BOL: Related items

Salzberg lab

Mon, 15 May 2017 05:14:01 -0500

We are a computational biology lab that develops novel methods for analysis of DNA and RNA sequences. Our research includes software for aligning and assembling RNA-seq data, whole-genome assembly, and microbiome analysis. We work closely with biomedical scientists to apply these methods to current problems arising in a broad spectrum of biological and medical research areas. We’re also part of the Center for Computational Biology, a group of 20+ faculty members and their labs at Johns Hopkins working on computational, statistical, and mathematical methods that can turn massive genomic data sets into biologically and clinically useful information.

https://salzberg-lab.org/

Quick next generation sequencing (NGS) terms definition

Neel — Fri, 09 Jun 2017 04:52:26 -0500

fragment size: the Illumina WGS protocol generates paired-end reads from both ends of longer fragments. The lengths of these fragments are assumed to be sampled from a normal distribution. Therefore, in the absence of structural variants, mapping locations of the paired ends span within an interval [δmin,δmax]. Most (>90%) of paired-end reads are sampled from no-SV regions, therefore the fragment size distribution can be learned empirically for each WGS data set separately.

concordant reads: a read pair is called concordant if they can be mapped to the reference genome as “expected”: (a) mapped to opposing strands where the upstream read is mapped to the forward strand and the downstream read is mapped to the reverse strand2, (b) the distance between ends is between the minimum and maximum expected fragment size.

discordant reads: briefly, any non-concordant read pair is considered discordant. Note that, by definition, the discordant read pairs signal potential SVs. The sequence signature produced by these type of reads is known as read-pair signature.

split reads: a read that can only be mapped to the reference genome by breaking into two sub-reads is called a split-read. These types of reads also indicate a potential SV or a short insertion or deletion (indel).

read depth: number of reads that map within a region of the genome. Overall genome-wide read depth is also referred to as depth of coverage. It is expected that the number of reads that “cover” each base-pair to follow a Poisson distribution. Therefore, if the read depth over a certain region deviates significantly from this distribution, it signals for a potential copy number variation (CNV).

PLAST: A fast, accurate and NGS scalable bank-to-bank sequence similarity search tool

Jit — Fri, 01 Dec 2017 04:10:54 -0600

PLAST is a fast, accurate and NGS scalable bank-to-bank sequence similarity search tool providing significant accelerations of seeds-based heuristic comparison methods, such as the Blast suite of algorithms.

Relying on unique software architecture, PLAST takes full advantage of recent multi-core personal computers without requiring any additional hardware devices.

PLAST stands for Parallel Local Sequence Alignment Search Tool and is was published in BMC Bioinformatics.

PLAST is a general purpose sequence comparison tool providing the following benefits:

PLAST is a high-performance sequence comparison tool designed to compare two sets of sequences (query vs. reference),
Reduces the processing time of sequences comparisons while providing highest quality results,
Contains a fully integrated data filtering engine capable of selecting relevant hits with user-defined criteria (E-Value, identity, coverage, alignment length, etc.),
Does not require any additional hardware, since it is a software solution. It is easy to install, cost-effective, takes full advantage of multi-core processors and uses a small RAM footprint,
Ready to be used on desktop computer, cluster, cloud as well as within distributed system running Hadoop.

https://plast.inria.fr/

Address of the bookmark: https://plast.inria.fr/

HALC: High throughput algorithm for long read error correction

Jit — Fri, 08 Jun 2018 10:47:41 -0500

HALC, a high throughput algorithm for long read error correction. HALC aligns the long reads to short read contigs from the same species with a relatively low identity requirement so that a long read region can be aligned to at least one contig region, including its true genome region’s repeats in the contigs sufficiently similar to it (similar repeat based alignment approach) HALC was able to obtain 6.7-41.1% higher throughput than the existing algorithms while maintaining comparable accuracy. The HALC corrected long reads can thus result in 11.4-60.7% longer assembled contigs than the existing algorithms.

Address of the bookmark: https://github.com/lanl001/halc

KAT: a K-mer analysis toolkit to quality control NGS datasets and genome assemblies

Jit — Fri, 06 Jul 2018 03:36:45 -0500

KAT is a suite of tools that analyse jellyfish hashes or sequence files (fasta or fastq) using kmer counts. The following tools are currently available in KAT:

hist: Create an histogram of k-mer occurrences from a sequence file. Adds metadata in output for easy plotting.
gcp: K-mer GC Processor. Creates a matrix of the number of K-mers found given a GC count and a K-mer count.
comp: K-mer comparison tool. Creates a matrix of shared K-mers between two (or three) sequence files or hashes.
sect: SEquence Coverage estimator Tool. Estimates the coverage of each sequence in a file using K-mers from another sequence file.
blob: Given, reads and an assembly, calculates both the read and assembly K-mer coverage along with GC% for each sequence in the assembly.SEquence Coverage estimator Tool.
filter: Filtering tools. Contains tools for filtering k-mer hashes and FastQ/A files:
- kmer: Produces a k-mer hash containing only k-mers within specified coverage and GC tolerances.
- seq: Filters a sequence file based on whether or not the sequences contain k-mers within a provided hash.
plot: Plotting tools. Contains several plotting tools to visualise K-mer and compare distributions. The following plot tools are available:
- density: Creates a density plot from a matrix created with the "comp" tool. Typically this is used to compare two K-mer hashes produced by different NGS reads.
- profile: Creates a K-mer coverage plot for a single sequence. Takes in fasta coverage output coverage from the "sect" tool
- spectra-cn: Creates a stacked histogram using a matrix created with the "comp" tool. Typically this is used to compare a jellyfish hash produced from a read set to a jellyfish hash produced from an assembly. The plot shows the amount of distinct K-mers absent, as well as the copy number variation present within the assembly.
- spectra-hist: Creates a K-mer spectra plot for a set of K-mer histograms produced either by jellyfish-histo or kat-histo.
- spectra-mx: Creates a K-mer spectra plot for a set of K-mer histograms that are derived from selected rows or columns in a matrix produced by the "comp".

In addition, KAT contains a python script for analysing the mathematical distributions present in the K-mer spectra in order to determine how much content is present in each peak.

This README only contains some brief details of how to install and use KAT. For more extensive documentation please visit: https://kat.readthedocs.org/en/latest/

https://academic.oup.com/bioinformatics/article/33/4/574/2664339

Address of the bookmark: https://github.com/TGAC/KAT

AlignQC: A tool for assessing an alignment, and generating reports that are easy to share

Jit — Tue, 07 Aug 2018 04:41:07 -0500

Long read alignment analysis. Generate a reports on sequence alignments for mappability vs read sizes, error patterns, annotations and rarefraction curve analysis. The most basic analysis only requires a BAM file, and outputs a web browser compatible xhtml to visualize/share/store/extract analysis results.

https://f1000research.com/articles/6-100/

https://github.com/jason-weirather/AlignQC

Address of the bookmark: https://www.healthcare.uiowa.edu/labs/au/AlignQC/

nQuire: a statistical framework for ploidy estimation using next generation sequencing

Jit — Thu, 04 Oct 2018 05:23:59 -0500

nQuire provides a statistical framework to study organisms with intraspecific variation in ploidy. nQuire is likely to be useful in epidemiological studies of pathogens, artificial selection experiments, and for historical or ancient samples where intact nuclei are not preserved. It is implemented as a stand-alone Linux command line tool in the C programming language and is available at https://github.com/clwgg/nQuireunder the MIT license.

Address of the bookmark: https://github.com/clwgg/nQuireunder

Genobuntu: A software package containing more than 70 software and packages oriented towards NGS and genome assembly

BioStar — Tue, 11 Dec 2018 05:15:57 -0600

Genobuntu is a software package containing more than 70 software and packages oriented towards NGS. In its current version, Genobuntu supports pre assembly tools, genome assemblers as well as post assembly tools.

Commonly used biological software and example script files for different assembly pipelines have also been provided, where the example script files can be updated to suit one’s experimental needs. Genobuntu attempts to reduce the amount of time and energy needed to build software workstations and it can also act as a good teaching source for a class room setting.

https://sourceforge.net/projects/genobuntu/

Address of the bookmark: https://sourceforge.net/projects/genobuntu/

Introduction to Bioinformatics

eliabrodsky — Wed, 05 Jun 2019 14:58:11 -0500

Introduction to bioinformatics is a course for biologists and clinicians that would like to learn more about the way bioinformatics is used in healthcare, biotech and pharmaceuitcal industry as well as basic research. The course covers many of the topics transformed by the emergence of big data and computational technologies. To learn more about the course, visit: https://edu.t-bio.info/course/introduction-bioinformatics/

Bioinformatics Training Courses At RASA LSI

RASA Life Sciences — Wed, 06 Nov 2019 00:30:51 -0600

RASA conducts comprehensive Life Science skill development training courses in Pune, India for working professionals, researchers, students and job-seeker. The trainings are crafted meticulously, covering different modules of courses such as Bioinformatics course, In silico Drug Discovery course, Next Generation Sequence data analysis course, Molecular Biology & Life science software development course wherein you learn from industry leaders how to apply these skills in life science & have a command over software developing process by using various methodologies. We conduct in-class training and instructor-led live online classes worldwide, along with corporate and skill development training worldwide.

Workshops are conducted in regular intervals on Drug Designing, Protein Modeling and Simulation, Chemoinformatics, Bioinformatics etc.The workshops are highly beneficial for working professionals, students, researcher for enhancements of the skills in short duration.