During the first phase of ENCODE, published in 2007, microarray-based technologies were used to detect regions associated with transcription factors, certain histone modifications and open chromatin within a pre-specified 1% of the human genome.

ENCODE’s second phase saw a switch to sequencing-based technologies, the addition of new assay types and the analysis of functional elements genome-wide, described in a collection of research articles in 2012.

The Encyclopedia paper of ENCODE 3, published in Nature, gives an overview of the various assays that were performed in human and mouse cell lines and tissues and describes a Registry of human and mouse candidate cis-regulatory elements (cCREs).

More at https://www.nature.com/immersive/d42859-020-00027-2/index.html

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

• Homology-based misassembly correction
• Homology-based assembly scaffolding and patching
• Scaffold merging

Address of the bookmark: https://github.com/malonge/RagTag

1. SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.

2. ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.

3. Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.

4. SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.

5. MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.

6. Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.

7. Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.

8. SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.

9. SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.

10. Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.

11. Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.

12. wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.

13. Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.

14. Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.

15. CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.

16. Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

The Department of Informatics is a vacant position as a researcher in computer science, related to Computational Biology Unit (CBU), for 3 years.

The position is part of CBU Service Group and will focus on bioinformatic analysis project and especially the analysis of high-throughput data, including NGS (sequencing), and proteomics data.

The successful candidate will be part of the Norwegian bioinformatics platform's national helpdesk within the project ELIXIR.NO

Applicants must hold a PhD in a relevant subject such as computer science, mathematics, molecular biology and also possess expertise and experience in bioinformatics statistics and analysis of data from high-throughput molecular experiment.

Basic programming or scripting skills are required. Experience in Python, R, Perl, Linux-based operating systems and moreover knowledge of databases and web programming will be a strength for applicants.

We expect enthusiasm and independence and moreover the ability to work in an interdisciplinary team environment.

Good knowledge of English is required.

Salaries start at level 57 (code 1109/LR 24.1) by appointment. Further promotion occurs after
service seniority in the position (at grade 57-65). Of particularly highly qualified applicants may be considered a higher salary.

Further information about the position is available from the chair of the CBU,
Professor Inge Jonassen, e-mail: Inge.Jonassen @ ii.uib.no

The successful applicant must comply with the guidelines that apply at any given time the position.

State employment shall as far as possible reflect the diversity of the population. It is therefore an objective to achieve a balanced age and sex composition and the recruitment of persons with immigrant backgrounds. Persons with immigrant background are requested to apply for the position.

Women are particularly encouraged to apply. If the experts find that several applicants have approximately equivalent qualifications, the rules on equal in the Personnel Regulations for Academic Positions will be applied.

University of Bergen applies the principles of public openness when recruiting staff to scientific positions.

Information about the applicant may be made public even though the applicant has requested not to be named in the list of applicants. If the request does not host admitted to the result, the applicant shall be notified of this.

Send application, CV, certificates, diplomas, undergraduate work and a list of publications (list of publications) online by clicking on https://www.jobbnorge.no/jobbsoknet/login.aspx?returnurl=/jobbsoknet/jobapplication.aspx?jobid=95196

You need to upload certified translations into English or a Scandinavian language of appendices, such as diplomas and transcripts.

Applications sent by email to individuals at the institute will not be considered.

Deadline: 9 August 2013

Dated : 22 Nov 2013 -23 Nov 2013

http://www.ngsasia-congress.com/

You can also add your favourite NGS educational material, or workshop tutorial by commenting on this bookmarks for user benefit. 

Understanding the basics of genome sequencing:

Tutorial by Luke Jostins.

http://www.genetic-inference.co.uk/blog/2009/04/basics-sequencing-dna-part-1/

http://www.genetic-inference.co.uk/blog/2009/08/basics-sequencing-dna-part-2/

A window into third-generation sequencing

http://hmg.oxfordjournals.org/content/19/R2/R227.full.pdf

==============================================

NGS data analysis pipelines

• Detecting and annotating genetic variations using the HugeSeq pipeline  DOI: 10.1038/nbt.2134
• NARWHAL, a primary analysis pipeline for NGS data http://bioinformatics.oxfordjournals.org/cgi/content/abstract/28/2/284?etoc
• RseqFlow: Workflows for RNA-Seq data analysis  DOI: 10.1093/bioinformatics/btr441
• ngs_backbone: a pipeline for read cleaning, mapping and SNP calling using Next Generation Sequence  10.1186/1471-2164-12-285
• A framework for variation discovery and genotyping using next-generation DNA sequencing data  PubMed: 21478889
• SNiPlay: a web-based tool for detection, management and analysis of SNPs. Application to grapevine diversity projects  DOI: 10.1186/1471-2105-12-134 Abstract: http://www.biomedcentral.com/1471-2105/12/134/abstract
• WEP: a high-performance analysis pipeline for whole-exome data http://www.biomedcentral.com/1471-2105/14/S7/S11
• DDBJ read annotation pipeline: a cloud computing-based pipeline for high-throughput analysis of next-generation sequencing data. http://www.ncbi.nlm.nih.gov/pubmed/23657089
• GATK: a Toolkit for Genome Analysis http://www.broadinstitute.org/gatk/
• Metagenomics:http://www.nbic.nl/education/nbic-phd-school/course-schedule/ngsmetagenomics/
• RNASeq:http://www.nbic.nl/education/nbic-phd-school/course-schedule/ngsrnaseq/
• Bioinformatics and Seq courses: http://www.isb-sib.ch/training/training-activities-schedule/archive-2013.html
• Variant Detection (Model organism) Advanced tutorial https://docs.google.com/document/pub?id=1CuKkKylVDb03tnN7RSWl5EUzleetn0ctjmvaidPKLxM
• Variant Detection Introductory tutorial https://docs.google.com/document/pub?id=1ZRzrjjOCvtAu3m-IKL-rbJ1f4On60dDL_IEwG7oejdI
• Microbial de novo Assembly for Illumina Data Introductory tutorial https://docs.google.com/document/pub?id=1N3AB9ptISUu4zULqe1kXpVF0BDyGb5f5yzxWSJd_WNM
• RNAseq Differential Gene Expression Introductory tutorial https://docs.google.com/document/pub?id=1KbTiBHtvHLfPRZ39AY3uriazrINA8TJzgjjwn1zPP7Y

" Please add your favourite NGS link below in comment section for the benefit of bioinformatics community ". 

Address of the bookmark: http://chagall.med.cornell.edu/NGScourse/

Walk- in- Test cum Interview (based on test) for the selection of Research Associate

under the scheme “Distributed Information Sub Centre –DISC” & Research Assistant under scheme “Phytophthora, Fusarium and Ralstonia diseases of Horticultural and Field Crops” will be held at this Institute as per details indicated below.

WALK -IN- TEST CUM INTERVIEW

Name of the post : Research Associate

Date of Interview : 21-05-2014 at 10.00 AM

No. of posts : One

Qualifications : a)Essential

Ph.D Degree in Bioinformatics OR : Masters degree in Bioinformatics with a minimum of
60% marks or equivalent OGPA with at least two years research experience as evidenced from fellowship/ associateship/training/published papers etc.

b)Desirable: Experience in NGS data analysis.

Emoluments : Rs. 23,000/- per month + HRA (Masters Degree Holders)

Rs. 24,000/- per month + HRA (Ph.D Degree Holders)

Upper age limit : 40 years for Men & 45 years for Women as on date of Interview (Upper Age limits are relaxable for SC, ST and OBC candidates as per Govt. of India norms (at present 5 years for SC/ST and 3 years for OBC)

Duration of Project : Till 31-03-2017.

Title of Assigment : Research Assistant (on contract basis)

No. of vacancy : One

Qualification : Essential : Post Graduation in Bioinformatics and Minimum one year experience in NGS data analysis

Desirable : Experience in Perl/Python/R

Remuneration : Rs. 20,000/- per month (consolidated)

Scope of work :

1. Analysis of different file formats and their conversions.

2. Assessing the quality of data and filtering of raw reads.
3. Assembling the raw reads-de novo as well as reference mapping.
4. Compression of aligned reads using Jam tools
5. RNA-seq. Analysis
6. Differential expression testing involving Normalization, Statistical testing, heat map generation & hierarchical clustering
7. Annotating the assembled genome and geneet testing and their validation
8. Metabolic pathway analysis
9. Comparative genomics
10. Setting up of genome browsers.

Period of Assigment : Initially for six months.

Date & Venue of Interview : 21-05-2014 at IISR, Kozhikode at 10.00 AM

More at http://www.spices.res.in/pdf/disc-advtmnt.pdf

De Bruijn Graphs for NGS Assembly
Algorithms for PacBio Reads
Software and Hardware Concepts for Bioinformatics
Finding us in Homolog.us (Search Algorithms)
NGS Genome and RNAseq Assembly - a Hands on Primer
Introduction to PERL, Python, R and C/C++ for Bioinformatics

Address of the bookmark: http://www.homolog.us/Tutorials/

 http://cosmos.hms.harvard.edu/.

Address of the bookmark: https://cosmos.hms.harvard.edu/