BOL: Related items

LSC: Improving PacBio Long Read Accuracy by Short Read Alignment

Abhimanyu Singh — Thu, 06 Sep 2018 16:27:35 -0500

Added Command line argument support.
Multi-stage execution modes.
Support for parallelization. Now execution proceeds in batches of long reads the size of which can be set by --long_read_batch_size N.
Better compressed intermediate files.
Added utilities folder.
Added support for multiple short read files.
Removed use of configuration file.

Address of the bookmark: https://www.healthcare.uiowa.edu/labs/au/LSC/

Snippy: Rapid haploid variant calling and core SNP phylogeny

Neel — Sat, 11 Aug 2018 11:06:56 -0500

Snippy finds SNPs between a haploid reference genome and your NGS sequence reads. It will find both substitutions (snps) and insertions/deletions (indels). It will use as many CPUs as you can give it on a single computer (tested to 64 cores). It is designed with speed in mind, and produces a consistent set of output files in a single folder. It can then take a set of Snippy results using the same reference and generate a core SNP alignment (and ultimately a phylogenomic tree).

snippy --cpus 16 --outdir mysnps --ref Listeria.gbk --R1 FDA_R1.fastq.gz --R2 FDA_R2.fastq.gz

Address of the bookmark: https://github.com/tseemann/snippy

Run miniasm assembler on nanopore reads !

Jit — Mon, 18 Dec 2017 04:07:50 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

Find the detail of the reads repeats:

fq2fa ONT_A.fastq ONT_A.fasta

minimap2 -xava-ont ONT_A.fasta ONT_A.fasta -t10 -X > AONT.paf

awk '{if($1==$6){print}}' AONT.paf > AONTself.paf

awk '$5=="-"' AONTself.paf | awk '{print $1}'| sort|uniq > invertedrepeat.list

Generated a few palindrome and repeats plots (highlighting only repeats largest than 10, 20 and 30 kb)

minidot -f 5 -m 30000 AONTself.paf > AONTself30000.eps
sed 's/_template_pass_FAH31515//' AONTself30000.eps > AONTself30000final.eps

minidot -f 5 -m 20000 AONTself.paf > AONTself20000.eps
sed 's/_template_pass_FAH31515//' AONTself20000.eps > AONTself20000final.eps

minidot -f 5 -m 10000 AONTself.paf > AONTself10000.eps
sed 's/_template_pass_FAH31515//' AONTself10000.eps > AONTself10000final.eps

Assemble with miniasm:

miniasm -f ONT_A.fasta AONT.paf > AONT.gfa
grep '^S' AONT.gfa |awk '{print ">"$2"\n"$3}' > AONT_miniasm.fasta

minimap2 -xasm10 AONT_miniasm.fasta AONT_miniasm.fasta -t1 -X > AONT_miniasm.paf

awk '{if($1==$6){print}}' AONT_miniasm.paf > AONT_miniasm_self.paf

minidot -f 5 -m 10000 AONT_miniasm_self.paf > AONT_miniasm_self10000.eps

Njoy the assembly !

Frequent Paired-end reads (PE 2x100) mapping command lines

Jit — Tue, 15 May 2018 08:59:29 -0500

bowtie2 -x hs37m -X 650 -q -1 r1.fq -2 r2.fq -S r12.bowtie2.sam

bwa aln hs37m.fa r1.fq > r1.sai && bwa aln hs37m.fa r2.fq > r2.sai \
&& bwa sampe hs37m r1.sai r2.sai r1.fq r2.fq > r12.bwa.sam

bwa bwasw ../index/bwa/hs37m.fa r12.fq > r12.bwasw.sam

gsnap -A sam -d hs37m r1.fq r2.fq > r12.gsnap.sam

novoalign -r Random -o SAM -f r1.fq r2.fq -i 500 50 -d hs37m-k14s3.novo > r12.novo.sam

smalt map -f samsoft -i 650 -o r12.smalt-k20s13.sam hs37m-k20s13 r1.fq r2.fq

stampy.py -g hs37m -h hs37m -o r12.stampy.sam -M r1.fq,r2.fq

soap -D hs37m.fa.index -a r1.fq -b r2.fq -l 32 -g 3 -u dummy -2 dummy -o r12.soap

PANDASEQ is a program to align Illumina reads, optionally with PCR primers embedded in the sequence, and reconstruct an overlapping sequence.

BioStar — Fri, 21 Sep 2018 10:19:52 -0500

Development packages for zlib and libbz2 are needed, as well as a standard compiler environment. On Ubuntu, this can be installed via:

sudo apt-get install build-essential libtool automake zlib1g-dev libbz2-dev pkg-config

On MacOS, the Apple Developer tools and Fink (or MacPorts or Brew) must be installed, then:

sudo fink install bzip2-dev pkgconfig

Address of the bookmark: https://github.com/neufeld/pandaseq

SViper: Swipe your Structural Variants called on long (ONT/PacBio) reads with short exact (Illumina) reads.

Neel — Sun, 22 Dec 2019 03:48:28 -0600

Call sviper

~$ ./sviper -s short-reads.bam -l long-reads.bam -r ref.fa -c variants.vcf -o polished_variants

This will output a polished_variants.vcf file, that contains all the refined variants.

Sometimes it is helpful to look at the polished sequence, e.g. with the IGV browser. In that case you want SViper to output the polished and aligned sequences in a bam file via the option --output-polished-bam:

~$ ./sviper -s short-reads.bam -l long-reads.bam -r ref.fa -c variants.vcf -o polished_variants --output-polished-bam

Address of the bookmark: https://github.com/smehringer/SViper

SLR-superscaffolder: A scaffold assemble pipeline for stLFR reads.

Jit — Fri, 14 Feb 2020 14:23:30 -0600

This is a scaffold assembler designed for stLFR reads[1]. It uses the link-reads information from stLFR reads to assemble contigs to scaffolds.

Here is an illustration of this pipeline:

Address of the bookmark: https://github.com/BGI-Qingdao/SLR-superscaffolder

Hifiasm: a haplotype-resolved assembler for accurate Hifi reads

Jit — Thu, 24 Dec 2020 10:03:36 -0600

Hifiasm is a fast haplotype-resolved de novo assembler for PacBio Hifi reads. It can assemble a human genome in several hours and works with the California redwood genome, one of the most complex genomes sequenced so far. Hifiasm can produce primary/alternate assemblies of quality competitive with the best assemblers. It also introduces a new graph binning algorithm and achieves the best haplotype-resolved assembly given trio data.

Address of the bookmark: https://github.com/chhylp123/hifiasm

Steps to find palindrome in genomes !

BioStar — Thu, 09 Mar 2023 02:56:54 -0600

Palindromes are sequences of nucleotides that read the same backward as forward. They can be present in genomes and have various biological functions. Here are some methods for discovering palindromes in genomes:

Direct sequence search: One of the simplest ways to discover palindromes is to search the genome sequence directly for palindromic sequences using pattern matching tools, such as regular expressions or string algorithms. This approach can be useful for discovering simple palindromes, but may miss more complex palindromic structures.
Dot plot analysis: Dot plot analysis is a graphical method that can be used to identify palindromic regions in a genome. It involves plotting the genome sequence against itself and examining the diagonal patterns that emerge. Palindromic regions will appear as symmetrical patterns along the diagonal.
Restriction enzyme analysis: Some restriction enzymes, such as EcoRI and HindIII, recognize palindromic sequences and cleave DNA at these sites. By digesting the genome with these enzymes and examining the resulting fragments, palindromic regions can be identified.
Next-generation sequencing: High-throughput sequencing technologies, such as PacBio and Oxford Nanopore, can generate long reads that can span entire palindromic regions. By mapping these reads to the genome, palindromic regions can be identified and characterized.
Comparative genomics: Comparing the genomes of related species can also reveal palindromic regions that are conserved across evolutionarily divergent lineages. This approach can help identify functional palindromes that are under selective pressure.

Overall, the discovery of palindromic sequences in genomes can be accomplished using a variety of methods, each with their own advantages and limitations. A combination of these methods can provide a comprehensive understanding of the palindromic landscape of a genome.

mrFAST: Micro Read Fast Alignment Search Tool

Neel — Tue, 26 Apr 2016 03:50:06 -0500

mrFAST is a read mapper that is designed to map short reads to reference genome with a special emphasis on the discovery of structural variation and segmental duplications. mrFAST maps short reads with respect to user defined error threshold, including indels up to 4+4 bp. This manual, describes how to choose the parameters and tune mrFAST with respect to the library settings. mrFAST is designed to find 'all' mappings for a given set of reads, however it can return one "best" map location if the relevant parameter is invoked.

More at http://mrfast.sourceforge.net/manual.html

Address of the bookmark: http://mrfast.sourceforge.net/manual.html