BOL: Related items

e-RGA: enhanced Reference Guided Assembly of Complex Genomes

Jit — Mon, 19 Dec 2016 05:56:14 -0600

Next Generation Sequencing has totally changed genomics: we are able to produce huge amounts of data at an incredibly low cost compared to Sanger sequencing. Despite this, some old problems have become even more difficult, de novo assembly being on top of this list. Despite efforts to design tools able to assemble, de novo, an organism sequenced with short reads, the results are still far from those achievable with long reads. In this paper, we propose a novel method that aims to improve de novo assembly in the presence of a closely related reference. The idea is to combine de novo and reference-guided assembly in order to obtain enhanced results.

Address of the bookmark: http://journal.embnet.org/index.php/embnetjournal/article/view/208

EAGER

Jit — Sat, 10 Dec 2016 18:07:23 -0600

The automated reconstruction of genome sequences in ancient genome analysis is a multifaceted process.

EAGER encompasses both state-of-the-art tools for each step as well as new complementary tools tailored for ancient DNA data within a single integrated solution in an easily accessible format.

https://genomebiology.biomedcentral.com/articles/10.1186/s13059-016-0918-z

Address of the bookmark: https://github.com/apeltzer/EAGER-GUI

BIMA V3: an aligner customized for mate pair library sequencing

Abhimanyu Singh — Wed, 14 Dec 2016 15:20:00 -0600

Summary: Mate pair library sequencing is an effective and economical method for detecting genomic structural variants and chromosomal abnormalities. Unfortunately, the mapping and alignment of mate pair read pairs to a reference genome is a challenging and
time consuming process for most NGS alignment programs. Large insert sizes, introduction of library preparation protocol artifacts (biotin junction reads, paired-end read contamination, chimeras, etc.), and presence of structural variant breakpoints within reads increases mapping and alignment complexity. We describe an algorithm that is up to 20 times faster and 25% more accurate than popular NGS alignment programs when processing mate pair sequencing.
Availability: http://bioinformaticstools.mayo.edu/research/bima/
Contact: vasmatzis.george@mayo.edu

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/02/12/bioinformatics.btu078.full.pdf

LAST

Bulbul — Mon, 19 Dec 2016 14:07:53 -0600

LAST can:

Handle big sequence data, e.g:
- Compare two vertebrate genomes
- Align billions of DNA reads to a genome
Indicate the reliability of each aligned column.
Use sequence quality data properly.
Compare DNA to proteins, with frameshifts.
Compare PSSMs to sequences
Calculate the likelihood of chance similarities between random sequences.
Do split and spliced alignment.
Train alignment parameters for unusual kinds of sequence (e.g. nanopore).

Address of the bookmark: http://last.cbrc.jp/

MCscan

Bulbul — Thu, 22 Dec 2016 03:53:58 -0600

MCscan is a computer program that can simultaneously scan multiple genomes to identify homologous chromosomal regions and subsequently align these regions using genes as anchors. This is the toolset for generating the synteny correspondences in Plant Genome Duplication Database. It is intended as an easy-to-use and quick way to identify conserved gene arrays both within the same genome and across different genomes.

More at http://chibba.agtec.uga.edu/duplication/mcscan/

Address of the bookmark: http://chibba.agtec.uga.edu/duplication/mcscan/

sockeye

Jit — Fri, 17 Feb 2017 08:51:16 -0600

This sockeye software uses the Ensembl database project to import sequence and annotation information from several eukaryotic species. A user can additionally import their own custom sequence and annotation data. Individual annotation objects are displayed in Sockeye by using custom 3D models. Ensembl-derived and imported sequences can be analyzed by using a suite of multiple and pair-wise alignment algorithms. The results of these comparative analyses are also displayed in the 3D environment of Sockeye. By using the Java3D API to visualize genomic data in a 3D environment, we are able to compactly display cross-sequence comparisons. This provides the user with a novel platform for visualizing and comparing genomic feature organization.

Address of the bookmark: http://www.bcgsc.ca/platform/bioinfo/software/sockeye/releases/1.3

Pacbio Long Reads Compatible Software and Tools

Archana Malhotra — Wed, 15 Mar 2017 14:19:01 -0500

The following software packages are known to be compatible with PacBio® data, in addition to PacBio's own SMRT® Analysis suite. All packages are believed to be open source or freely available for non-commercial use. See the individual project sites for up-to-date license information. A separate page lists commercial software.

Know of any other open source software for PacBio data? Email us.

Software categories:

Address of the bookmark: https://github.com/PacificBiosciences/DevNet/wiki/Compatible-Software

DBG2OLC:Efficient Assembly of Large Genomes Using Long Erroneous Reads of the Third Generation Sequencing Technologies

Jit — Wed, 19 Apr 2017 10:09:51 -0500

DBG2OLC:Efficient Assembly of Large Genomes Using Long Erroneous Reads of the Third Generation Sequencing Technologies

Our work is published in Scientific Reports:

Ye, C. et al. DBG2OLC: Efficient Assembly of Large Genomes Using Long Erroneous Reads of the Third Generation Sequencing Technologies. Sci. Rep. 6, 31900; doi: 10.1038/srep31900 (2016).

http://www.nature.com/articles/srep31900

The manual can be downloaded from:

https://github.com/yechengxi/DBG2OLC/raw/master/Manual.docx

To use precompiled versions,please go to:

https://github.com/yechengxi/DBG2OLC/tree/master/compiled

Address of the bookmark: https://github.com/yechengxi/DBG2OLC

fragScaff: Genome Assembly with Contiguity Preserving Transposition

Jit — Mon, 14 May 2018 04:28:14 -0500

Contiguity preserving transposition and sequencing (CPT-seq) is an entirely in vitro means of generating libraries comprised of 9216 indexed pools, each of which contains thousands of sparsely sequenced long fragments ranging from 5 kilobases to >1 megabase. This software, fragScaff, leverages coincidences between the content of different pools as a source of contiguity information for scaffolding de novo genome assemblies. FragScaff is complementary to Lachesis, providing midrange contiguity to support robust, accurate chromosome-scale de novo genome assemblies without the need for laborious in vivo cloning steps.

Further information about fragScaff, including source code, is available at:https://sourceforge.net/projects/fragscaff/files.

Manuscript describing fragScaff was published as: Adey A, Kitzman JO, Burton JN, Daza R, Kumar A, Christiansen L, Ronaghi M, Amini S, L Gunderson K, Steemers FJ, Shendure J#. In vitro, long-range sequence information for de novo genome assembly via transposase contiguity. Genome Research 2014 Dec;24(12):2041-9. doi: 10.1101/gr.178319.114. PubMed PMID: 25327137.

Address of the bookmark: https://sourceforge.net/projects/fragscaff/files/

Phased Human Genome Assembly !

Rahul Nayak — Mon, 08 Oct 2018 09:10:54 -0500

The new publicly available assembly (PacBio HG00733) has the fewest gaps of any human genome assembly, with more than half of the genome contained in gapless sequence at least 27 Mb long. The primary contig assembly is 2.89 Gb long and consists of 865 contigs that were assembled with PacBio data generated with the company’s Sequel® System. Using the FALCON-Unzip assembler, maternal and paternal haplotypes were resolved over more than 80% of the genome. Maternal and paternal haplotype blocks were then further phased using Hi-C technology and the FALCON-Phase methoddeveloped in collaboration with Phase Genomics. The genome was then de novo scaffolded using Phase Genomics’ Proximo Hi-C platform, resulting in the first chromosome-scale diploid assembly of a single individual accomplished with only two technologies. More specific details about the assembly are included on the PacBio blog.

The data are available using NCBI accession IDs: BioProject: (PRJNA483067), assembly: [RBJD00000000] and sequence data (SRP155659).

Additional Resources

Interactive map showcasing global initiatives underway to generate reference-quality human genome assemblies for diverse populations
BioReport Podcast on the value of ethnic-specific reference genomes
Nature Reviews Genetics paper from NHGRI: Prioritizing diversity in human genomics research
Article in The Journal of Precision Medicine: “Minority Report – Ethnic Diversity and the Real Promise for Precision Medicine”
Article in Bio-IT World: “Genomic Data Standards Are a Necessity”
NHGRI Project Award: High Quality Human and Non-Human Primate Genome Assemblies

More details are available on the PacBio website:

Blog post: Data Release: Highest-Quality, Most Contiguous Individual Human Genome Assembly to Date
Blog post: For Reference-Grade Human Genome Assemblies, SMRT Sequencing Yields Optimal Results
Webinar: Assembling High-Quality Human Reference Genomes for Global Populations
FALCON-Phase press release and article preprint
PacBio research focus webpage about Human Population Genetics

Ref: https://stockguru.com/2018/10/08/pacific-biosciences-releases-highest-quality-most-contiguous-individual-human-genome-assembly-to-date/