BOL: Related items

Tbl2asn: a command-line program that automates the creation of sequence records for submission to GenBank

Poonam Mahapatra — Mon, 29 May 2017 07:37:08 -0500

Tbl2asn is a command-line program that automates the creation of sequence records for submission to GenBank. It uses many of the same functions as Sequin but is driven generally by data files. Tbl2asn generates .sqn files for submission to GenBank. Additional manual editing is not required before submission.

Tbl2asn is available by anonymous FTP. Copy the right version for your platform, then uncompress the file, rename it to "tbl2asn", and set the permissions, as necessary for the platform.

Address of the bookmark: https://www.ncbi.nlm.nih.gov/genbank/tbl2asn2/

Alignment-free sequence comparison tools available for next-generation sequencing data analysis

Abhimanyu Singh — Tue, 07 Nov 2017 05:33:33 -0600

kallisto

Transcript abundance quantification from RNA-seq data (uses pseudoalignment for rapid determination of read compatibility with targets)

Software (C++)

https://pachterlab.github.io/kallisto/

Sailfish

Estimation of isoform abundances from reference sequences and RNA-seq data (k-mer based)

Software (C++)

http://www.cs.cmu.edu/~ckingsf/software/sailfish/

Salmon

Quantification of the expression of transcripts using RNA-seq data (uses k-mers)

https://combine-lab.github.io/salmon/

RNA-Skim

RNA-seq quantification at transcript-level (partitions the transcriptome into disjoint transcript clusters; uses sig-mers, a special type of k-mers)

Software (C++)

http://www.csbio.unc.edu/rs/

Variant calling

ChimeRScope

Fusion transcript prediction using gene k-mers profiles of the RNA-seq paired-end reads

Software (Java)

https://github.com/ChimeRScope/ChimeRScope/wiki

FastGT

Genotyping of known SNV/SNP variants directly from raw NGS sequence reads by counting unique k-mers

Software (C)

https://github.com/bioinfo-ut/GenomeTester4/

Phy-Mer

Reference-independent mitochondrial haplogroup classifier from NGS data (k-mer based)

Software (Python)

https://github.com/danielnavarrogomez/phy-mer

LAVA

Genotyping of known SNPs (dbSNP and Affymetrix's Genome-Wide Human SNP Array) from raw NGS reads (k-mer based)

Software (C)

http://lava.csail.mit.edu/

MICADo

Detection of mutations in targeted third-generation NGS data (can distinguish patients’ specific mutations; algorithm uses k-mers and is based on colored de Bruijn graphs)

Software (Python)

http://github.com/cbib/MICADo

General mapper

Minimap

Lightweight and fast read mapper and read overlap detector (uses the concept of “minimazers”, a special type of k-mers)

Software (C)

https://github.com/lh3/minimap

Assembly

De novo genome assembly

MHAP

Produces highly continuous assembly (fully resolved chromosome arms) from third-generation long and noisy reads (10 kbp) using a dimensionality reduction technique MinHash

Software (Java)

https://github.com/marbl/MHAP

Miniasm

Assembler of long noisy reads (SMRT, ONT) using the Overlap-Layout Consensus (OLC) approach without the necessity of an error correction stage (uses minimap)

Software (C)

https://github.com/lh3/miniasm

LINKS

Scaffolding genome assembly with error-containing long sequence (e.g., ONT or PacBio reads, draft genomes)

Software (Perl)

https://github.com/warrenlr/LINKS/

Read clustering

afcluster

Clustering of reads from different genes and different species based on k-mer counts

Software (C++)

https://github.com/luscinius/afcluster

QCluster

Clustering of reads with alignment-free measures (k-mer based) and quality values

Software (C++)

http://www.dei.unipd.it/~ciompin/main/qcluster.html

Reads error correction

Lighter

Correction of sequencing errors in raw, whole genome sequencing reads (k-mer based)

Software (C++)

https://github.com/mourisl/Lighter

QuorUM

Error corrector for Illumina reads using k-mers

Software (C++)

https://github.com/gmarcais/Quorum

Trowel

Software (C++)

https://sourceforge.net/projects/trowel-ec/

Metagenomics

Assembly-free phylogenomics

AAF

Phylogeny reconstruction directly from unassembled raw sequence data from whole genome sequencing projects; provides bootstrap support to assess uncertainty in the tree topology (k-mer based)

Software (Python)

https://github.com/fanhuan/AAF

kSNP v3

Reference-free SNP identification and estimation of phylogenetic trees using SNPs (based on k-mer analysis)

Software (C)

https://sourceforge.net/projects/ksnp/files/

NGS-MC

Phylogeny of species based on NGS reads using alignment-free sequence dissimilarity measures d2* and d2 S under different Markov chain models (using k-words)

R package

http://www-rcf.usc.edu/~fsun/Programs/NGS-MC/NGS-MC.html

Species identification/taxonomic profiling

CLARK

Taxonomic classification of metagenomic reads to known bacterial genomes using k-mer search and LCA assignment

Software (C++)

http://clark.cs.ucr.edu/

FOCUS

Reports organisms present in metagenomic samples and profiles their abundances (uses composition-based approach and non-negative least squares for prediction)

Web service Software (Python)

http://edwards.sdsu.edu/FOCUS/

GSM

Estimation of abundances of microbial genomes in metagenomic samples (k-mer based)

Software (Go)

https://github.com/pdtrang/GSM

Mash

Species identification using assembled or unassembled Illumina, PacBio, and ONT data (based on MinHash dimensionality-reduction technique)

Software (C++)

https://github.com/marbl/mash

Kraken

Taxonomic assignment in metagenome analysis by exact k-mer search; LCA assignment of short reads based on a comprehensive sequence database

Software (C++)

https://ccb.jhu.edu/software/kraken/

LMAT

Assignment of taxonomic labels to reads by k-mers searches in precomputed database

Software (C++/Python)

https://sourceforge.net/projects/lmat/

stringMLST

k-mer-based tool for MLST directly from the genome sequencing reads

Software (Python)

http://jordan.biology.gatech.edu/page/software/stringMLST

Taxonomer

k-mer-based ultrafast metagenomics tool for assigning taxonomy to sequencing reads from clinical and environmental samples

Web service

http://taxonomer.iobio.io/

Other

d2-tools

Word-based (k-tuple) comparison (pairwise dissimilarity matrix using d2S measure) of metatranscriptomic samples from NGS reads

Software (Python/R)

https://code.google.com/p/d2-tools/

VirHostMatcher

Prediction of hosts from metagenomic viral sequences based on ONF using various distance measures (e.g., d2)

Software (C++)

https://github.com/jessieren/VirHostMatcher

MetaFast

Statistics calculation of metagenome sequences and the distances between them based on assembly using de Bruijn graphs and Bray–Curtis dissimilarity measure

Software (Java)

https://github.com/ctlab/metafast

NanoSim: nanopore sequence read simulator based on statistical characterization.

Jit — Mon, 18 Dec 2017 04:16:31 -0600

NanoSim, a fast and scalable read simulator that captures the technology-specific features of ONT data and allows for adjustments upon improvement of nanopore sequencing technology. The first step of NanoSim is read characterization, which provides a comprehensive alignment-based analysis and generates a set of read profiles serving as the input to the next step, the simulation stage. The simulation stage uses the model built in the previous step to produce in silico reads for a given reference genome. NanoSim is written in Python and R. The source files and manual are available at the Genome Sciences Centre website: http://www.bcgsc.ca/platform/bioinfo/software/nanosim

https://github.com/bcgsc/NanoSim

Address of the bookmark: http://www.bcgsc.ca/platform/bioinfo/software/nanosim

Breakpointer: using local mapping artifacts to support sequence breakpoint discovery from single-end reads

Jit — Tue, 12 Jun 2018 12:41:10 -0500

Breakpointer is a fast tool for locating sequence breakpoints from the alignment of single end reads (SE) produced by next generation sequencing (NGS). It adopts a heuristic method in searching for local mapping signatures created by insertion/deletions (indels) or more complex structural variants(SVs).

Address of the bookmark: https://github.com/ruping/Breakpointer

Genome sequence-based (sub-)species delineation.

Abhimanyu Singh — Wed, 12 Dec 2018 08:31:14 -0600

The GGDC web service reports digital DDH for a universal and accurate delineation of prokaryotic (sub-)species without inheriting the pitfalls of classic DDH, and also calculates differences in genomic G+C content.

http://ggdc.dsmz.de/ggdc_background.php#

Genome-to-Genome Distance Calculator 2.1

http://ggdc.dsmz.de/ggdc.php

Address of the bookmark: http://ggdc.dsmz.de/

TRITEX sequence assembly pipeline for Triticeae genomes

Jit — Tue, 20 Aug 2019 09:47:14 -0500

The pipeline is open-source and hosted in a public Bitbucket repository.

TRITEX has been run on highly inbred genotypes of barley (Hordeum vulgare), tetraploid wheat (Triticum turgidum) and hexaploid wheat (T. aestivum) with reasonable results: super-scaffold N50 values in the range of dozens of Mb and pseudomolecules with better gene space representation than a BAC-by-BAC assembly. It has never been tested and is not expected to work on heterozygous or autopolyploid genomes.

A protocol for generating chromosome-conformation capture sequencing (Hi-C) data suitable for use with the pipeline is described in Himmelbach et al. 2018. Refer to the technical notes of 10X Genomics on how to generate Chromium data.

Address of the bookmark: https://tritexassembly.bitbucket.io/

Shouji: a fast and efficient pre-alignment filter for sequence alignment

Jit — Mon, 04 Nov 2019 07:09:45 -0600

The ability to generate massive amounts of sequencing data continues to overwhelm the processing capacity of existing algorithms and compute infrastructures. In this work, we explore the use of hardware/software co-design and hardware acceleration to significantly reduce the execution time of short sequence alignment, a crucial step in analyzing sequenced genomes.

We introduce Shouji, a highly parallel and accurate pre-alignment filter that remarkably reduces the need for computationally-costly dynamic programming algorithms. The first key idea of our proposed pre-alignment filter is to provide high filtering accuracy by correctly detecting all common subsequences shared between two given sequences. The second key idea is to design a hardware accelerator design that adopts modern FPGA (field-programmable gate array) architectures to further boost the performance of our algorithm.

More at https://github.com/CMU-SAFARI/Shouji

Address of the bookmark: https://github.com/CMU-SAFARI/Shouji

CLARK: Fast, accurate and versatile sequence classification system

Jit — Sat, 15 Feb 2020 01:49:01 -0600

CLARK, a method based on a supervised sequence classification using discriminative k-mers. Considering two distinct specific classification problems (see the article for details), namely (1) the taxonomic classification of metagenomic reads to known bacterial genomes, and (2) the assignment of BAC clones and transcript to chromosome arms/centromeres (in the absence of a finished assembly for the reference genome), CLARK outperforms in classification speed and precision the best state-of-the-art methods.

http://clark.cs.ucr.edu/Spaced/

Address of the bookmark: http://clark.cs.ucr.edu/Spaced/

flexidot: Highly customizable, ambiguity-aware dotplots for visual sequence analyses

Jit — Fri, 24 Apr 2020 08:39:28 -0500

FlexiDot is a cross-platform dotplot suite generating high quality self, pairwise and all-against-all visualizations. To improve dotplot suitability for comparison of consensus and error-prone sequences, FlexiDot harbors routines for strict and relaxed handling of mismatches and ambiguous residues. The custom shading modules facilitate dotplot interpretation and motif identification by adding information on sequence annotations and sequence similarities to the images. Combined with collage-like outputs, FlexiDot supports simultaneous visual screening of a large sequence sets, allowing dotplot use for routine screening.

Address of the bookmark: https://github.com/molbio-dresden/flexidot

Kmer: a suite of tools for DNA sequence analysis

BioStar — Wed, 18 Aug 2021 00:02:54 -0500

More at https://help.rc.ufl.edu/doc/Kmer

This also includes:

A2Amapper: ATAC, Assembly to Assembly Comparision tool:
- Comparative mapping between two genome assemblies (same species), or between two different genomes (cross species).

Sim4db:
- Spliced alignment of cDNA and genomic sequences, from the same (sim4) or related (sim4cc) species. Optimized for high-throughput batched alignment.

LEAFF:
- LEAFF (ahem, Let's Extract Anything From Fasta) is a utility program for working with multi-fasta files. In addition to providing random access to the base level, it includes several analysis functions.

Meryl:
- An out-of-core k-mer counter. The amount of sequence that can be processed for any size k depends only on the amount of free disk space.

Address of the bookmark: https://help.rc.ufl.edu/doc/Kmer