BOL: Related items

Libraries or management tools for high throughput sequencing data

LEGE — Fri, 04 Oct 2024 02:45:06 -0500

GATB Library. The Genome Analysis Toolbox with de-Bruijn graph. A large part of tools developed by the GenScale team are based on this library.
These methods enable the analysis of data sets of any size on multi-core desktop computers, including very huge amount of reads data coming from any kind of organisms such as bacteria, plants, animals and even complex samples (e.g. metagenomes). Among them are (the full is available here: https://gatb.inria.fr/software/):
LRez: C++ Library and toolkit for the barcode-based management and indexation of linked-read datasets.

Variant calling and/or genotyping

DiscoSNP++ and discoSnpRAD: Reference-free small variant discovery (SNPs and indels)
MindTheGap: Detection and assembly of large insertion variants
TakeABreak: reference-free inversion discovery tool
SVJedi: Structural Variant genotyper with long read data
SVJedi-graph: Structural Variant genotyper with long read data using a variation graph

Sequence assembly

MinYS: reference-guided genome assembly in metagenomics data
MTG-link: local assembly tool for linked-read data
Minia: De novo short read assembler
de-novo pipeline: de-novo assembly pipeline (error correction / contigs / scaffolding) for genomes and meta-genomes
Mapsembler2: Targeted assembly (not maintained)

Managing k-mers & indexation

findere: simple strategy for speeding up queries and for reducing false positive calls from any Approximate Membership Query data structure.
- fimpera extends findere adding the abundance information.
kmtricks: modular tool suite for counting kmers, and constructing Bloom filters or kmer matrices, for large collections of sequencing data.
kmindex is a tool for indexing and querying sequencing samples. It is built on top of kmtricks.
back to sequences: Find sequences (reads, unitigs, genes) related to a set of kmers in large datasets, in a matter of seconds.
Backpack Quotient Filter: k-mer indexing data structure with abundance
short read connector: Detect similar reads from potentially large read set
DSK: Count K-mer in sequences

Pangenome graph manipulation

Pancat: Pangenome Comparison and Analysis Toolkit
GFAGraphs: a Python library to handle pangenome graph files in GFA format.

Comparative metagenomics with k-mers

Simka and SimkaMin: Comparative metagenomics for large-scale datasets
Comparead & Commet: comparison of metagenomic datasets

Species and bacterial strains identification

ORI: software using long nanopore reads to identify bacteria present in a sample at the strain level
StrainFLAIR: STRAIN-level proFiLing using vArIation gRaph

General-purpose sequencing data manipulation

GASSST: long read mapper
Leon: short read compressor (now included in GATB-core)
Bloocoo: short read corrector
BCALM: Construct compacted de Bruijn graphs (unitigs)

Protein Structure

A_Purva: Contact Map Overlap solver
MD-Jeep: Distance Geometry solver
CSA: Comparative Structural Alignment

Workflow

SLICEE: parallel execution of bioinformatics workflows

Comparative Genomics

CASSIS: detection of rearrangement breakpoints
PLAST: intensive bank-to-bank sequence comparison
DRJBreakpointFinder: detection and precise localization of excision sites in proviral segments

Manta: rapid detection of structural variants and indels for germline and cancer sequencing applications.

Jit — Mon, 28 May 2018 09:41:39 -0500

Manta calls structural variants (SVs) and indels from mapped paired-end sequencing reads. It is optimized for analysis of germline variation in small sets of individuals and somatic variation in tumor/normal sample pairs. Manta discovers, assembles and scores large-scale SVs, medium-sized indels and large insertions within a single efficient workflow.

Address of the bookmark: https://github.com/Illumina/manta

NanoPack: visualizing and processing long-read sequencing data

Jit — Tue, 25 Dec 2018 21:20:50 -0600

The NanoPack tools are written in Python3 and released under the GNU GPL3.0 License. The source code can be found at https://github.com/wdecoster/nanopack, together with links to separate scripts and their documentation. The scripts are compatible with Linux, Mac OS and the MS Windows 10 subsystem for Linux and are available as a graphical user interface, a web service at http://nanoplot.bioinf.be and command line tools.

Address of the bookmark: https://github.com/wdecoster/nanopack

nQuire: A statistical framework for ploidy estimation using NGS short-read data

Jit — Thu, 31 Jan 2019 05:12:19 -0600

nQuire implements a set of commands to estimate ploidy level of individuals from species, where recent polyploidization occurred and intraspecific ploidy variation is observed. Specifically, nQuire uses next-generation sequencing data to distinguish between diploids, triploids and tetraploids, on the basis of frequency distributions at variant sites where only two bases are segregating.

For more background see also the publication at BMC Bioinformatics.

https://github.com/clwgg/nQuire

Address of the bookmark: https://github.com/clwgg/nQuire

Parliament2: Runs a combination of tools to generate structural variant calls on whole-genome sequencing data

Jit — Thu, 28 May 2020 21:57:03 -0500

Parliament2 identifies structural variants in a given sample relative to a reference genome. These structural variants cover large deletion events that are called as Deletions of a region, Insertions of a sequence into a region, Duplications of a region, Inversions of a region, or Translocations between two regions in the genome.

Parliament2 runs a combination of tools to generate structural variant calls on whole-genome sequencing data. It can run the following callers: Breakdancer, Breakseq2, CNVnator, Delly2, Manta, and Lumpy. Because of synergies in how the programs use computational resources, these are all run in parallel. Parliament2 will produce the outputs of each of the tools for subsequent investigation.

Address of the bookmark: https://github.com/dnanexus/parliament2

STRUM: structure-based prediction of protein stability changes upon single-point mutation

BioStar — Mon, 10 Sep 2018 13:21:49 -0500

STRUM is a method for predicting the fold stability change (ΔΔG) of protein molecules upon single-point nsSNP mutations. STRUM adopts a gradient boosting regression approch to train the Gibbs free-energy changes on a variety of features at different levels of sequence and structure properties. The unique characteristics of STRUM is the combination of sequence profiles with low-resolution structure models from protein structure prediction, which helps enhance the robustness and accuracy of the method and make it applicable to various protein seqences, including those without experimental structures

Address of the bookmark: https://zhanglab.ccmb.med.umich.edu/STRUM/

Scripts for the analysis of HGT in genome sequence data.

Jit — Wed, 29 Nov 2017 16:44:10 -0600

Scripts for the analysis of HGT in genome sequence data

Address of the bookmark: https://github.com/reubwn/hgt

Epiviz: an interactive visualization tool for functional genomics data.

Jit — Mon, 09 Jul 2018 05:27:39 -0500

Epiviz is an interactive visualization tool for functional genomics data. It supports genome navigation like other genome browsers, but allows multiple visualizations of data within genomic regions using scatterplots, heatmaps and other user-supplied visualizations. It also includes data from the Gene Expression Barcode project for transcriptome visualization. It has a flexible plugin framework so users can addd3 visualizations. You can see a video tour here.

https://bioconductor.org/packages/release/bioc/html/epivizr.html

https://github.com/epiviz

https://github.com/epiviz/epiviz

Address of the bookmark: https://epiviz.github.io/

ZENBU: a collaborative, omics data integration and interactive visualization system

BioJoker — Fri, 04 Jan 2019 13:35:26 -0600

ZENBU is a data integration, data analysis, and visualization system enhanced for RNAseq, ChipSeq, CAGE and other types of next-generation-sequence-tag (NGS) based data. ZENBU allows for novel data exploration through "on-demand" data processing and interactive linked-visualizations and is able to make many-views from the same primary sequence alignment data which users can uploaded from BAM, BED, GFF and tab-text files.
Please check our documentation wiki for details on how to use the system, or check out some of the views above.

Address of the bookmark: http://fantom.gsc.riken.jp/zenbu/

OMTools: a software package for visualizing and processing optical mapping data

BioJoker — Fri, 29 Mar 2019 01:21:54 -0500

OMTools, an efficient and intuitive data processing and visualization suite to handle and explore large-scale optical mapping profiles. OMTools includes modules for visualization (OMView), data processing and simulation. These modules together form an accessible and convenient pipeline for optical mapping analyses.

https://github.com/TF-Chan-Lab/OMTools

Address of the bookmark: https://github.com/TF-Chan-Lab/OMTools