Address of the bookmark: https://github.com/mattharrison/Tiny-Python-3.6-Notebook/blob/master/python.rst

In this tutorial series article, I will explore features and packages of python which are widely used in the big data, NGS, and bioinformatics. I will also walk through a real biological example which shows NGS data processing with the help of python packages and programming.

Python has a couple of points to recommend it to biologists and scientists specifically:

• It's widely used in the scientific community
• It has a couple of very well designed libraries for doing complex scientific computing (although we won't encounter them in this book)
• It lend itself well to being integrated with other, existing tools
• It has features which make it easy to manipulate strings of characters (for example, strings of DNA bases and protein amino acid residues, which we as biologists are particularly fond of)

In general, following are some of the important features of python which makes it a perfect fit for rapid application development.

• Python is interpreted language so the program does not need to be compiled. Interpreter parses the program code and generates the output.
• Python is dynamically typed, so the variables types are defined automatically.
• Python is strongly typed. So the developers need to cast the type manually.
• Less code and more use makes it more acceptable.
• Python is portable, extendable and scalable.

There are two major Python versions, Python 2 and Python 3. Python 2 and 3 are quite different. This tutorial uses Python 3, because it more semantically correct and supports newer features.

I will post tutorial on daily basis on this page. Check the sub-pages on right side.

The easiest way to install Gooey is via pip

pip install Gooey 

Alternatively, you can install Gooey by cloning the project to your local directory

git clone https://github.com/chriskiehl/Gooey.git

run setup.py

python setup.py install

Address of the bookmark: https://github.com/chriskiehl/Gooey

Requirements
Doctoral degree in Bioinformatics, Computational Biology, (Bio)physics/-mathematics, Biochemistry/Biology or similar with strong quantitative and numeric focus
Ability to numerically process complex and large data sets
Good programming skills (R/Bioconductor and/or Python preferred, Linux is a plus)
Experience in analyzing next-generation sequencing data sets using network biology
Scientific publication record in applied bioinformatics
Familiarity with single cell NGS analyses and other –omics techniques is a plus, but not essential

Use the Terminal or an Anaconda Prompt for the following steps.

1. To create an environment:

   conda create --name myenv
   

   NOTE: Replace myenv with the environment name.

2. When conda asks you to proceed, type y:

   proceed ([y]/n)?
   

This creates the myenv environment in /envs/. This environment uses the same version of Python that you are currently using, because you did not specify a version.

To create an environment with a specific version of Python:

conda create -n myenv python=3.4

To create an environment with a specific package:

conda create -n myenv scipy

OR:

conda create -n myenv python
conda install -n myenv scipy

To create an environment with a specific version of a package:

conda create -n myenv scipy=0.15.0

OR:

conda create -n myenv python
conda install -n myenv scipy=0.15.0

To create an environment with a specific version of Python and multiple packages:

conda create -n myenv python=3.4 scipy=0.15.0 astroid babel

TIP: Install all the programs that you want in this environment at the same time. Installing 1 program at a time can lead to dependency conflicts.

To automatically install pip or another program every time a new environment is created, add the default programs to the create_default_packages section of your .condarc configuration file. The default packages are installed every time you create a new environment. If you do not want the default packages installed in a particular environment, use the --no-default-packages flag:

conda create --no-default-packages -n myenv python

TIP: You can add much more to the conda create command. For details, run conda create --help.

➜ redundans git:(master) ✗ conda create --name py27 python=2.7
Solving environment: done

==> WARNING: A newer version of conda exists. <==
current version: 4.5.0
latest version: 4.5.2

Please update conda by running

$ conda update -n base conda

## Package Plan ##

environment location: /home/urbe/anaconda3/envs/py27

added / updated specs:
- python=2.7

The following packages will be downloaded:

package | build
---------------------------|-----------------
wheel-0.31.0 | py27_0 61 KB
python-2.7.15 | h1571d57_0 12.1 MB
certifi-2018.4.16 | py27_0 142 KB
sqlite-3.23.1 | he433501_0 1.5 MB
setuptools-39.1.0 | py27_0 582 KB
openssl-1.0.2o | h20670df_0 3.4 MB
pip-10.0.1 | py27_0 1.7 MB
ca-certificates-2018.03.07 | 0 124 KB
------------------------------------------------------------
Total: 19.6 MB

The following NEW packages will be INSTALLED:

ca-certificates: 2018.03.07-0
certifi: 2018.4.16-py27_0
libedit: 3.1-heed3624_0
libffi: 3.2.1-hd88cf55_4
libgcc-ng: 7.2.0-hdf63c60_3
libstdcxx-ng: 7.2.0-hdf63c60_3
ncurses: 6.0-h9df7e31_2
openssl: 1.0.2o-h20670df_0
pip: 10.0.1-py27_0
python: 2.7.15-h1571d57_0
readline: 7.0-ha6073c6_4
setuptools: 39.1.0-py27_0
sqlite: 3.23.1-he433501_0
tk: 8.6.7-hc745277_3
wheel: 0.31.0-py27_0
zlib: 1.2.11-ha838bed_2

Proceed ([y]/n)? y

Downloading and Extracting Packages
wheel 0.31.0: #################################################################################################################################################################################################### | 100%
python 2.7.15: ################################################################################################################################################################################################### | 100%
certifi 2018.4.16: ############################################################################################################################################################################################### | 100%
sqlite 3.23.1: ################################################################################################################################################################################################### | 100%
setuptools 39.1.0: ############################################################################################################################################################################################### | 100%
openssl 1.0.2o: ################################################################################################################################################################################################## | 100%
pip 10.0.1: ###################################################################################################################################################################################################### | 100%
ca-certificates 2018.03.07: ###################################################################################################################################################################################### | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
#
# To activate this environment, use:
# > source activate py27
#
# To deactivate an active environment, use:
# > source deactivate
#

➜ redundans git:(master) ✗ source activate py27

https://github.com/kyclark/tiny_python_projects

Address of the bookmark: https://github.com/kyclark/tiny_python_projects

Structural variants presentation by

Jan Korbel

European Molecular Biology Laboratory (EMBL) Heidelberg Genome Biology Research Unit

Reference: 

https://www.genome.gov/pages/research/der/1000genomesprojecttutorials/structuralvariants-jankorbel.pdf

Address of the bookmark: https://www.nature.com/articles/srep20802

[Download software package (includes the manual)] (you will be directed first to a registration page and we would very much appreciate if you register) 
[Download manual] 
[Download software note from Molecular Ecology Notes 4: 137-138 (2004)]

To use the UNIX versions, unzip and untar the files in an appropriate directory using

gunzip filename.tar.gz; tar xvf filename.tar

where "filename.tar.gz" is the downloaded file. Winzip will unzip the Windows version. Run the program by typing

./distruct

in UNIX or

distruct

from a Dos prompt in Windows. It will produce a figure using the data that are represented in the Central/South Asia K=5 plot in Science 298: 2381-2385 (2002).

Please send comments or problems with distruct to Noah Rosenberg.

October 15, 2014 — Users of Distruct may also find CLUMPP and CLUMPAK of interest.

Address of the bookmark: https://rosenberglab.stanford.edu/distruct.html