BOL: Related items

minialign: fast and accurate alignment tool for PacBio and Nanopore long reads

Jit — Thu, 24 May 2018 08:33:26 -0500

Minialign is a little bit fast and moderately accurate nucleotide sequence alignment tool designed for PacBio and Nanopore long reads. It is built on three key algorithms, minimizer-based index of the minimap overlapper, array-based seed chaining, and SIMD-parallel Smith-Waterman-Gotoh extension.

Address of the bookmark: https://github.com/ocxtal/minialign

LoRMA: A tool for correcting sequencing errors in long reads

Abhimanyu Singh — Thu, 06 Sep 2018 16:21:01 -0500

An error correction method that uses long reads only. The method consists of two phases: first, we use an iterative alignment-free correction method based on de Bruijn graphs with increasing length of k-mers, and second, the corrected reads are further polished using long-distance dependencies that are found using multiple alignments. According to our experiments, the proposed method is the most accurate one relying on long reads only for read sets with high coverage. Furthermore, when the coverage of the read set is at least 75×, the throughput of the new method is at least 20% higher.

conda install -c atgc-montpellier lorma

Address of the bookmark: https://gite.lirmm.fr/lorma/lorma-releases/wikis/home

Pacasus: Correction of palindromes in long reads from PacBio and Nanopore

BioStar — Mon, 12 Nov 2018 05:26:48 -0600

Tool for detecting and cleaning PacBio / Nanopore long reads after whole genome amplification. Check the poster from the Revolutionizing Next-Generation Sequencing (2nd edition) conference in the source folder: https://github.com/swarris/Pacasus/blob/master/vib2017.pdf.

The prepint version is found on http://www.biorxiv.org/content/early/2017/08/09/173872

It uses the pyPaSWAS framework for sequence alignment (https://github.com/swarris/pyPaSWAS)

Address of the bookmark: https://github.com/swarris/Pacasus

HairSplitter: assembling long reads in an unknown number of haplotypes

BioStar — Wed, 07 Dec 2022 00:13:40 -0600

Pros and cons of HairSplitter Limitations of HairSplitter:

Not very fast: it re-polishes the whole assembly

Limited in the number of haplotypes

Strengths of HairSplitter:

Very modular, can be used with any assembler

Naive: makes no assumption on ploidy, parameter-free

Safe: won’t artificially duplicate contigs

HairSplitter splits collapsed assemblies from “draft” assemblies obtained by any means

HairSplitter can recover haplotypes and distinguish repeated elements

Only needs sequencing reads, potentially error-prone

HairSplitter splits collapsed assemblies from “draft” assemblies obtained by any means

HairSplitter can recover haplotypes and distinguish repeated elements

Only needs sequencing reads, potentially error-prone

Not really available yet (github.com/RolandFaure/HairSplitter)

https://hal.archives-ouvertes.fr/hal-03864075/file/RolandFaure_presentation_SeqBIM_2022.pdf

Address of the bookmark: https://hal.archives-ouvertes.fr/hal-03817928/document

Jabba: Hybrid Error Correction for Long Sequencing Reads

Jit — Fri, 05 Jan 2018 03:58:14 -0600

Jabba is a hybrid error correction tool to correct third generation (PacBio / ONT) sequencing data, using second generation (Illumina) data.

Input

Jabba takes as input a concatenated de Bruijn graph and a set of sequences:

the de Bruijn graph should appear in fasta format with 1 entry per node, the meta information should be in the format:
>NODE
the set of sequences should be in fasta or fastq format. These sequences will be corrected (e.g. PacBio reads). The corrections will be written to a file Jabba fasta.
The output is a file in fasta format with corrections of the long reads, and additionally a file in the input format containing uncorrected reads.

https://github.com/biointec/jabba/wiki

https://almob.biomedcentral.com/articles/10.1186/s13015-016-0075-7

Address of the bookmark: https://github.com/biointec/jabba

Porechop: tool for finding and removing adapters from Oxford Nanopore reads

Rahul Nayak — Tue, 29 May 2018 07:33:44 -0500

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

Address of the bookmark: https://github.com/rrwick/Porechop

QuasR: Quantification and annotation of short reads in R

Neel — Fri, 13 Aug 2021 07:44:05 -0500

The QuasR package (short for Quantify and annotate short reads in R) integrates the functionality of several R packages (such as IRanges (Lawrence et al. 2013) and Rsamtools) and external software (e.g. bowtie, through the Rbowtie package, and HISAT2, through the Rhisat2 package). The package aims to cover the whole analysis workflow of typical high throughput sequencing experiments, starting from the raw sequence reads, over pre-processing and alignment, up to quantification. A single R script can contain all steps of a complete analysis, making it simple to document, reproduce or share the workflow containing all relevant details.

Address of the bookmark: https://www.bioconductor.org/packages/devel/bioc/vignettes/QuasR/inst/doc/QuasR.html

KisSplice

Jit — Tue, 16 Aug 2016 08:34:19 -0500

KisSplice is a software that enables to analyse RNA-seq data with or without a reference genome. It is an exact local transcriptome assembler that allows to identify SNPs, indels and alternative splicing events. It can deal with an arbitrary number of biological conditions, and will quantify each variant in each condition. It has been tested on Illumina datasets of up to 1G reads. Its memory consumption is around 5Gb for 100M reads.

KisSplice is not a full-length transcriptome assembler. This means that it will output the variable regions of the transcripts, not reconstruct them entirely.

KisSplice comes as a workflow, with several possible post-treatments meant to facilitate the analysis of the results. The choice of the post-treatment depends on the availability of a reference genome/transcriptome and on the need to perform a differential analysis, as summarised in the following table.

Address of the bookmark: http://kissplice.prabi.fr/

YASRA: Reference based assembler

Abhimanyu Singh — Wed, 01 Mar 2017 08:32:45 -0600

YASRA (Yet Another Short Read Assembler) performs comparative assembly of short reads using a reference genome, which can differ substantially from the genome being sequenced. Mapping reads to reference genomes makes use of LASTZ (Harris et al), a pairwise sequence aligner compatible with BLASTZ. Special scoring sets were derived to improve the performance, both in runtime and quality for 454 and Illumina sequence reads.

YASRA uses LASTZ (http://bx.psu.edu/miller_lab for released version and http://www.bx.psu.edu/~rsharris/lastz/newer for newer version) for aligning the sequences to the reference genome. Please install LASTZ (the newest version on http://www.bx.psu.edu/~rsharris/lastz/newer) and add the LASTZ binary in your executable/binary search path before installing YASRA.

Address of the bookmark: https://github.com/aakrosh/YASRA

Tadpole: an assembler, error-corrector, and read-extender

BioStar — Tue, 04 Feb 2020 23:35:40 -0600

Tadpole is a kmer-based assembler, with additional capabilities of error-correcting and extending reads. It does not do any complicated graph analysis or scaffolding, and therefore, is not particularly good for diploid organisms. Tadpole is very conservative and optimized for correctness rather than length; which is to say, it stops at every branch, and condenses every repeat. Also, it does not currently do scaffolding.

To error-correct reads:
tadpole.sh in=reads.fq out=corrected.fq mode=correct

To extend reads by 50bp in each direction:
tadpole.sh in=reads.fq out=extended.fq mode=extend el=50 er=50

To error-correct and extend at the same time, using a kmer length of 62:
tadpole.sh in=reads.fq out=extended.fq mode=extend el=50 er=50 k=62 ecc=t

More at http://seqanswers.com/forums/showthread.php?t=61445

Address of the bookmark: https://jgi.doe.gov/data-and-tools/bbtools/bb-tools-user-guide/tadpole-guide/