BOL: Related items

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

ARCS: scaffolding genome drafts with linked reads

Rahul Nayak — Tue, 06 Mar 2018 16:35:26 -0600

ARCS, an application that utilizes the barcoding information contained in linked reads to further organize draft genomes into highly contiguous assemblies. We show how the contiguity of an ABySS H.sapiensgenome assembly can be increased over six-fold, using moderate coverage (25-fold) Chromium data. We expect ARCS to have broad utility in harnessing the barcoding information contained in linked read data for connecting high-quality sequences in genome assembly drafts.

Address of the bookmark: https://github.com/bcgsc/ARCS/

MECAT: fast mapping, error correction, and de novo assembly for single-molecule sequencing reads

Rahul Nayak — Fri, 11 May 2018 05:07:45 -0500

MECAT is an ultra-fast Mapping, Error Correction and de novo Assembly Tools for single molecula sequencing (SMRT) reads. MECAT employs novel alignment and error correction algorithms that are much more efficient than the state of art of aligners and error correction tools. MECAT can be used for effectively de novo assemblying large genomes. For example, on a 32-thread computer with 2.0 GHz CPU , MECAT takes 9.5 days to assemble a human genome based on 54x SMRT data, which is 40 times faster than the current PBcR-Mhap pipeline. MECAT performance were compared with PBcR-Mhap pipeline, FALCON and Canu(v1.3) in five real datasets. The quality of assembled contigs produced by MECAT is the same or better than that of the PBcR-Mhap pipeline and FALCON.

https://www.nature.com/articles/nmeth.4432

Address of the bookmark: https://github.com/xiaochuanle/MECAT

Jvarkit : Java utilities for Bioinformatics

Jit — Fri, 08 Jun 2018 09:31:55 -0500

Collection of Java tool kits for bioinformatics works: Jvarkit : Java utilities for Bioinformatics

Address of the bookmark: http://lindenb.github.io/jvarkit/

P_RNA_scaffolder: a fast and accurate genome scaffolder using paired-end RNA-sequencing reads

Jit — Tue, 12 Jun 2018 08:14:41 -0500

P_RNA_scaffolder, a fast and accurate tool using paired-end RNA-sequencing reads to scaffold genomes. This tool aims to improve the completeness of both protein-coding and non-coding genes. After this tool was applied to scaffolding human contigs, the structures of both protein-coding genes and circular RNAs were almost completely recovered and equivalent to those in a complete genome, especially for long proteins and long circular RNAs.

Address of the bookmark: http://www.fishbrowser.org/software/P_RNA_scaffolder/

ReMILO: reference assisted misassembly detection algorithm using short and long reads.

Jit — Fri, 06 Jul 2018 04:27:49 -0500

ReMILO, a reference assisted misassembly detection algorithm that uses both short reads and PacBio SMRT long reads. ReMILO aligns the initial short reads to both the contigs and reference genome, and then constructs a novel data structure called red-black multipositional de Bruijn graph to detect misassemblies. In addition, ReMILO also aligns the contigs to long reads and find their differences from the long reads to detect more misassemblies.

Address of the bookmark: https://github.com/songc001/remilo

SimLoRD: A read simulator for third generation sequencing reads

Aaryan Lokwani — Wed, 22 Aug 2018 10:40:27 -0500

SimLoRD is a read simulator for third generation sequencing reads and is currently focused on the Pacific Biosciences SMRT error model.

Reads are simulated from both strands of a provided or randomly generated reference sequence.

The reference can be read from a FASTA file or randomly generated with a given GC content. It can consist of several chromosomes, whose structure is respected when drawing reads. (Simulation of genome rearrangements may be incorporated at a later stage.)
The read lengths can be determined in four ways: drawing from a log-normal distribution (typical for genomic DNA), sampling from an existing FASTQ file (typical for RNA), sampling from a a text file with integers (RNA), or using a fixed length
Quality values and number of passes depend on fragment length.
Provided subread error probabilities are modified according to number of passes
Outputs reads in FASTQ format and alignments in SAM format

Address of the bookmark: https://bitbucket.org/genomeinformatics/simlord/

BASE: a practical de novo assembler for large genomes using long NGS reads

Rahul Nayak — Fri, 19 Oct 2018 07:25:21 -0500

new de novo assembler called BASE. It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs.

Address of the bookmark: https://github.com/dhlbh/BASE

Genome assembly tutorial "Genome Assembly for short and long reads"

Jit — Sat, 19 Jan 2019 17:29:53 -0600

In this lab we will perform de novo genome assembly of a bacterial genome. You will be guided through the genome assembly starting with data quality control, through to building contigs and analysis of the results. At the end of the lab you will know:

How to perform basic quality checks on the input data
How to run a short read assembler on Illumina data
How to run a long read assembler on Pacific Biosciences or Oxford Nanopore data
How to improve the accuracy of a long read assembly using short reads
How to assess the quality of an assembly

https://bioinformaticsdotca.github.io/high-throughput_biology_2017

Address of the bookmark: https://bioinformaticsdotca.github.io/high-throughput_biology_2017_module6_lab

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

Rahul Nayak — Sat, 06 Jul 2019 03:48:22 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye