Redundans will automatically close the gaps resulting from genome assembly or scaffolding more details.

The pipeline consists of three steps/modules:

redundancy reduction: detection and selectively removal of redundant contigs from an initial de novo assembly
scaffolding: joining of genome fragments using paired-end and/or mate-pairs reads
gap closing

Redundans is:

fast & lightweight, multi-core support and memory-optimised, so it can be run even on the laptop for small-to-medium size genomes
flexible toward many sequencing technologies (Illumina, 454 or Sanger) and library types (paired-end, mate pairs, fosmids)
modular: every step can be ommited or replaced by another tools

Address of the bookmark: https://github.com/Gabaldonlab/redundans

Standardized velvet assembly report

Poonam Mahapatra — Fri, 09 Dec 2016 03:59:59 -0600

Requirements:

velvet (velveth velvetg should be in your PATH)
R (with Sweave)
pdflatex (usually part of TeTeX)
ggplot2 (from R prompt type install.packages("ggplot2","proto","xtable"))
Perl

Optional:

BLAT or BLAST (to generate alignments against a reference genome). If using BLAT, add faToTwoBit,gfClient,gfServer to your PATH. If using BLAST, add blastall and formatdb.

Edit permute.sh to your liking, paying particular attention to the kmer, cvCut, expCov, and other flags

To Run:

perl fastaAllSize mysequences.fa > mysequences.stat or gunzip -c mysequences.fa.gz | fastaAllSize > mysequences.stat Substitute fastqAllSize for fastq files.
./permute.sh mysequences (leave out the .fa)

https://github.com/leipzig/standardized-velvet-assembly-report

Address of the bookmark: https://github.com/leipzig/standardized-velvet-assembly-report