BOL: Related items

Environment for Tree Exploration (ETE) is a Python programming toolkit that assists in the recontruction, manipulation, analysis and visualization of phylogenetic trees

Rahul Nayak — Wed, 27 Nov 2019 05:32:33 -0600

The Environment for Tree Exploration (ETE) is a Python programming toolkit that assists in the recontruction, manipulation, analysis and visualization of phylogenetic trees (although clustering trees or any other tree-like data structure are also supported).

Other tools

https://github.com/shenwei356/taxonkit

ETE, version: 3.1.1
BioPython, version: 1.73
taxadb, version: 0.10.1
TaxonKit, version: 0.5.0

Address of the bookmark: https://pypi.org/project/ete3/3.1.1/

KAT: a K-mer analysis toolkit to quality control NGS datasets and genome assemblies

Jit — Fri, 06 Jul 2018 03:36:45 -0500

KAT is a suite of tools that analyse jellyfish hashes or sequence files (fasta or fastq) using kmer counts. The following tools are currently available in KAT:

hist: Create an histogram of k-mer occurrences from a sequence file. Adds metadata in output for easy plotting.
gcp: K-mer GC Processor. Creates a matrix of the number of K-mers found given a GC count and a K-mer count.
comp: K-mer comparison tool. Creates a matrix of shared K-mers between two (or three) sequence files or hashes.
sect: SEquence Coverage estimator Tool. Estimates the coverage of each sequence in a file using K-mers from another sequence file.
blob: Given, reads and an assembly, calculates both the read and assembly K-mer coverage along with GC% for each sequence in the assembly.SEquence Coverage estimator Tool.
filter: Filtering tools. Contains tools for filtering k-mer hashes and FastQ/A files:
- kmer: Produces a k-mer hash containing only k-mers within specified coverage and GC tolerances.
- seq: Filters a sequence file based on whether or not the sequences contain k-mers within a provided hash.
plot: Plotting tools. Contains several plotting tools to visualise K-mer and compare distributions. The following plot tools are available:
- density: Creates a density plot from a matrix created with the "comp" tool. Typically this is used to compare two K-mer hashes produced by different NGS reads.
- profile: Creates a K-mer coverage plot for a single sequence. Takes in fasta coverage output coverage from the "sect" tool
- spectra-cn: Creates a stacked histogram using a matrix created with the "comp" tool. Typically this is used to compare a jellyfish hash produced from a read set to a jellyfish hash produced from an assembly. The plot shows the amount of distinct K-mers absent, as well as the copy number variation present within the assembly.
- spectra-hist: Creates a K-mer spectra plot for a set of K-mer histograms produced either by jellyfish-histo or kat-histo.
- spectra-mx: Creates a K-mer spectra plot for a set of K-mer histograms that are derived from selected rows or columns in a matrix produced by the "comp".

In addition, KAT contains a python script for analysing the mathematical distributions present in the K-mer spectra in order to determine how much content is present in each peak.

This README only contains some brief details of how to install and use KAT. For more extensive documentation please visit: https://kat.readthedocs.org/en/latest/

https://academic.oup.com/bioinformatics/article/33/4/574/2664339

Address of the bookmark: https://github.com/TGAC/KAT

Jvarkit : Java utilities for Bioinformatics

Jit — Fri, 08 Jun 2018 09:31:55 -0500

Collection of Java tool kits for bioinformatics works: Jvarkit : Java utilities for Bioinformatics

Address of the bookmark: http://lindenb.github.io/jvarkit/

AccNET

Jitendra Narayan — Fri, 07 Oct 2016 05:22:11 -0500

AccNET is a Perl application that presents a new way to study the accessory genome of a given set of organisms. Using the proteomes of these organisms, AccNET create a bipartite network compatible with common network analysis platforms. AccNET collects phylogenetic and functional information in a network improving the analysis capability. Networks offer a new perspective of organism organization through elements acquired by horizontal gene transfers and not constricted by hierarchical structures.

More at https://www.youtube.com/watch?v=vdGuy1GAJrQ

Address of the bookmark: https://sourceforge.net/projects/accnet/

A5-miseq

Jit — Thu, 18 Aug 2016 04:05:23 -0500

_A5-miseq_ is a pipeline for assembling DNA sequence data generated on the Illumina sequencing platform. This README will take you through the steps necessary for running _A5-miseq_.

Point to note:

There are many situations where A5-miseq is not the right tool for the job. In order to produce accurate results, A5-miseq requires Illumina data with certain characteristics. A5-miseq will likely not work well with Illumina reads shorter than around 80nt, or reads where the base qualities are low in all or most reads before 60nt. A5-miseq assumes it is assembling homozygous haploid genomes. Use a different assembler for metagenomes and heterozygous diploid or polyploid organisms. Use a different assembler if a tool like FastQC reports your data quality is dubious. You have been warned! Datasets consisting solely of unpaired reads are not currently supported.

Address of the bookmark: https://sourceforge.net/projects/ngopt/

Bioinformatics tools and software

Jit — Tue, 05 Jul 2016 10:02:26 -0500

USEARCH >
Extreme high-throughput sequence analysis. Orders of magnitude faster than BLAST. MUSCLE >
Multiple sequence alignment. Faster and more accurate than CLUSTALW.

UPARSE >
OTU clustering for 16S and other marker genes. Highly accurate OTU sequences and improved diversity measures. UCHIME >
Chimeric sequence detection. PILER >
De novo genome repeat finder. PILER-CR >
Detection of CRISPR repeats in bacterial genomes. QSCORE >
Compare two multiple alignments for benchmarking. PALS >
Whole-genome alignment. PREFAB >
Protein Reference Alignment Database. MSA benchmark collection >
Selected multiple alignment benchmarks in a standardized FASTA format.

Address of the bookmark: http://drive5.com/software.html

MEGAN6

Neel — Mon, 25 Jul 2016 05:45:22 -0500

Microbiome analysis using a single application

MEGAN6 is a comprehensive toolbox for interactively analyzing microbiome data. All the interactive tools you need in one application.

Taxonomic analysis using the NCBI taxonomy or a customized taxonomy such as SILVA
Functional analysis using InterPro2GO, SEED, eggNOG or KEGG
Bar charts, word clouds, Voronoi tree maps and many other charts
PCoA, clustering and networks
Supports metadata
MEGAN parses many different types of input

Why use MEGAN6?

The software is:

Easy to use. MEGAN6 is a single application and all features are available through menus, toolbars and graphics. No scripting skills required.
Powerful. MEGAN6 allows you to work with hundreds of samples containing hundreds of millions of sequencing reads. Blast-like analysis can be performed using DIAMOND.
Comprehensive. MEGAN6 offers a large range of analysis tools, and is under active development.

Address of the bookmark: https://ab.inf.uni-tuebingen.de/software/megan6

valet

Jit — Thu, 22 Sep 2016 04:27:09 -0500

VALET is a pipeline for performing de novo validation of metagenomic assemblies. VALET checks a number of properties that should hold true for a correct assembly (e.g., mate-pairs are aligned at the correct distance from each other in the assembly, the depth of coverage is fairly uniform along contigs, etc.). The violations of these invariants are reported allowing one to pinpoint areas that were potentially mis-assembled, or to compare the quality of different assemblies. For comparing multiple assemblies of the same data-sets, VALET also reports an overall estimate of the likelihood a particular assembly is correct.

Home Page:

VALET code repository

Address of the bookmark: https://www.cbcb.umd.edu/software/valet

vcfR

Archana Malhotra — Fri, 19 Aug 2016 07:38:24 -0500

Most variant calling pipelines result in files containing large quantities of variant information. The variant call format (vcf) is an increasingly popular format for this data. The format of these files and their content is discussed in the vignette ‘vcf data.’ These files are typically intended to be post-processed (i.e., filtered) as an attempt to remove false positives or otherwise problematic sites. The R package vcfR provides tools to facilitate this filtering as well as to visualize the effects of choices made during this process.

Address of the bookmark: https://cran.r-project.org/web/packages/vcfR/vignettes/visualization_1.html

GeneValidator - Identify problems with predicted genes

Poonam Mahapatra — Fri, 26 Aug 2016 06:00:03 -0500

GeneValidator helps in identifing problems with gene predictions and provide useful information extracted from analysing orthologs in BLAST databases. The results produced can be used by biocurators and researchers who need accurate gene predictions.

If you would like to use GeneValidator on a few sequences, see our online GeneValidator Web App -http://genevalidator.sbcs.qmul.ac.uk.

If you use GeneValidator in your work, please cite us as follows:

Dragan M‡, Moghul MI‡, Priyam A, Bustos C & Wurm Y. 2016. GeneValidator: identify problems with protein-coding gene predictions. Bioinformatics, doi: 10.1093/bioinformatics/btw015.

Address of the bookmark: https://github.com/wurmlab/genevalidator