BOL: Related items

Ancestral sequence reconstruction steps !

Surabhi Chaudhary — Fri, 18 May 2018 08:28:26 -0500

Ancestral sequence reconstruction (ASR) – also known as ancestral gene/sequence reconstruction/resurrection – is a technique used in the study of molecular evolution. The method consists of the synthesis of an ancestral gene and expression of the corresponding ancestral protein. The idea of protein 'resurrection' was suggested in 1963 by Pauling and Zuckerkandl. Some early efforts were made in the eighties-nineties, led by the laboratory of Steven A. Benner, showing the potential of this technique – one that only started to be fulfilled in the post-genomic era. Thanks to the improvement of algorithms and of better sequencing and synthesis techniques, the method was developed further in the early 2000s to allow the resurrection of a greater variety of and much more ancient genes. Over the last decade, ancestral protein resurrection has developed as a strategy to reveal the mechanisms and dynamics of protein evolution.

BEAST is the best way to predict the ancestral structure. but, I suggest following steps?

1- Alignments "Mafft - http://mafft.cbrc.jp/alignment/software/source.html"

mafft --maxiterate 1000 --reorder --thread 24 --genafpair Dataset.fasta > Dataset_Alig.fasta

2- Your dataset has a good phylogenetic signal, is possible to perform with Tree-Puzzle "http://www.tree-puzzle.de";

3 - This dataset which the saturation index, I perform with "http://dambe.bio.uottawa.ca/dambe.asp";

4- Has evidence of possible recombination in your dataset, the evaluate if this presence or absence, because this may to influence the grouping of clades, I perform with

---recombination

4.1- Phi-test, implemented in SplitTree4"http://www.splitstree.org", (.nex file)

4.2- GARD deployed in webserver in the DataMonkey "http://www.datamonkey.org/" - turning to the amino acid seaview -> view proteins -> save as ...) Ideally do a tree-based groups.

4.3- RDP4 for download and installation on Windows in "http://web.cbio.uct.ac.za/~darren/rdp.html"

4.4- Hyphy (Mac, Windows, Linux) in "http://hyphy.org/w/index.php/Download"

4.5- Path-o-Gen (temporal structure of a tree input file -> arquivo.tre)

These steps above, I call of pre-processing to inferences phylogenetic...

5- Perform phylogenetic tree, used Bayesian Inference with Molecular Clock, but is necessary Clock Testing:

- This step is performed with program Beast (Beauti, Beast and TreeAnnotator), and Tracer_v1.5 more FigTree to inspection.

- Tutorials: http://beast.bio.ed.ac.uk/tutorials

- Downloads: http://beast.bio.ed.ac.uk/downloads

AMStat: display statistics of large sequence files from next generation sequencing projects

Neel — Fri, 09 Nov 2018 13:34:56 -0600

SAMStat is an efficient C program to quickly display statistics of large sequence files from next generation sequencing projects. When applied to SAM/BAM files all statistics are reported for unmapped, poorly and accurately mapped reads separately. This allows for identification of a variety of problems, such as remaining linker and adaptor sequences, causing poor mapping. Apart from this SAMStat can be used to verify individual processing steps in large analysis pipelines.

Address of the bookmark: http://samstat.sourceforge.net/

MSAProbs - Parallel and accurate multiple sequence alignment

Neel — Tue, 09 Jul 2019 23:58:44 -0500

MSAProbs is a well-established state-of-the-art multiple sequence alignment algorithm for protein sequences. The design of MSAProbs is based on a combination of pair hidden Markov models and partition functions to calculate posterior probabilities. Assessed using the popular benchmarks: BAliBASE, PREFAB, SABmark and OXBENCH, MSAProbs achieves statistically significant accuracy improvements over the existing top performing aligners, including ClustalW, MAFFT, MUSCLE, ProbCons and Probalign. In addition, MSAProbs is optimized for shared-memory CPUs by employing a multi-threaded design, and further parallelized for distributed-memory systems using MPI to overcome high memory overhead barrier and achieve good parallel and data-size scalability.

Address of the bookmark: http://msaprobs.sourceforge.net/homepage.htm#latest

Kalign: fast multiple sequence alignment program for biological sequences.

BioStar — Fri, 01 Nov 2019 00:20:41 -0500

Kalign is a fast multiple sequence alignment program for biological sequences.

Align sequences and output the alignment in MSF format:

kalign -i BB11001.tfa -f msf  -o out.msf

Align sequences and output the alignment in clustal format:

kalign -i BB11001.tfa -f clu -o out.clu

Re-align sequences in an existing alignment:

kalign -i BB11001.msf  -o out.afa

Reformat existing alignment:

kalign -i BB11001.msf -r afa -o out.afa

Address of the bookmark: https://github.com/TimoLassmann/kalign

AccessSyRI: finding genomic rearrangements and local sequence differences from whole-genome assemblies

Jit — Sat, 01 Feb 2020 13:38:49 -0600

AccessSyRI: finding genomic rearrangements andlocal sequence differences from whole-genome assemblies

SyRI, a pairwise whole-genome comparison tool for chromosome-level assemblies. SyRI starts by finding rearranged regions and then searches for differences in the sequences, which are distinguished for residing in syntenic or rearranged regions. This distinction is important as rearranged regions are inherited differently compared to syntenic regions.

https://genomebiology.biomedcentral.com/articles/10.1186/s13059-019-1911-0

Address of the bookmark: https://github.com/schneebergerlab/syri

Submit your SARS-CoV-2 sequence data to GenBank

Neel — Thu, 09 Apr 2020 18:28:25 -0500

Submit your SARS-CoV-2 sequence data to GenBank and SRA with our new submission landing page. Submission is simple and streamlined *and* there’s a rapid turnaround. https://submit.ncbi.nlm.nih.gov/sarscov2/

Quickly and easily add your SARS-CoV-2 sequence data to the growing public archive with new, special features and support from NCBI. new SARS-CoV-2 sequence submission landing page will help you get started. GenBank submissions are accessioned and released in approximately 1-2 working days, and Sequence Read Archive (SRA) submissions typically processed and released within hours. Submission is simple!

More information is available on NCBI Insights. https://ncbiinsights.ncbi.nlm.nih.gov/2020/04/09/sars-cov2-data-streamlined-submission-rapid-turnaround/

LoReTTA, a user-friendly tool for assembling viral genomes from PacBio sequence data

Neel — Wed, 23 Jun 2021 07:54:53 -0500

LoReTTA (Long Read Template-Targeted Assembler), a tool designed for performing de novo assembly of long reads generated from viral genomes on the PacBio platform. LoReTTA exploits a reference genome to guide the assembly process, an approach that has been successful with short reads.

https://academic.oup.com/ve/article/7/1/veab042/6248116

Address of the bookmark: https://academic.oup.com/ve/article/7/1/veab042/6248116

ContigExtender: a new approach to improving de novo sequence assembly for viral metagenomics data

LEGE — Wed, 08 May 2024 07:32:45 -0500

ContigExtender, was developed to extend contigs, complementing de novo assembly. ContigExtender employs a novel recursive Overlap Layout Candidates (r-OLC) strategy that explores multiple extending paths to achieve longer and highly accurate contigs. ContigExtender is effective for extending contigs significantly in in silico synthesized and real metagenomics datasets.

More at https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7953547/

Address of the bookmark: https://github.com/dengzac/contig-extender

Seal: SEquence ALignment evaluation suite

Jit — Wed, 03 Jan 2018 05:05:46 -0600

Seal is a comprehensive sequencing simulation and alignment tool evaluation suite. This software (implemented in Java) provides several utilities that can be used to evaluate alignment algorithms, including:

Reading a pre-existing reference genome from one or more FASTA files.
Alternatively, generating an artificial reference genome based on input parameters (length, repeat count, repeat length, repeat variability rate).
Simulating reads from random locations in the genome based on input parameters of read length, coverage, sequencing error rate, and indel rate.
Applying alignment tools to the genome and the reads through a standardized interface.
Parsing the output of the alignment tool and calculating the number of reads that were correctly or incorrectly mapped.
Computing run times and measures of accuracy.

Seal has interfaces to evaluate the following software packages:

Bowtie
BWA
MAQ
mrFAST
mrsFAST
Novoalign
SHRiMP
SOAPv2

Address of the bookmark: http://compbio.case.edu/seal/

FERMI

Jit — Fri, 09 Sep 2016 05:37:13 -0500

Fermi is a de novo assembler with a particular focus on assembling Illumina short sequence reads from a mammal-sized genome. In addition to the role of a typical assembler, fermi also aims to preserve heterozygotes which are often collapsed by other assemblers. Its ultimate goal is to find a minimal set of
unitigs to represent all the information in raw reads.

Fermi follows the overlap-layout-consensus paradigm and uses the FM-DNA-index (FMD-index) as the key data structure. It is inspired by the string graph assembler (Simpson and Durbin, 2010 and 2012) and has a similar workflow.

As a typical de novo assembler, fermi tends to produce contigs with slightly longer N50. However, the major weakness of fermi is the high misassembly rate. Although fermi provides a tool to fix misassemblies by using paired-end reads to achieve an accuracy comparable to other assemblers, this is not a favorable solution.

Fermi is designed to be used on a multi-core Linux machine with large shared memory. The easiest way to run fermi is to use the run-fermi.pl script. It generates a Makefile. The actual assembly is done by invoking make. Premature assembly processes can be resumed. Here is an example:

run-fermi.pl -dAPe ./fermi -p NA12878 -t16 -f18 reads*.fq.gz > NA12878.mak
make -f NA12878.mak -j16

Address of the bookmark: https://github.com/lh3/fermi