https://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-018-4724-8

Address of the bookmark: https://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-018-4724-8

I have used the following assemblers

• Spades (v. 3.10.1)
• CANU (v. 1.6)
• Unicycler (v. v0.4.1)
• Miniasm (v. 0.2-r137-dirty)

I have used the following mappers

• minimap2 (v. 2.0rc1-r232)
• minimap (v. 0.2-r124-dirty)
• bwa (v. 0.7.12-r1039)

I have used the following polishing tools

• Racon (v. not available)
• Pilon (v. 1.18)
• Nanopolish (v. 0.8.3)

I have used the following tools to assess genome assembly characteristics

• ANI.pl (https://github.com/chjp/ANI)
• CheckM (v. 1.0.7)
• Prokka (v. 1.12)
• QUAST (v. 2.3)
• mummer (v. not available)

If you have any ideas or superior tools we have missed please let us know in the comments.

During the first phase of ENCODE, published in 2007, microarray-based technologies were used to detect regions associated with transcription factors, certain histone modifications and open chromatin within a pre-specified 1% of the human genome.

ENCODE’s second phase saw a switch to sequencing-based technologies, the addition of new assay types and the analysis of functional elements genome-wide, described in a collection of research articles in 2012.

The Encyclopedia paper of ENCODE 3, published in Nature, gives an overview of the various assays that were performed in human and mouse cell lines and tissues and describes a Registry of human and mouse candidate cis-regulatory elements (cCREs).

More at https://www.nature.com/immersive/d42859-020-00027-2/index.html

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

• Homology-based misassembly correction
• Homology-based assembly scaffolding and patching
• Scaffold merging

Address of the bookmark: https://github.com/malonge/RagTag

1. SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.

2. ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.

3. Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.

4. SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.

5. MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.

6. Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.

7. Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.

8. SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.

9. SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.

10. Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.

11. Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.

12. wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.

13. Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.

14. Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.

15. CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.

16. Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

The successful candidate will be in charge of the detection of polymorphisms including structural variants, of the comparison of multiple and diverse genomes of a same species and of the construction of pan- and core-genomes. These challenging tasks will require bioinformatics developments and implementation of methods for accommodating the high level of repetitiveness of complex genomes. The tools will be integrated into pipelines and made available to end-users through the Galaxy platform. The bioinformatician will therefore also have to provide researchers with advices on their experimental designs in order to ensure compliance of produced datasets with pipelines requirements. He/she will be hosted by a bioinformatics/informatics team (7 people) (http://moulon.inra.fr/index.php/fr/equipestransversales/atelier-de-bioinformatique) which has computational facilities and expertise in NGS data analysis, and will benefit as well from national and international collaborative networks (Aplibio http://www.renabi.fr/platforms/aplibio/, Transplant http://transplantdb.eu, AMAIZING http://www.amaizing.fr/).

The position requires a doctoral degree (PhD) in bioinformatics with strong expertise in script writing (Python/Perl) and pipeline development.

Applicants should send a CV and the names of 2 referees willing to provide a letter of recommendation to joets@moulon.inra.fr.

Center for Integrative Genomics, University of Lausanne, Switzerland

Two postdoctoral positions (2 years with possible extensions up to 5 years) are available immediately in the evolutionary genomics group of Henrik Kaessmann.

We are seeking highly qualified and enthusiastic applicants with strong skills in computational biology/bioinformatics, preferably also with experience in data mining and comparative or evolutionary genome analysis.

We have been interested in a range of topics related to the functional evolution of genomes from primates (e.g., the emergence of new genes and their functions) and other mammals (e.g., the origin and evolution of mammalian sex chromosomes). In the framework of a recently launched series of projects, a large amount of transcriptome and genome (e.g., epigenome) data are being produced by the wet lab unit of the group using next generation sequencing technologies for a unique collection of tissues from representative mammals and outgroup species (e.g., birds). Topics of current projects based on these data include the origins and/or evolution of protein-coding genes, alternative splicing, microRNAs, long noncoding RNAs, and dosage compensation.

The postdoctoral fellow will perform integrated evolutionary/bioinformatics analyses based on data produced in the lab and available genomic data. The specific project will be developed together with the candidate.

The language of the institute is English, and its members form an international group that is rapidly expanding. The institute is located in Lausanne, a beautiful city at Lake Geneva.

For more information on the group and our institute more generally, please refer to our website: http://www.unil.ch/cig/page7858_en.html

Please submit a CV, statement of research interest, and names of three references to: Henrik Kaessmann (Henrik.Kaessmann@unil.ch).

Webpage : http://www.unil.ch/cig/page7858.html

WALK-IN-INTERVIEW

A walk-in-Interview is proposed to be held at National Bureau of Animal Genetic Resources, Karnal (Haryana)-132001 at 11:30 AM on 18.12.2013 to select One RA and One SRF as per details given below:

1. One post of Research Associate under DBT sponsored Support under BIPP for the “SanGenix: A comprehensive Next Generation Sequence (NGS) data analysis solution” as Grants in AID. Thepost duration is Upto 31st March 2015 or earlier.

2. One post of Senior Research Fellow under NAIP (Component-4) Bioprospecting of genes and allele mining for abiotic stress tolerance. The post duration is Upto 31st March 2014 or earlier

Essential Qualifications: Ph.D. in Bioinformatics/ Computer Application or
First Class Masters degree in Bioinformatics/ Computer Application with two years experience as evidenced by Publications.

Desirable: Experience in the field of handling Next generation Sequencing Data.

Emolument: Rs. 22,000/- per month + HRA as per admissibility

Age Limit:

40 years for Men
45 years for women as on date of interview

Research Associate: ONE

Duration of engagement: Upto

31st March 2015 or earlier & Coterminus with the project

Responsibilities: To help the PI for Beta testing and development of the SanGenix Tool for NGS data.

Essential Qualifications: First Class Masters’ degree in Bioinformatics/Biotechnology.

Desirable: Experience in the field of Biotechnology/ Bioinformatics

Emoluments:

Rs. 16,000/- per month + HRA as per admissibility.
Senior Research Fellow: ONE
Duration of engagement: Upto 31st March 2014 or earlier & Coterminus with the project

Age Limit

35 years for men
40 years for women as on date of interview

Note: Relaxation in age will be admissible for SC/ST & OBC candidates as per Govt. of India /ICAR norms

1. The applicants must bring with them original documents and brief of research work done during post graduation along with a set of photocopy and latest two passport size photographs.
2. A panel of selected candidates will also be made which may be utilized for filling of positions of shorter durations in future if demand arises.
3. Experience certificate in original, if any 4. The above positions are purely on temporary basis and are co-terminus with the project. No TA/DA will be paid to attend the interview.
5. Any other clarifications can be had on the date of interview.
6. The Director’s decision will be final and binding on all respects.

Advertisement: http://210.212.93.85/rasrfadvertise.pdf

The Job detail

Advancing the SNP-discovery and polymorphism assessment work across several germplasm panels representing global genetic diversity
Population genetic and genomic analyses, testing the hypothesis related to adaptation in multiple geographic regions
Develop SNP assays from large scale GBS and other re-sequencing data for several target traits utilizing available phenotyping data
Combined analyses of genotypic and phenotypic data for discovery of marker-trait associations, and conducting GWAS
Processing, analyzing, and archiving large-scale genomic data sets, assessing data quality, conducting analyses, interpreting findings, and communicating findings to others including preparation of reports, presentations, posters and journal articles
Providing support to MSc and PhD students on topic related to its major core of research
Any other work assigned by the supervisor

The Person:

PhD in bioinformatics, genetics, computational biology preferably with 1 to 2 years of experience;
familiar with standard bioinformatics tools and scripting languages and emerging and evolving software platforms relevant to bioinformatics and computational biology;
ability to create new analytical pipelines; experience with handling large data sets;
ability to program in at least two of the following: C++, PERL, Python, R, Java.
will use next-generation sequencing technologies to generate marker data for genetic mapping and transcriptome data for expression QTL mapping, and will be responsible for data generation as well as data analysis.

Period and Remuneration: The assignment is for a period of two years, and can be extended for another year depending on performance. ICRISAT pays a very attractive all inclusive lump sum assignment fee payable in Indian Rupees.

How to Apply: Please send your application by email to icrisatjobs@cgiar.org, stating the job title (Special project Scientist-Sorghum Genomics) clearly in the subject column, addressed to the Director, Human Resources and Operations, ICRISAT, Patancheru, Andhra Pradesh 502 324, India, latest by 10 June 2014. The application should include an up-to-date Curriculum Vitae, a short statement of competencies and experience for the position, and the names and addresses (including phone/e-mail) of three referees. Only short-listed candidates will be contacted.

More at: http://www.icrisat.org/careers/Special-Project-Scientist-Sorghum-Genomics.htm