BOL: Related items

SLR-superscaffolder: A scaffold assemble pipeline for stLFR reads.

Jit — Fri, 14 Feb 2020 14:23:30 -0600

This is a scaffold assembler designed for stLFR reads[1]. It uses the link-reads information from stLFR reads to assemble contigs to scaffolds.

Here is an illustration of this pipeline:

Address of the bookmark: https://github.com/BGI-Qingdao/SLR-superscaffolder

PyParanoid: a pipeline for rapid identification of homologous gene families in a set of genomes

BioStar — Thu, 13 Aug 2020 10:06:19 -0500

PyParanoid is a pipeline for rapid identification of homologous gene families in a set of genomes - a central task of any comparative genomics analysis. The "gold standard" for identifying homologs is to use reciprocal best hits (RBHs) which depends on performing a all-vs-all sequence comparison, usually using BLAST, to determine homology. However, these methods are computationally expensive, requiring O(n2) resources to identify RBHs. This is problematic, as the modern deluge of sequencing data means that comparative genomics analyses could be performed on datasets of thousands of strains.

Address of the bookmark: https://github.com/ryanmelnyk/PyParanoid

AlignGraph2: similar genome-assisted reassembly pipeline for PacBio long reads

Rahul Nayak — Sun, 14 Mar 2021 09:42:47 -0500

AlignGraph2 is the second version of AlignGraph for PacBio long reads. It extends and refines contigs assembled from the long reads with a published genome similar to the sequencing genome.

More at https://academic.oup.com/bib/advance-article-abstract/doi/10.1093/bib/bbab022/6146772

Address of the bookmark: https://github.com/huangs001/AlignGraph2

Illumina based assembly pipeline steps !

Surabhi Chaudhary — Fri, 10 Dec 2021 06:22:54 -0600

Illumina

Merge re-sequenced FastQ files (cat)
Read QC (FastQC)
Adapter trimming (fastp)
Removal of host reads (Kraken 2; optional)
Variant calling
1. Read alignment (Bowtie 2)
2. Sort and index alignments (SAMtools)
3. Primer sequence removal (iVar; amplicon data only)
4. Duplicate read marking (picard; optional)
5. Alignment-level QC (picard, SAMtools)
6. Genome-wide and amplicon coverage QC plots (mosdepth)
7. Choice of multiple variant calling and consensus sequence generation routes (iVar variants and consensus; default for amplicon data || BCFTools, BEDTools; default for metagenomics data)
  - Variant annotation (SnpEff, SnpSift)
  - Consensus assessment report (QUAST)
  - Lineage analysis (Pangolin)
  - Clade assignment, mutation calling and sequence quality checks (Nextclade)
  - Individual variant screenshots with annotation tracks (ASCIIGenome)
8. Intersect variants across callers (BCFTools)
De novo assembly
1. Primer trimming (Cutadapt; amplicon data only)
2. Choice of multiple assembly tools (SPAdes || Unicycler || minia)
  - Blast to reference genome (blastn)
  - Contiguate assembly (ABACAS)
  - Assembly report (PlasmidID)
  - Assembly assessment report (QUAST)
Present QC and visualisation for raw read, alignment, assembly and variant calling results (MultiQC)

Bactopia: a flexible pipeline for complete analysis of bacterial genomes

Abhi — Sat, 08 Jun 2024 16:25:08 -0500

Bactopia is a flexible pipeline for complete analysis of bacterial genomes. The goal of Bactopia is process your data with a broad set of tools, so that you can get to the fun part of analyses quicker!

Bactopia was inspired by Staphopia, a workflow we (Tim Read and myself) released that is targeted towards Staphylococcus aureus genomes. Using what we learned from Staphopia and user feedback, Bactopia was developed from scratch with usability, portability, and speed in mind from the start.

Bactopia uses Nextflow to manage the workflow, allowing for support of many types of environments (e.g. cluster or cloud). Bactopia allows for the usage of many public datasets as well as your own datasets to further enhance the analysis of your sequencing. Bactopia only uses software packages available from Bioconda and Conda-Forge to make installation as simple as possible for all users.

To highlight the use of Bactopia and Bactopia Tools, we performed an analysis of 1,664 public Lactobacillus genomes, focusing on Lactobacillus crispatus, a species that is a common part of the human vaginal microbiome. The results from this analysis are published in mSystems under the title: Bactopia: a flexible pipeline for complete analysis of bacterial genomes

Address of the bookmark: https://bactopia.github.io/latest/

kallisto: a program for quantifying abundances of transcripts from bulk and single-cell RNA-Seq data

Jit — Mon, 07 Jan 2019 10:35:14 -0600

kallisto is a program for quantifying abundances of transcripts from bulk and single-cell RNA-Seq data, or more generally of target sequences using high-throughput sequencing reads. It is based on the novel idea of pseudoalignment for rapidly determining the compatibility of reads with targets, without the need for alignment. On benchmarks with standard RNA-Seq data, kallisto can quantify 30 million human reads in less than 3 minutes on a Mac desktop computer using only the read sequences and a transcriptome index that itself takes less than 10 minutes to build. Pseudoalignment of reads preserves the key information needed for quantification, and kallisto is therefore not only fast, but also as accurate as existing quantification tools. In fact, because the pseudoalignment procedure is robust to errors in the reads, in many benchmarks kallisto significantly outperforms existing tools. kallisto is described in detail in:

Nicolas L Bray, Harold Pimentel, Páll Melsted and Lior Pachter, Near-optimal probabilistic RNA-seq quantification, Nature Biotechnology 34, 525–527 (2016), doi:10.1038/nbt.3519

Address of the bookmark: https://pachterlab.github.io/kallisto/about

McClintock: Meta-pipeline to identify transposable element insertions using next generation sequencing data

BioStar — Tue, 27 Oct 2020 00:21:18 -0500

an integrated bioinformatics pipeline for the detection of TE insertions in whole-genome shotgun data, called McClintock (https://github.com/bergmanlab/mcclintock), which automatically runs and standardizes output for multiple TE detection methods. We demonstrate the utility of McClintock by evaluating six TE detection methods using simulated and real genome data from the model microbial eukaryote, Saccharomyces cerevisiae.

Address of the bookmark: https://github.com/bergmanlab/mcclintock

Tallymer: method to compute K-mer frequencies and its application to annotate large repetitive plant genomes

Jit — Thu, 15 Feb 2018 10:21:02 -0600

Tallymer is based on enhanced suffix arrays. This gives a much larger flexibility concerning the choice of the k-mer size. Tallymer can process large data sizes of several billion bases. We used it in a variety of applications to study the genomes of maize and other plant species. In particular, Tallymer was used to index a set whole genome shotgun sequences from maize (B73) (total size 10⁹ bp).
Tallymer was effective in a variety of applications to aid genome annotation in maize, despite limitations imposed by the relatively low coverage of sequence available.

A manual can be found here.

Address of the bookmark: https://www.zbh.uni-hamburg.de/forschung/arbeitsgruppe-genominformatik/software/tallymer.html

HELIANO: A fast and accurate tool for detection of Helitron-like elements

LEGE — Tue, 13 Aug 2024 07:16:34 -0500

Helitron-like elements (HLE1 and HLE2) are DNA transposons. They have been found in diverse species and seem to play significant roles in the evolution of host genomes. Although known for over twenty years, Helitron sequences are still challenging to identify. Here, we propose HELIANO (Helitron-like elements annotator) as an efficient solution for detecting Helitron-like elements.

https://academic.oup.com/nar/advance-article/doi/10.1093/nar/gkae679/7730539?login=true

Address of the bookmark: https://github.com/Zhenlisme/heliano/

Search Shell Command History

Rahul Nayak — Thu, 12 Jun 2014 17:43:34 -0500

We use couple of hundreads of command in daily basis. Most of them are actually repeated several time. The question remain open how do I search old command history under bash shell and modify or reuse it?

Now a days almost all modern shell allows you to search command history if enabled by user. Use history command to display the history list with line numbers. Lines listed with with a * have been modified by user.

Shell history search command

Type history at a shell prompt:
$ history

It will display the list of all used commandline history with an serial number.

To search particular command, enter:
$ history | grep command-name
$ history | egrep -i 'scp|ssh|ftp'
Emacs Line-Edit Mode Command History Searching

To get previous command containing string, hit [CTRL]+[r] followed by search string:

(reverse-i-search):

To get previous command, hit [CTRL]+[p]. You can also use up arrow key.

CTRL-p

To get next command, hit [CTRL]+[n]. You can also use down arrow key.

CTRL-n

fc command

Apart from hostory command there are fc command to extract the command from history. The fc stands for either "find command" or "fix command.

For example list last 10 command, enter:
$ fc -l 10
To list commands 130 through 150, enter:
$ fc -l 130 150
To list all commands since the last command beginning with ssh, enter:
$ fc -l ssh
You can edit commands 1 through 5 using vi text editor, enter:
$ fc -e vi 1 5

Delete command history

The -c option causes the history list to be cleared by deleting all of the entries:
$ history -c