TMAP is a fast and accurate alignment software for short and long nucleotide sequences produced by next-generation sequencing technologies.

• The latest TMAP is unsupported. To use a supported version, please see the TMAP version associated with a Torrent Suite release below.

• Get the latest source code:

  git clone git://github.com/iontorrent/TMAP.git
   cd TMAP
   git submodule init
   git submodule update

https://github.com/iontorrent/TS/tree/master/Analysis/TMAP

Address of the bookmark: https://github.com/iontorrent/TS/tree/master/Analysis/TMAP

Study of 10 tools on five datasets that such a comparative evaluation of these tools is hindered by two types of circularity: they arise due to (1) the same variants or (2) different variants from the same protein occurring both in the datasets used for training and for evaluation of these tools, which may lead to overly optimistic results. Comparative evaluations of predictors that do not address these types of circularity may erroneously conclude that circularity confounded tools are most accurate among all tools, and may even outperform optimized combinations of tools.

Following tools are useful for mis sense muation detection ... 

PolyPhen‐2 (PP2)
“Predicts possible impact of an amino acid substitution on the structure and function of a human protein using straightforward physical and comparative considerations”

MutationTaster‐2 (MT2)
“Evaluation of the disease‐causing potential of DNA sequence alterations”

MutationAssessor (MASS)
“Predicts the functional impact of amino acid substitutions in proteins, such as mutations discovered in cancer or missense polymorphisms”

LRT
“Identify a subset of deleterious mutations that disrupt highly conserved amino acids within protein‐coding sequences, which are likely to be unconditionally deleterious”

SIFT
“Predicts whether an amino acid substitution affects protein function”

GERP++
“Identifies constrained elements in multiple alignments by quantifying substitution deficits. These deficits represent substitutions that would have occurred if the element were neutral DNA, but did not occur because the element has been under functional constraint. We refer to these deficits as “rejected substitutions.” Rejected substitutions are a natural measure of constraint that reflects the strength of past purifying selection on the element”

phyloP
“Compute conservation or acceleration P values based on an alignment and a model of neutral evolution”

FatHMM unweighted (FatHMM‐U)
Predicts “functional consequences of both coding variants, that is, nonsynonymous single‐nucleotide variants, and noncoding variants”

FatHMM weighted (FatHMM‐W)
Predicts “functional consequences of both coding variants, that is, nonsynonymous single‐nucleotide variants, and noncoding variants” and its weighting scheme attributes higher tolerance scores to SNVs in proteins, related proteins, or domains that already include a high fraction of pathogenic variantsh

Combined Annotation Dependent Depletion (CADD)
“CADD is a tool for scoring the deleteriousness of single‐nucleotide variants as well as insertion/deletions variants in the human genome”

3D-Dock Suite

Global rigid search: FFTShape complementarity and electrostatics

Re-scoring and clustering. Refinement of interface side-chains

3D-Garden

Global rigid search in ensamble

Shape complementarity and Lennard–Jones potential

Side chain and backbone dihedral refinement

DOT

Global rigid search: FFTShape complementarity, electrostatics and VDWNone

Escher NG

Global rigid searchShape complementarity, hydrogen bonds and electrostatic

Integrated in VEGA

GRAMM 

Global rigid search: FFT. smooth protein surface representation for soft docking

Shape complementarity and Lennard-Jones potential

Clustering of conformations

GRAMM-X 

Global rigid search: FFT. smooth protein surface representation for soft docking

Shape complementarity and Lennard-Jones potentialminimization and re-scoring with multiple filters

HEX

Global rigid search: Fourier correlation of spherical harmonics

Shape complementarity

HADDOCK

Global rigid searchElectrostatic ,VDW and desolvation energy termsMD simulated annealing refinement . Filtering based on external data. 

ICM

Global rigid search: Monte CarloEmpirical scoring function

Clustering and selection of conformations. Refinement of interface side-chains and re-scoring

MolFit 

Global rigid search: FFTShape complementarity

Clustering of good solutions, filtering using a priori information and small, local rigid rotations around selected conformations

PatchDock

Global rigid searchShape complementarity and atomic desolvation energy

Clustering of conformations

PyDock

Global rigid search:FFTShape complementarity

rescoring by binding electrostatics and desolvation energy

RosettaDock

Local rigid search: Monte Carlo with low and high resolution structure representation levels

Different scoring parameters for the different resolutions 

ZDOCK

Global rigid search: FFTShape complementarity, desolvation energy, and electrostatics.

Energy minimization and re-scoringFree for academics

Point to note:

The proper treatment of flexibility in protein–protein docking is still an active field of research. You first should analyzed your proteins in order to define their conformational space and then choose the most suitable method for your docking problem.

The mmgenome R package also facilitates effortless integration with additional data sources and hence should not be seen as "yet another binning method", but rather a package to integrate different binning strategies.

All functions in the mmgenome R package has associated documentation, check it out in R by e.g. ?mmplot.

Address of the bookmark: https://github.com/MadsAlbertsen/mmgenome

CPAT - https://github.com/liguowang/cpat, http://lilab.research.bcm.edu/ (web server)

CPC2 - https://github.com/gao-lab/CPC2_standalone, http://cpc2.gao-lab.org/ (web server)

Infernal - http://eddylab.org/infernal/, https://github.com/EddyRivasLab/infernal

NCBI RefSeq - https://www.ncbi.nlm.nih.gov/refseq/

Rfam - http://rfam.xfam.org/, https://docs.rfam.org/en/latest/index.html

SILVA - https://www.arb-silva.de/

RNAmmer - http://www.cbs.dtu.dk/services/RNAmmer/ (web server, standalone download link)

1. RNA-Seq Analysis Pipelines

RNA-seq is one of the most popular techniques for studying RNA. These tools streamline processing raw sequence data:

• FASTQC: For quality control of raw RNA-seq reads.
• Trimmomatic: For trimming and filtering RNA-seq reads.
• HISAT2/STAR: High-performance aligners for RNA-seq reads.
• FeatureCounts: For quantifying gene expression.
• DESeq2/EdgeR: For differential expression analysis.

2. Transcriptome Assembly and Annotation

For analyzing transcriptomes from non-model organisms or assembling novel transcripts:

• Trinity: For de novo transcriptome assembly.
• StringTie: For transcript assembly and quantification from RNA-seq alignments.
• TransDecoder: To predict coding regions within assembled transcripts.
• TAU: Tools for annotating non-coding and coding RNAs.

3. Exploring Non-Coding RNA (ncRNA)

Non-coding RNAs play critical regulatory roles. Dedicated tools for studying them include:

• Infernal: For identifying ncRNA sequences based on covariance models.
• Rfam: Database and tools for ncRNA families.
• miRDeep: For identifying microRNAs in RNA-seq datasets.

4. RNA Structure and Motif Analysis

Structural biology of RNA helps in understanding its function:

• RNAfold (ViennaRNA): Predicts secondary structures from RNA sequences.
• RNAstructure: Tools for RNA secondary structure prediction and analysis.
• MEME Suite: For identifying motifs in RNA sequences.
• IntaRNA: For RNA-RNA interaction prediction.

5. RNA Editing and Modifications

Epitranscriptomics is a growing field focusing on RNA modifications:

• REDItools: For RNA editing analysis.
• m6Aboost: For identifying m6A modifications in RNA.

6. Long-Read RNA Sequencing Analysis

Long-read technologies like Nanopore and PacBio are transforming RNA research:

• FLAIR: For isoform-level analysis of long-read RNA-seq data.
• NanoMod: For detecting modifications in RNA from Nanopore sequencing.

7. RNA-Protein Interactions

To study RNA-protein interactions and complexes:

• RBPmap: For identifying RNA-binding protein motifs.
• PARalyzer: For analyzing PAR-CLIP data.

8. Functional Enrichment Analysis

Understanding biological functions and pathways from RNA-seq data:

• getENRICH: A tool designed for pathway enrichment analysis of non-model organisms (hypergeometric P-value calculation with FDR correction).
• ClusterProfiler: For GO and KEGG pathway enrichment analysis.

9. Visualization and Data Sharing

Presenting and sharing RNA sequence analysis results effectively:

• IGV: Genome browser for visualizing RNA-seq alignments.
• Circos: Circular visualization of RNA-seq data.
• DashBio: A Python library for creating bioinformatics visualizations.

Conclusion

The bioinformatics landscape for RNA sequence analysis is vast, with tools catering to specific needs. Whether you’re studying coding RNAs, non-coding RNAs, or exploring RNA-protein interactions, the right tools can transform your data into biological insights.

• Bioconductor – A plethora of tools for analysis and comprehension of high-throughput genomic data, including 1500+ software packages. [ paper-2004 | web ]
• Biopython – Freely available tools for biological computing in Python, with included cookbook, packaging and thorough documentation. Part of the Open Bioinformatics Foundation. Contains the very useful Entrez package for API access to the NCBI databases. [ paper-2009 | web ]
• Bioconda – A channel for the conda package manager specializing in bioinformatics software. Includes a repository with 3000+ ready-to-install (with conda install) bioinformatics packages. [ paper-2018 | web ]
• BioJulia – Bioinformatics and computational biology infastructure for the Julia programming language. [ web ]
• Rust-Bio – Rust implementations of algorithms and data structures useful for bioinformatics. [ paper-2016 ]
• SeqAn – The modern C++ library for sequence analysis.

List of analysis tools developed for Oxford Nanopore data

BWA
Fast nanopore data tuned alignment tool
https://github.com/lh3/bwa

GraphMap
Mapper for long and error-prone reads
https://github.com/isovic/graphmap

LAST
Nanopore tuned alignment tool
http://last.cbrc.jp/

LINKS
Software tool for long read scaffolding
https://github.com/warrenlr/LINKS/

marginAlign
Tools to align nanopore reads to a reference
https://github.com/benedictpaten/marginAlign

minoTour
Real time analysis tools
http://minotour.nottingham.ac.uk/

nanoCORR
Error-correction tool for nanopore sequence data
https://github.com/jgurtowski/nanocorr

NanoOK
Software for nanopore data, quality and error profiles
https://documentation.tgac.ac.uk/display/NANOOK/NanoOK

Nanopolish
Nanopore analysis and genome assembly software
https://github.com/jts/nanopolish

nanopore
Variant-detection tool for nanopore sequence data
https://github.com/mitenjain/nanopore

Nanocorrect
Error-correction tool for nanopore sequence data
https://github.com/jts/nanocorrect/

npReader
Real-time conversion and analysis of nanopore reads
https://github.com/mdcao/npReader

poRe
Tool for analyzing and visualizing nanopore data
https://sourceforge.net/p/rpore/wiki/Home/

PoreSeq
Error-correction and variant-calling software
https://github.com/tszalay/poreseq

Poretools
Nanopore sequence analysis and visualization software
https://github.com/arq5x/poretools

SSPACE-LongRead
Genome scaffolding tool
http://www.baseclear.com/genomics/bioinformatics/basetools/SSPACE-longread

SMIS
Genome scaffolding tool
https://sourceforge.net/projects/phusion2/files/smis/

List of assemblers for Oxford Nanopore MinION long reads

LQS
DALIGNER, Celera OLC Nanocorrect,
Nanopolish corrector
https://github.com/jts/nanopolish

PBcR
HGAP or BLASR, Celera OLC
PBcR corrector
http://wgs-assembler.sourceforge.net/wiki/index.php/PBcR
–
Canu
MHAP, Celera OLC
Canu corrector
https://github.com/marbl/canu

Falcon
String graph, Celera OLC
Falcon corrector
https://github.com/PacificBiosciences/falcon

Miniasm
OLC
https://github.com/lh3/miniasm

ra-integrate
OLC
https://github.com/mariokostelac/ra-integrate/

ALLPATHS-LG
de Bruijn graph
ALLPATHS-L corrector
https://www.broadinstitute.org/software/allpaths-lg/blog/?page_id=12

SPAdes
de Bruijn graph
SPAdes corrector
http://bioinf.spbau.ru/spades

Take a look at the PRICE software from the DeRisi lab. Its meant to do something very similar. http://derisilab.ucsf.edu/index.php?page=software

You could also look at SSPACE (http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/sspacev12/), ATLAS tools (http://www.hgsc.bcm.tmc.edu/content/bcm-hgsc-software), and SCARPA (http://compbio.cs.toronto.edu/hapsembler/scarpa.html).

See the PAGIT protocol: http://www.sanger.ac.uk/resources/software/pagit/

In particular, take a look at the IMAGE tool: http://genomebiology.com/2010/11/4/R41

Also SOAPdenovo has ha function for scaffolding. Not sure about ABYSS

Here there is a useful explanation of several tools.

https://bioinformaticsonline.com/search?q=scaffolding&entity_type=object&entity_subtype=bookmarks&offset=0&search_type=entities

I could be wrong, but the above answers to your hypothetical scenario appear to miss the point that you aren't interested in assembling the full genome, just the 100 kb part you're interested in. I suggest the following algorithm:

1. Start with the initial assembly C0 of the contigs you have identified as overlapping your region of interest, and the set S of reads those contigs contain. Let C = C0.

2. Repeat:
a. Identify paired-end reads (not in C) for which one or both ends align within, or extending, contigs in C.
b. Identify unpaired reads that align extending these new paired-end reads.
c. Construct a new assembly C' from C and the new reads identified in (a) and (b).
d. Trim C' so it does not extend more than 100 kb to either end of C0. Set C = C'.
e. Let S' denote the reads that contribute to C'. If S' does not contain any reads not present in S, stop. Otherwise, Set S = S'.

3. If you don't have a complete assembly of the region of interest, generate an STS for each end of each contig, probe a library for clones including these STSes, subclone these clones into a paired-end sequencing vector, and generate paired-end reads for this library; then try steps (1) and (2) again, adding these new sequencing reads to what you had before.

4. If your average sequencing depth for the region of interest exceeds 25 or so without filling all gaps, it is likely that the remaining gaps represent sequences that are not getting cloned in your sequencing vectors. Try different sequencing vectors.