BOL: Related items

Peregrine & SHIMMER Genome Assembly Toolkit

Abhi — Thu, 16 Dec 2021 02:50:19 -0600

Peregrine is a fast genome assembler for accurate long reads (length > 10kb, accuracy > 99%). It can assemble a human genome from 30x reads within 20 cpu hours from reads to polished consensus. It uses Sparse HIereachical MimiMizER (SHIMMER) for fast read-to-read overlaping without quadratic comparisions used in other OLC assemblers.

Address of the bookmark: https://github.com/cschin/Peregrine

Genome U-Plot: a whole genome visualization

Rahul Nayak — Fri, 13 Jul 2018 19:50:41 -0500

Genome U-Plot for producing clear and intuitive graphs that allows researchers to generate novel insights and hypotheses by visualizing SVs such as deletions, amplifications, and chromoanagenesis events. The main features of the Genome U-Plot are its layered layout, its high spatial resolution and its improved aesthetic qualities.

https://github.com/gaitat/GenomeUPlot

Address of the bookmark: https://github.com/gaitat/GenomeUPlot

deepTools

Martin Jones — Sat, 08 Nov 2014 15:02:08 -0600

deepTools addresses the challenge of handling the large amounts of data that are now routinely generated from DNA sequencing centers. To do so, deepTools contains useful modules to process the mapped reads data to create coverage files in standard bedGraph and bigWig file formats. By doing so, deepTools allows the creation of normalized coverage files or the comparison between two files (for example, treatment and control). Finally, using such normalized and standardized files, multiple visualizations can be created to identify enrichments with functional annotations of the genome.

Publicaton: http://nar.oxfordjournals.org/content/early/2014/05/05/nar.gku365.full

Source Code and Wiki: https://github.com/fidelram/deepTools/wiki

Galaxy Tool Shed repository: http://toolshed.g2.bx.psu.edu/view/bgruening/deeptools

and example Galaxy workflows: http://toolshed.g2.bx.psu.edu/view/bgruening/deeptools_workflows

vcfR

Archana Malhotra — Fri, 19 Aug 2016 07:38:24 -0500

Most variant calling pipelines result in files containing large quantities of variant information. The variant call format (vcf) is an increasingly popular format for this data. The format of these files and their content is discussed in the vignette ‘vcf data.’ These files are typically intended to be post-processed (i.e., filtered) as an attempt to remove false positives or otherwise problematic sites. The R package vcfR provides tools to facilitate this filtering as well as to visualize the effects of choices made during this process.

Address of the bookmark: https://cran.r-project.org/web/packages/vcfR/vignettes/visualization_1.html

Ribbon !!

Jit — Fri, 21 Oct 2016 04:54:30 -0500

Visualization has played an extremely important role in the current genomic revolution to inspect and understand variants, expression patterns, evolutionary changes, and a number of other relationships. However, most of the information in read-to-reference or genome-genome alignments is lost for structural variations in the one-dimensional views of most genome browsers showing only reference coordinates. Instead, structural variations captured by long reads or assembled contigs often need more context to understand, including alignments and other genomic information from multiple chromosomes. We have addressed this problem by creating Ribbon (genomeribbon.com) an interactive online visualization tool that displays alignments along both reference and query sequences, along with any associated variant calls in the sample. This way Ribbon shows patterns in alignments of many reads across multiple chromosomes, while allowing detailed inspection of individual reads (Supplementary Note 1). For example, here we show a gene fusion in the SK-BR-3 breast cancer cell line linking the genes CYTH1 and EIF3H. While it has been found in the transcriptome previously, genome sequencing did not identify a direct chromosomal fusion between these two genes. After SMRT sequencing, Ribbon shows that there are indeed long reads that span from one gene to the other, going through not one but two variants, for the first time showing the genomic link between these two genes (Figure 1a). More gene fusions of this cancer cell line are investigated in Supplementary Note 2. Figure 1b shows another complex event in this sample made simple in Ribbon: the translocation of a 4.4 kb sequence deleted from chr19 and inserted into chr16 (Figure 1b). Thus, Ribbon enables understanding of complex variants, and it may also help in the detection of sequencing and sample preparation issues, testing of aligners and variant-callers, and rapid curation of structural variant candidates (Supplementary Note 3). In addition to SAM and BAM files with long, short, or paired-end reads, Ribbon can also load coordinate files from whole genome aligners such as MUMmer. Therefore, Ribbon can be used to test assembly algorithms or inspect the similarity between species. Supplementary Note 4 shows a comparison of gorilla and human genomes using Ribbon, highlighting major structural differences. In conclusion, Ribbon is a powerful interactive web tool for viewing complex genomic alignments.

Script at https://github.com/MariaNattestad/ribbon

Address of the bookmark: http://genomeribbon.com/

The Genome 10K Project

Tue, 29 Jul 2014 09:11:04 -0500

https://genome10k.soe.ucsc.edu The Genome 10K project aims to assemble a genomic zoo—a collection of DNA sequences representing the genomes of 10,000 vertebrate species, approximately one for every vertebrate genus. The trajectory of cost reduction in DNA sequencing suggests that this project will be feasible within a few years. Capturing the genetic diversity of vertebrate species would create an unprecedented resource for the life sciences and for worldwide conservation efforts. The growing Genome 10K Community of Scientists (G10KCOS), made up of leading scientists representing major zoos, museums, research centers, and universities around the world, is dedicated to coordinating efforts in tissue specimen collection that will lay the groundwork for a large-scale sequencing and analysis project.

BRAKER: pipeline for fully automated prediction of protein coding genes with GeneMark-ES/ET and AUGUSTUS in novel eukaryotic genomes

Jit — Thu, 01 Sep 2016 08:02:59 -0500

Gene finding in eukaryotic genomes is notoriously difficult to automate. The task is to design a work flow with a minimal set of tools that would reach state-of-the-art performance across a wide range of species. GeneMark-ET is a gene prediction tool that incorporates RNA-Seq data into unsupervised training and subsequently generates ab initio gene predictions. AUGUSTUS is a gene finder that usually requires supervised training and uses information from RNA-Seq reads in the prediction step. Complementary strengths of GeneMark-ET and AUGUSTUS provided motivation for designing a new combined tool for automatic gene prediction.

http://www.ncbi.nlm.nih.gov/pubmed/26559507

Address of the bookmark: http://bioinf.uni-greifswald.de/bioinf/braker/

Download assemblies from NCBI

Bulbul — Mon, 15 May 2017 06:02:32 -0500

A new “Download assemblies” button is now available in the Assembly database. This makes it easy to download data for multiple genomes without having to write scripts.

For example, you can run a search in Assembly and use check boxes (see left side of screenshot below) to refine the set of genome assemblies of interest. Then, just open the “Download assemblies” menu, choose the source database (GenBank or RefSeq), choose the file type, and start the download. An archive file will be saved to your computer that can be expanded into a folder containing your selected genome data files.

More at https://ncbiinsights.ncbi.nlm.nih.gov/2017/05/08/genome-data-download-made-easy/

assemblytics: delta file to analyze alignments of an assembly to another assembly or a reference genome

Jit — Thu, 14 Jun 2018 07:31:00 -0500

Download and install MUMmer Align your assembly to a reference genome using nucmer (from MUMmer package) $ nucmer -maxmatch -l 100 -c 500 REFERENCE.fa ASSEMBLY.fa -prefix OUT Consult the MUMmer manual if you encounter problems Optional: Gzip the delta file to speed up upload (usually 2-4X faster) $ gzip OUT.delta Then use the OUT.delta.gz file for upload. Upload the .delta or delta.gz file (view example) to Assemblytics Important: Use only contigs rather than scaffolds from the assembly. This will prevent false positives when the number of Ns in the scaffolded sequence does not match perfectly to the distance in the reference. The unique sequence length required represents an anchor for determining if a sequence is unique enough to safely call variants from, which is an alternative to the mapping quality filter for read alignment. http://assemblytics.com/

Address of the bookmark: http://assemblytics.com/

Long read assembly workshop !

Rahul Nayak — Thu, 04 Oct 2018 17:23:18 -0500

This is a tutorial for a workshop on long-read (PacBio) genome assembly.

It demonstrates how to use long PacBio sequencing reads to assemble a bacterial genome, and includes additional steps for circularising, trimming, finding plasmids, and correcting the assembly with short-read Illumina data.

Please comment if you know any other long read addembly tutorial.

Address of the bookmark: http://sepsis-omics.github.io/tutorials/modules/cmdline_assembly_v2/