BOL: Related items

VCF Compare !

Rahul Nayak — Wed, 19 Jan 2022 10:30:14 -0600

compare two BWA mapping methods with the online hg18-mapped data

We first operate a rapid inspection of the different BAM files using samtools flagstat. Illumina provided chr21 read mapping obtained with their GA IIx deep sequencing platform <ftp://webdata:webdata@ussd-ftp.illumina.com/Data/SequencingRuns/NA18507_GAIIx_100_chr21.bam>, aligned to the b36/hg18 reference genome)

Address of the bookmark: https://wiki.bits.vib.be/index.php/NGS_Exercise.6#compare_aln_.26_mem_results_with_vcf-compare

gbtools: Interactive Visualization of Metagenome Bins in R

Jit — Sun, 26 Mar 2017 15:41:31 -0500

We have developed gbtools, a software package that allows users to visualize metagenomic assemblies by plotting coverage (sequencing depth) and GC values of contigs, and also to annotate the plots with taxonomic information. Different sets of annotations, including taxonomic assignments from conserved marker genes or SSU rRNA genes, can be imported simultaneously; users can choose which annotations to plot. Bins can be manually defined from plots, or be imported from third-party binning tools and overlaid onto plots, such that results from different methods can be compared side-by-side. gbtools reports summary statistics of bins including marker gene completeness, and allows the user to add or subtract bins with each other.

Tool at https://github.com/kbseah/genome-bin-tools

Address of the bookmark: http://journal.frontiersin.org/article/10.3389/fmicb.2015.01451/full

fragScaff: Genome Assembly with Contiguity Preserving Transposition

Jit — Mon, 14 May 2018 04:28:14 -0500

Contiguity preserving transposition and sequencing (CPT-seq) is an entirely in vitro means of generating libraries comprised of 9216 indexed pools, each of which contains thousands of sparsely sequenced long fragments ranging from 5 kilobases to >1 megabase. This software, fragScaff, leverages coincidences between the content of different pools as a source of contiguity information for scaffolding de novo genome assemblies. FragScaff is complementary to Lachesis, providing midrange contiguity to support robust, accurate chromosome-scale de novo genome assemblies without the need for laborious in vivo cloning steps.

Further information about fragScaff, including source code, is available at:https://sourceforge.net/projects/fragscaff/files.

Manuscript describing fragScaff was published as: Adey A, Kitzman JO, Burton JN, Daza R, Kumar A, Christiansen L, Ronaghi M, Amini S, L Gunderson K, Steemers FJ, Shendure J#. In vitro, long-range sequence information for de novo genome assembly via transposase contiguity. Genome Research 2014 Dec;24(12):2041-9. doi: 10.1101/gr.178319.114. PubMed PMID: 25327137.

Address of the bookmark: https://sourceforge.net/projects/fragscaff/files/

CGView.js is a Circular Genome Viewing tool

LEGE — Wed, 27 Mar 2024 11:16:24 -0500

CGView.js is a Circular Genome Viewing tool for visualizing and interacting with small genomes. This software is an adaptation of the Java program CGView.

CGView.js is the genome viewer of Proksee, an expert system for genome assembly, annotation and visualization.

Features

Circular and linear views of genomes
Capable of drawing genomes up to 10 Mbp with 1000's of features and 100's contigs
Smooth zooming down to the sequence level
Easily generate features and plots directly form the sequence (e.g. ORFs, GC-content and GC-Skew)
Save high resolution PNG maps up to 8000x8000px
Fully documented API for interacting with CGView.js maps

Address of the bookmark: https://js.cgview.ca/

SMASH: An alignment-free tool to find and visualise rearrangements between pairs of DNA sequences

Jit — Thu, 21 Dec 2017 08:26:57 -0600

SMASH is a completely alignment-free method to find and visualise rearrangements between pairs of DNA sequences. The detection is based on relative compression, namely using a FCM, also known as Markov model, of high context order (typically 20). The method has been approached with a tool (also called SMASH). For visualization, SMASH outputs a SVG image, with an ideogram output architecture, where the patterns are represented with several HSV values (only value varies). The following image, illustrating the information maps between human and chimpanzee for the several chromosomes, depicts an example:

Address of the bookmark: https://github.com/pratas/smash

Coding Ground

Jitendra Narayan — Tue, 17 Mar 2015 00:47:20 -0500

Online coding group for most of the programming languages.

Code in almost all popular languages using Coding Ground. Edit, compile, execute and share your projects, 100% cloud.

http://www.tutorialspoint.com/codingground.htm

Address of the bookmark: http://www.tutorialspoint.com/codingground.htm

Seal: SEquence ALignment evaluation suite

Jit — Wed, 03 Jan 2018 05:05:46 -0600

Seal is a comprehensive sequencing simulation and alignment tool evaluation suite. This software (implemented in Java) provides several utilities that can be used to evaluate alignment algorithms, including:

Reading a pre-existing reference genome from one or more FASTA files.
Alternatively, generating an artificial reference genome based on input parameters (length, repeat count, repeat length, repeat variability rate).
Simulating reads from random locations in the genome based on input parameters of read length, coverage, sequencing error rate, and indel rate.
Applying alignment tools to the genome and the reads through a standardized interface.
Parsing the output of the alignment tool and calculating the number of reads that were correctly or incorrectly mapped.
Computing run times and measures of accuracy.

Seal has interfaces to evaluate the following software packages:

Bowtie
BWA
MAQ
mrFAST
mrsFAST
Novoalign
SHRiMP
SOAPv2

Address of the bookmark: http://compbio.case.edu/seal/

Tools to Predict the Impact of Missense Variants !

Jit — Mon, 23 Apr 2018 12:57:33 -0500

Prioritizing missense variants for further experimental investigation is a key challenge in current sequencing studies for exploring complex and Mendelian diseases. A large number of in silico tools have been employed for the task of pathogenicity prediction, including PolyPhen‐2, SIFT, FatHMM, MutationTaster‐2, MutationAssessor, Combined Annotation Dependent Depletion, LRT, phyloP, and GERP++, as well as optimized methods of combining tool scores, such as Condel and Logit. Due to the wealth of these methods, an important practical question to answer is which of these tools generalize best, that is, correctly predict the pathogenic character of new variants.

Study of 10 tools on five datasets that such a comparative evaluation of these tools is hindered by two types of circularity: they arise due to (1) the same variants or (2) different variants from the same protein occurring both in the datasets used for training and for evaluation of these tools, which may lead to overly optimistic results. Comparative evaluations of predictors that do not address these types of circularity may erroneously conclude that circularity confounded tools are most accurate among all tools, and may even outperform optimized combinations of tools.

Following tools are useful for mis sense muation detection ...

PolyPhen‐2 (PP2)
“Predicts possible impact of an amino acid substitution on the structure and function of a human protein using straightforward physical and comparative considerations”

MutationTaster‐2 (MT2)
“Evaluation of the disease‐causing potential of DNA sequence alterations”

MutationAssessor (MASS)
“Predicts the functional impact of amino acid substitutions in proteins, such as mutations discovered in cancer or missense polymorphisms”

LRT
“Identify a subset of deleterious mutations that disrupt highly conserved amino acids within protein‐coding sequences, which are likely to be unconditionally deleterious”

SIFT
“Predicts whether an amino acid substitution affects protein function”

GERP++
“Identifies constrained elements in multiple alignments by quantifying substitution deficits. These deficits represent substitutions that would have occurred if the element were neutral DNA, but did not occur because the element has been under functional constraint. We refer to these deficits as “rejected substitutions.” Rejected substitutions are a natural measure of constraint that reflects the strength of past purifying selection on the element”

phyloP
“Compute conservation or acceleration P values based on an alignment and a model of neutral evolution”

FatHMM unweighted (FatHMM‐U)
Predicts “functional consequences of both coding variants, that is, nonsynonymous single‐nucleotide variants, and noncoding variants”

FatHMM weighted (FatHMM‐W)
Predicts “functional consequences of both coding variants, that is, nonsynonymous single‐nucleotide variants, and noncoding variants” and its weighting scheme attributes higher tolerance scores to SNVs in proteins, related proteins, or domains that already include a high fraction of pathogenic variantsh

Combined Annotation Dependent Depletion (CADD)
“CADD is a tool for scoring the deleteriousness of single‐nucleotide variants as well as insertion/deletions variants in the human genome”

Public Databases for Bioinformatics !

Jit — Tue, 23 Mar 2021 05:32:15 -0500

https://www.nature.com/articles/s41467-020-17155-y

Server Infrastructure:

File Server:

dhara: Synology 3614 Storage Appliance
4 Core Xeon
108TB disk storage
10Gb ethernet to SCG3
Access atx: dhara:5000
Has btsync server (try it - its much better than dropbox)

Compute Servers:

nandi: Kundaje and Phi Server
24 intel cores
256GB RAM
500GB of SSD storage 
36TB RAID6 local storage
4 Intel Phi's (space for 4 more GPU's)


durga: Montgomery and sensitive data
24 intel cores
256GB RAM
500GB of SSD RAID0 storage 
60TB RAID6 local storage

mitra: Bassik and Web/DB Server
24 core
256GB RAM 
500GB of SSD RAID0 storage 
36TB RAID6 local storage

vayu: Kundaje GPU server
4 core
64GB RAM 
200GB of SSD storage 
8TB RAID10 local storage
4 Nvidia GTX 970 4GB GPUs

amold: Bickel and SGE server
32 AMD core
128GB RAM 
200GB of SSD storage 
12TB RAID5 local storage

wotan: Bickel and SGE server
64 AMD core
256GB RAM 
200GB of SSD storage 
12TB RAID5 local storage

Filesystem:

/users/$USER
default home directory
full backups nightly 
nfs mount to dhara
should store code, papers, and other highly processed data here

/mnt/data/
globally accessible data
should store common data here
e.g. genomes and indexes, annotations, ENCODE data  
if you dont want this to count towards your quote you must chown

/mnt/lab_data/$LAB/
lab accessible data
should store lab project data here 
e.g. ATAC-seq prediction data, enhancer prediction, motif calls

/srv/scratch/$USER
fast local storage
not backed up, but on raid and data will never be deleted
most analysis should be performed here

/srv/persistent/$USER
fast local storage
synced nightly, but not backed up
       ie if the hard drives fail or you delete something and notice 
       within 24 hours we can recover. Otherwise not. (vs home which is 
       properly backed up )  
intermediate analysis products that would be hard to recover should be stored here 
       e.g. stochastic analysis results that need to be kept so that paper 
       results can be reproduced

/srv/www/$LABNAME/
web accessible from mitra.stanford.edu
*NOT BACKED UP*

Some parallel programming patterns:

# gzip a bunch of files
parallel gzip -- *.FILESTOGZIP

# fork example in python:
(for more detailed examples look at 
 https://github.com/nboley/grit/ grit/lib/multiprocessing_utils.py)

import os
import time
import random

import multiprocessing

class ProcessSafeOPStream( object ):
    def __init__( self, writeable_obj ):
        self.writeable_obj = writeable_obj
        self.lock = multiprocessing.Lock()
        self.name = self.writeable_obj.name
        return
    
    def write( self, data ):
        self.lock.acquire()
        self.writeable_obj.write( data )
        self.writeable_obj.flush()
        self.lock.release()
        return
    
    def close( self ):
        self.writeable_obj.close()

def worker(queue, ofp):
    # Try without this
    random.seed()
    while True:
        i = queue.get()
        if i == 'FINISHED': return
        # simulate an expensive function
        x = random.random()
        time.sleep(x/10)
        print i, x
        ofp.write("%i\t%s\n" % (i, x))

NSIMS = 10000
NPROC = 25

# populate queue
todo = multiprocessing.Queue()
for i in xrange(NSIMS): todo.put(i)
for i in xrange(NPROC): todo.put('FINISHED')

ofp = ProcessSafeOPStream( open("output.txt", "w") )

pids = []
for i in xrange(NPROC):
    pid = os.fork()
    if pid == 0:
       worker(todo, ofp)
       os._exit(0)
    else:
       pids.append(pid)  

for pid in pids:
    os.waitpid(pid, 0)

ofp.close()

print "FINISHED"

For use case 1 we obtained the following ENCODE and ROADMAP datasets https://www.encodeproject.org/files/ENCFF446WOD/@@download/ENCFF446WOD.bed.gz, https://www.encodeproject.org/files/ENCFF546PJU/@@download/ENCFF546PJU.bam, https://www.encodeproject.org/files/ENCFF059BEU/@@download/ENCFF059BEU.bam. Blacklisted regions were obtained from http://mitra.stanford.edu/kundaje/akundaje/release/blacklists/hg38-human/hg38.blacklist.bed.gz. The human genome version hg38 was obtained from http://hgdownload.cse.ucsc.edu/goldenPath/hg38/bigZips/hg38.fa.gz.

For use case 2 we used the set of narrowPeak files summarized in https://github.com/wkopp/janggu_usecases/tree/master/extra/urls.txt (archived version v1.0.1). The human genome version hg19 was obtained from http://hgdownload.cse.ucsc.edu/goldenPath/hg19/bigZips/hg19.fa.gz

For use case 3 we used the ENCODE datasets https://www.encodeproject.org/files/ENCFF591XCX/@@download/ENCFF591XCX.bam, https://www.encodeproject.org/files/ENCFF736LHE/@@download/ENCFF736LHE.bigWig, https://www.encodeproject.org/files/ENCFF177HHM/@@download/ENCFF177HHM.bam as we as the GENCODE annotation v29 from ftp://ftp.ebi.ac.uk/pub/databases/gencode/Gencode_human/release_29/gencode.v29.annotation.gtf.gz.

Address of the bookmark: http://mitra.stanford.edu/

Ribbon: Visualizing complex genome alignments and structural variation:

Jit — Wed, 29 Nov 2017 07:40:22 -0600

Ribbon can be used for long reads, short reads, paired-end reads, and assembly/genome alignments. Instructions for each data format are available by clicking on "instructions" in each tab on the right.

Local installation:

You can install Ribbon locally from Github by following the instructions here: https://github.com/MariaNattestad/Ribbon

Address of the bookmark: http://genomeribbon.com/