BOL: Related items

Quick next generation sequencing (NGS) terms definition

Neel — Fri, 09 Jun 2017 04:52:26 -0500

fragment size: the Illumina WGS protocol generates paired-end reads from both ends of longer fragments. The lengths of these fragments are assumed to be sampled from a normal distribution. Therefore, in the absence of structural variants, mapping locations of the paired ends span within an interval [δmin,δmax]. Most (>90%) of paired-end reads are sampled from no-SV regions, therefore the fragment size distribution can be learned empirically for each WGS data set separately.

concordant reads: a read pair is called concordant if they can be mapped to the reference genome as “expected”: (a) mapped to opposing strands where the upstream read is mapped to the forward strand and the downstream read is mapped to the reverse strand2, (b) the distance between ends is between the minimum and maximum expected fragment size.

discordant reads: briefly, any non-concordant read pair is considered discordant. Note that, by definition, the discordant read pairs signal potential SVs. The sequence signature produced by these type of reads is known as read-pair signature.

split reads: a read that can only be mapped to the reference genome by breaking into two sub-reads is called a split-read. These types of reads also indicate a potential SV or a short insertion or deletion (indel).

read depth: number of reads that map within a region of the genome. Overall genome-wide read depth is also referred to as depth of coverage. It is expected that the number of reads that “cover” each base-pair to follow a Poisson distribution. Therefore, if the read depth over a certain region deviates significantly from this distribution, it signals for a potential copy number variation (CNV).

PLAST: A fast, accurate and NGS scalable bank-to-bank sequence similarity search tool

Jit — Fri, 01 Dec 2017 04:10:54 -0600

PLAST is a fast, accurate and NGS scalable bank-to-bank sequence similarity search tool providing significant accelerations of seeds-based heuristic comparison methods, such as the Blast suite of algorithms.

Relying on unique software architecture, PLAST takes full advantage of recent multi-core personal computers without requiring any additional hardware devices.

PLAST stands for Parallel Local Sequence Alignment Search Tool and is was published in BMC Bioinformatics.

PLAST is a general purpose sequence comparison tool providing the following benefits:

PLAST is a high-performance sequence comparison tool designed to compare two sets of sequences (query vs. reference),
Reduces the processing time of sequences comparisons while providing highest quality results,
Contains a fully integrated data filtering engine capable of selecting relevant hits with user-defined criteria (E-Value, identity, coverage, alignment length, etc.),
Does not require any additional hardware, since it is a software solution. It is easy to install, cost-effective, takes full advantage of multi-core processors and uses a small RAM footprint,
Ready to be used on desktop computer, cluster, cloud as well as within distributed system running Hadoop.

https://plast.inria.fr/

Address of the bookmark: https://plast.inria.fr/

MIX: Combining multiple assemblies from NGS data

Rahul Nayak — Tue, 08 May 2018 04:58:05 -0500

Mix is a tool that combines two or more draft assemblies, without relying on a reference genome and has the goal to reduce contig fragmentation and thus speed-up genome finishing. The proposed algorithm builds an extension graph where vertices represent extremities of contigs and edges represent existing alignments between these extremities. These alignment edges are used for contig extension. The resulting output assembly corresponds to a path in the extension graph that maximizes the cumulative contig length.

The Mix algorithm, approach and results were published in BMC bioinformatics : http://www.biomedcentral.com/1471-2105/14/S15/S16.

Address of the bookmark: https://github.com/cbib/MIX

Ranbow: a haplotype assembler for polyploid genomes

Jit — Fri, 01 Jun 2018 07:21:54 -0500

Ranbow is a haplotype assembler for polyploid genomes. It has been developed for the haplotype assembly of the hexaploid sweet potato genome, which is highly heterozygous. Ranbow can also be applied to other polyploid genomes. After a first phasing, Ranbow utilizes the assembled haplotypes to improve the accuracy of variant calling results and to infer the evolutionary history of the organism´s genome. Ranbow has three main modes of function: ranbow hap: for haplotyping ranbow eval: for evaluating of the assemble haplotypes by gold standard (long) reads ranbow phylo: for the phylogenetic analysis

Address of the bookmark: https://www.molgen.mpg.de/ranbow

Convert EnsEMBL GTF to Annotation table (Geneid, GeneSymbol, GeneWiseChrLocation, GeneClass, Strand) Raw

EagleEye — Fri, 24 Jun 2016 18:08:49 -0500

Bash Script source:

https://gist.github.com/santhilalsubhash/367befcf5216be4b1fd9

Information:

This script converts EnsEMBL GTF (Ex: https://gist.githubusercontent.com/santhilalsubhash/1e7cca357e52a181dc25/raw/cfb803e07900a2baefbb6534f1299fd30cb57a29/sample.GTF) file to annotation table format. It generated two files
1) Transcript wise chromosome location with information about transcripts (Ex: https://gist.githubusercontent.com/santhilalsubhash/c7dec516e0338503a4b6/raw/de0af1a39f0005c4ce7321c5ae57fc8b4a14c7f4/sample.GTF_enst_annotation.txt)
2) Gene wise chromosome location with information about genes (Ex: https://gist.githubusercontent.com/santhilalsubhash/c92006c5080f0333bec2/raw/d16e0b2440d73b09b486d3c9751cdb248a73fa0b/sample.GTF_ensg_annotation.txt)

Note: You can download GTF files from http://www.ensembl.org/info/data/ftp/index.html

ComparativeGenomics Exercise2

Neel — Wed, 22 Aug 2018 22:10:56 -0500

COMPARATIVE MICROBIAL GENOMICS ANALYSIS WORKSHOP @ cbs.dtu.dk

Free Bioinformatics workbench https://www.mn.uio.no/ifi/english/research/networks/clsi/earlier_seminars/2012/tammivesth_osloseminarfinal.pdf

BASE: a practical de novo assembler for large genomes using long NGS reads

Rahul Nayak — Fri, 19 Oct 2018 07:25:21 -0500

new de novo assembler called BASE. It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs.

Address of the bookmark: https://github.com/dhlbh/BASE

CANU genome assembly parameters !

Rahul Nayak — Mon, 07 Jan 2019 08:40:37 -0600

Choose the appropriate parameters to run Canu and run it. The assembly will take about an hour. You can use two cores (parameter -maxThreads=2) and you would like to disable cluster option, since we compute on a single Amazon server set off the option to compute on cluster useGrid=false. This specifications should be for your project discussed with a local computing guru. The parameters that are in square brackets [] are optional, symbol | stands for "or".

usage:   canu [-correct | -trim | -assemble | -trim-assemble] \
              [-s ] \
               -p  \
               -d  \
               genomeSize=[g|m|k] \
               -maxThreads=2 \
               useGrid=false \
              [other-options] \
               read_file.fastq.gz

A default Canu run produces usually high quality assembly, example of a command that was used for testing can be found below. However, there are still a lot of parameters that are possible to tweak. For example if we desire to assemble haplotypes separately of if we want to smash them together, we can alternate the error correction process.

canu -p test_asmbl \
     -d asm_test3 \
     genomeSize=2m \
     -maxThreads=2 useGrid=false \
     -pacbio-raw \ ~/pacbio/dna/sample_reads.fastq.gz

There is a brilliant section in documentation about parameter tweaking.

The output directory contains will contain many files. The most interesting ones are:

*.correctedReads.fasta.gz : file containing the input sequences after correction, trim and split based on consensus evidence.
*.trimmedReads.fastq : file containing the sequences after correction and final trimming
*.layout : file containing informations about read inclusion in the final assembly
*.gfa : file containing the assembly graph by Canu
*.contigs.fasta : file containing everything that could be assembled and is part of the primary assembly

The basic stats of assembly can be read from reports generated by the assembler, or calculated using standard UNIX command line tools.

More at https://canu.readthedocs.io/en/latest/faq.html

Simka and SimkaMin are comparative metagenomics method dedicated to NGS datasets

Neel — Sat, 06 Jul 2019 13:56:10 -0500

Simka is a de novo comparative metagenomics tool. Simka represents each dataset as a k-mer spectrum and compute several classical ecological distances between them.

Developper: Gaëtan Benoit, PhD, former member of the Genscale team at Inria.

Contact: claire dot lemaitre at inria dot fr

Simka and SimkaMin are comparative metagenomics method dedicated to NGS datasets. https://gatb.inria.fr/software/simka/

Address of the bookmark: https://github.com/GATB/simka

Bioinformatics Services / CRO Services

RASA Life Sciences — Wed, 06 Nov 2019 00:33:11 -0600

RASA is set to provide premium technical and scientific services in a form of solutions, product development and training. .We are also very proficient in providing the high quality Research & Development services in life science informatics field like Next Generation Sequencing (NGS) Data Analysis,Computational Drug Discovery, Bioinformatics, Chemo-informatics and BIO-IT.

RASA offers faster, better and cost effective cutting edge technology solutions to chemical and life science research and industry. We provide our customers with A seamless model of wide expertise and comprehensive platforms. Our Value is to take our customers