BOL: Related items

Ancient whole genome duplication (WGD) detection tools !

Rahul Nayak — Sun, 07 Mar 2021 00:32:44 -0600

There are two methods for ancient WGD detection, one is collinearity analysis, and the other is based on the Ks distribution map. Among them, Ks is defined as the average number of synonymous substitutions at each synonymous site, and there is also a Ka corresponding to it, which refers to the average number of non-synonymous substitutions at each non-synonymous site.

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

For more reading - There are 9 sub-modules in WGD

kde: KDE fitting to the Ks distribution
ksd: Ks distribution construction
mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
mix: Hybrid modeling of Ks distribution.
pre: preprocess the CDS file
syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
viz: draw histogram and density plot
wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

Genome Annotation

Sun, 25 Aug 2013 10:53:01 -0500

Dr. Rob Edwards describes some of the problems, challenges, and approches in genome annotation, with a particular emphasis on how the Fellowship for the Interpretation of Genomes (FIG) developed subsystems using the SEED database available at http://www.theseed.org/

BUSCO

Jitendra Narayan — Sun, 07 Feb 2016 16:02:39 -0600

Assessing genome assembly and annotation completeness with Benchmarking Universal Single-Copy Orthologs

More at http://busco.ezlab.org/

Address of the bookmark: http://busco.ezlab.org/

Centurion

Jit — Fri, 12 Feb 2016 04:45:41 -0600

Although centromeres are essential for life and are the subject of extensive research, centromere locations in yeast genomes are difficult to infer, and in most species they are still unknown. Recently, the chromatin conformation assay Hi-C has been re-purposed for diverse applications, including de novo genome assembly, deconvolution of metagenomic samples, and inference of centromere locations. We describe a method, Centurion, that jointly infers the locations of all centromeres in a single yeast genome by exploiting the centromeres’ tendency to cluster in 3D space. We first demonstrate the accuracy of Centurion in identifying known centromere locations from high coverage Hi-C data of budding yeast and a human malaria parasite. We then use two metagenomic samples with relatively low coverage Hi-C data to infer centromere locations for each chromosome in 14 different yeast species. For yeasts with large centromeres (e.g., S. pombe) Centurion predicts the exact centromere locations. For seven yeasts with point centromeres, Centurion predicts most of the centromeres at an average of 5~kb distance from their known locations. Finally, we predict centromere coordinates for six yeast species that currently lack centromere annotations. These results suggest that Centurion can be used for centromere identification for a large number of yeast species, even with a limited amount of Hi-C sequencing.

Paper:http://www.ncbi.nlm.nih.gov/pubmed/25940625

More at http://cbio.ensmp.fr/centurion/

Address of the bookmark: http://cbio.ensmp.fr/centurion/

BRAKER: pipeline for fully automated prediction of protein coding genes with GeneMark-ES/ET and AUGUSTUS in novel eukaryotic genomes

Jit — Thu, 01 Sep 2016 08:02:59 -0500

Gene finding in eukaryotic genomes is notoriously difficult to automate. The task is to design a work flow with a minimal set of tools that would reach state-of-the-art performance across a wide range of species. GeneMark-ET is a gene prediction tool that incorporates RNA-Seq data into unsupervised training and subsequently generates ab initio gene predictions. AUGUSTUS is a gene finder that usually requires supervised training and uses information from RNA-Seq reads in the prediction step. Complementary strengths of GeneMark-ET and AUGUSTUS provided motivation for designing a new combined tool for automatic gene prediction.

http://www.ncbi.nlm.nih.gov/pubmed/26559507

Address of the bookmark: http://bioinf.uni-greifswald.de/bioinf/braker/

Download assemblies from NCBI

Bulbul — Mon, 15 May 2017 06:02:32 -0500

A new “Download assemblies” button is now available in the Assembly database. This makes it easy to download data for multiple genomes without having to write scripts.

For example, you can run a search in Assembly and use check boxes (see left side of screenshot below) to refine the set of genome assemblies of interest. Then, just open the “Download assemblies” menu, choose the source database (GenBank or RefSeq), choose the file type, and start the download. An archive file will be saved to your computer that can be expanded into a folder containing your selected genome data files.

More at https://ncbiinsights.ncbi.nlm.nih.gov/2017/05/08/genome-data-download-made-easy/

DIYA: a bacterial annotation pipeline for any genomics lab

Jit — Fri, 30 Jun 2017 08:48:26 -0500

DIY Genomics is an open source bioinformatics consortium intended to bring a collection of tools and libraries into the hands of small scale genomics labs for the process of sequence assembly and annotation. Projects include DIYA, MGAP, CRISPR, and DIYGV

http://gmod.org/wiki/Diya

Address of the bookmark: https://sourceforge.net/projects/diyg/

chromoMap-An R package for Interactive Visualization and Annotation of Chromosomes

Neel — Fri, 12 Apr 2019 05:30:41 -0500

Provides interactive, configurable and elegant graphics visualization of the chromosomes or chromosome regions of any living organism allowing users to map chromosome elements (like genes, SNPs etc.) on the chromosome plot. It introduces a special plot viz. the "chromosome heatmap" that, in addition to mapping elements, can visualize the data associated with chromosome elements (like gene expression) in the form of heat colors which can be highly advantageous in the scientific interpretations and research work. The package provide multiple features like visualizing multiple sets, chromosome heat-maps, group annotations, adding hyperlinks, and labelling. The plots can be saved as HTML documents that can be customized and shared easily. In addition, you can include them in R Markdown or in R 'Shiny' applications.

Address of the bookmark: https://cran.r-project.org/web/packages/chromoMap/vignettes/chromoMap.html

DRAM: Distilled and Refined Annotation of Metabolism

BioStar — Sat, 06 Jul 2024 04:19:45 -0500

DRAM (Distilled and Refined Annotation of Metabolism) is a tool for annotating metagenomic assembled genomes and VirSorter identified viral contigs. DRAM annotates MAGs and viral contigs using KEGG (if provided by the user), UniRef90, PFAM, dbCAN, RefSeq viral, VOGDB and the MEROPS peptidase database as well as custom user databases. DRAM is run in two stages. First an annotation step to assign database identifiers to gene, and then a distill step to curate these annotations into useful functional categories. Additionally, viral contigs are further analyzed during to identify potential AMGs. This is done via assigning an auxiliary score and flags representing the confidence that a gene is both metabolic and viral.

Ref https://genomicsaotearoa.github.io/metagenomics_summer_school/day4/ex15_gene_annotation_part3/#overview-of-drampy-annotate-output

Address of the bookmark: https://github.com/WrightonLabCSU/DRAM

dnaPipeTE: de-novo assembly & annotation Pipeline for Transposable Elements

Rahul Nayak — Sat, 02 Dec 2017 18:25:44 -0600

dnaPipeTE (for de-novo assembly & annotation Pipeline for Transposable Elements), is a pipeline designed to find, annotate and quantify Transposable Elements in small samples of NGS datasets. It is very useful to quantify the proportion of TEs in newly sequenced genomes since it does not require genome assembly and works on small datasets (< 1X).

dnaPipeTE is developped by Clément Goubert, Laurent Modolo and the TREEP team of the LBBE: http://lbbe.univ-lyon1.fr/-Equipe-Elements-transposables-.html?lang=en
You can find the original publication in GBE here: https://academic.oup.com/gbe/article/7/4/1192/533768

output examples of quantification and TE landscape (relative age) produced by dnaPipeTE

Address of the bookmark: https://github.com/clemgoub/dnaPipeTE