BOL: Related items

Oxford Nanopore Sequencing, Hybrid Error Correction, and de novo Assembly of a Eukaryotic Genome

Jit — Wed, 29 Nov 2017 05:08:53 -0600

Monitoring the progress of DNA molecules through a membrane pore has been postulated as a method for sequencing DNA for several decades. Recently, a nanopore-based sequencing instrument, the Oxford Nanopore MinION, has become available that we used for sequencing the S. cerevisiae genome. To make use of these data, we developed a novel open-source hybrid error correction algorithm Nanocorr (https://github.com/jgurtowski/nanocorr) specifically for Oxford Nanopore reads, as existing packages were incapable of assembling the long read lengths (5-50kbp) at such high error rate (between ~5 and 40% error). With this new method we were able to perform a hybrid error correction of the nanopore reads using complementary MiSeq data and produce a de novo assembly that is highly contiguous and accurate: the contig N50 length is more than ten-times greater than an Illumina-only assembly (678kb versus 59.9kbp), and has greater than 99.88% consensus identity when compared to the reference. Furthermore, the assembly with the long nanopore reads presents a much more complete representation of the features of the genome and correctly assembles gene cassettes, rRNAs, transposable elements, and other genomic features that were almost entirely absent in the Illumina-only assembly.

Address of the bookmark: http://schatzlab.cshl.edu/data/nanocorr/

Pacasus: Correction of palindromes in long reads from PacBio and Nanopore

BioStar — Mon, 12 Nov 2018 05:26:48 -0600

Tool for detecting and cleaning PacBio / Nanopore long reads after whole genome amplification. Check the poster from the Revolutionizing Next-Generation Sequencing (2nd edition) conference in the source folder: https://github.com/swarris/Pacasus/blob/master/vib2017.pdf.

The prepint version is found on http://www.biorxiv.org/content/early/2017/08/09/173872

It uses the pyPaSWAS framework for sequence alignment (https://github.com/swarris/pyPaSWAS)

Address of the bookmark: https://github.com/swarris/Pacasus

HALC: High throughput algorithm for long read error correction

Jit — Fri, 08 Jun 2018 10:47:41 -0500

HALC, a high throughput algorithm for long read error correction. HALC aligns the long reads to short read contigs from the same species with a relatively low identity requirement so that a long read region can be aligned to at least one contig region, including its true genome region’s repeats in the contigs sufficiently similar to it (similar repeat based alignment approach) HALC was able to obtain 6.7-41.1% higher throughput than the existing algorithms while maintaining comparable accuracy. The HALC corrected long reads can thus result in 11.4-60.7% longer assembled contigs than the existing algorithms.

Address of the bookmark: https://github.com/lanl001/halc

LRCstats: a tool for evaluating long reads correction methods

Aaryan Lokwani — Wed, 22 Aug 2018 11:05:04 -0500

LRCstats is an open-source pipeline for benchmarking DNA long read correction algorithms for long reads outputted by third generation sequencing technology such as machines produced by Pacific Biosciences. The reads produced by third generation sequencing technology, as the name suggests, are longer in length than reads produced by next generation sequencing technologies, such as those produced by Illumina. However, long reads are plagued by high error rates, which can cause issues in downstream analysis. Long read correction algorithms reduce the error rate of long reads either through self-correcting methods or using accurate, short reads outputted by next generation sequencing technologies to correct long reads.

Address of the bookmark: https://github.com/cchauve/lrcstats

Protocol for De novo Genome Assembly using Illumina Reads

BioStar — Sat, 16 Jan 2021 21:42:11 -0600

In this protocol, we address and describe the de novo assembly method for small to medium-sized genomes.

What is de novo genome assembly?
The method of taking a large number of short DNA sequences and placing them back together to create a reflection of the original chromosomes from which the DNA originated relates to genome assembly. No previous knowledge of the source DNA sequence length, structure or composition is inferred by De novo genome assemblies. The DNA of the target organism is split up into millions of tiny parts and read on a sequencing computer in a genome sequencing experiment. Depending on the sequencing system used, these "reads" range from 20 to 1000 nucleotide base pairs (bp) in length. Usually, length reads of 36 - 150 bp are produced for Illumina style short read sequencing. These reads can be either “single ended” as described above or “paired end.”

Why genome assembly?
In basic research into why and how they live, as well as in applied topics, identifying the DNA sequence of an organism is useful. Awareness of a DNA sequence may be useful in virtually any biological research because of the relevance of DNA to living things. For example, it may be used in medicine to classify, diagnose and eventually improve genetic disorder therapies. Similarly, pathogens study can lead to treatments for infectious diseases.

Raw NGS data
Reads can be saved as a Fasta file as text or in a FastQ file with their attributes. FastQ is the most common read file format since this is what the Illumina sequencing pipeline creates. This will henceforth be the subject of our conversation.

In a nutshell the protocol:
Get the sequence file(s) read from the sequencing machine (s).
Look at the readings - have an idea of what you have and what the standard is like.
If required, raw data cleanup/quality trimming.
Choose an adequate parameter set for assembly.
Assemble the data into scaffolds/contigs.
Examine the assembly performance and determine the efficiency of the assembly.

Read Quality Control:
Check the qualiy with fastQC.
Script
https://bioinformaticsonline.com/snippets/view/42540/install-fastqc-using-conda

Quality trimming/cleanup of read files.
This function trims adapters, barcodes and other contaminants from the reads.
Script
https://bioinformaticsonline.com/snippets/view/42542/trimmomatic-command

Genome Assembly:
The object of this portion of the protocol is to explain the method of assembling the reads trimmed by quality into draft contigs.

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o result_of_spades_assembly_all_illumina

A significant range of short-read assemblers are available. Everyone with strengths and disadvantages of their own.
Some of the assemblers available include:
Velvet
SOAP-denovo
MIRA
ALLPATHS

Next step is to assess the suitability and what to do with a draft package of contiguous details for the remainder of the study now. Few stuff you can note about the contigs you just created: They're the draft Contigs. Any mis-assemblies can occur.

Mis-assembly checking and assembly metric tools:
QUAST - Quality assessment tool for genome assembly http://bioinf.spbau.ru/quast
Mauve assembly metrics - http://code.google.com/p/ngopt/wiki/How_To_Score_Genome_Assemblies_with_Mauve
InGAP-SV - https://sites.google.com/site/nextgengenomics/ingap and http://ingap.sourceforge.net/
inGAP is also useful for finding structural variants between genomes from read mappings.

Genome finishing tools:
Semi-automated gap fillers:
Gap filler - http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/gapfiller/

IMAGE (V2) - http://sourceforge.net/apps/mediawiki/image2/index.php?title=Main_Page

Genome visualisers and editors:
Artemis - http://www.sanger.ac.uk/resources/software/artemis/
IGV - http://www.broadinstitute.org/igv/

Automated and semi automated annotation tools:
Prokka - https://github.com/tseemann/prokka
RAST - http://www.nmpdr.org/FIG/wiki/view.cgi/FIG/RapidAnnotationServer
JCVI Annotation Service - http://www.jcvi.org/cms/research/projects/annotation-service/

Frequent command use for the analysis are at:

https://bioinformaticsonline.com/blog/view/38765/list-of-tools-frequently-used-while-genome-assembly
https://bioinformaticsonline.com/pages/view/42275/frequent-parameters-for-bioinformatics-tools

INC-Seq: accurate single molecule reads using nanopore sequencing

Jit — Mon, 27 Nov 2017 10:38:56 -0600

INC-Seq reads enabled accurate species-level classification, identification of species at 0.1 % abundance and robust quantification of relative abundances, providing a cheap and effective approach for pathogen detection and microbiome profiling on the MinION system.

Address of the bookmark: https://github.com/CSB5/INC-Seq

P_RNA_scaffolder: a fast and accurate genome scaffolder using paired-end RNA-sequencing reads

Jit — Tue, 12 Jun 2018 08:14:41 -0500

P_RNA_scaffolder, a fast and accurate tool using paired-end RNA-sequencing reads to scaffold genomes. This tool aims to improve the completeness of both protein-coding and non-coding genes. After this tool was applied to scaffolding human contigs, the structures of both protein-coding genes and circular RNAs were almost completely recovered and equivalent to those in a complete genome, especially for long proteins and long circular RNAs.

Address of the bookmark: http://www.fishbrowser.org/software/P_RNA_scaffolder/

HiCanu: accurate assembly of segmental duplications, satellites, and allelic variants from high-fidelity long reads

BioStar — Fri, 27 Mar 2020 22:49:31 -0500

HiCanu, a significant modification of the Canu assembler designed to leverage the full potential of HiFi reads via homopolymer compression, overlap-based error correction, and aggressive false overlap filtering.

More at https://www.biorxiv.org/content/10.1101/2020.03.14.992248v3

Address of the bookmark: https://github.com/marbl/canu

Hifiasm: a haplotype-resolved assembler for accurate Hifi reads

Jit — Thu, 24 Dec 2020 10:03:36 -0600

Hifiasm is a fast haplotype-resolved de novo assembler for PacBio Hifi reads. It can assemble a human genome in several hours and works with the California redwood genome, one of the most complex genomes sequenced so far. Hifiasm can produce primary/alternate assemblies of quality competitive with the best assemblers. It also introduces a new graph binning algorithm and achieves the best haplotype-resolved assembly given trio data.

Address of the bookmark: https://github.com/chhylp123/hifiasm

LoRMA: A tool for correcting sequencing errors in long reads

Abhimanyu Singh — Thu, 06 Sep 2018 16:21:01 -0500

An error correction method that uses long reads only. The method consists of two phases: first, we use an iterative alignment-free correction method based on de Bruijn graphs with increasing length of k-mers, and second, the corrected reads are further polished using long-distance dependencies that are found using multiple alignments. According to our experiments, the proposed method is the most accurate one relying on long reads only for read sets with high coverage. Furthermore, when the coverage of the read set is at least 75×, the throughput of the new method is at least 20% higher.

conda install -c atgc-montpellier lorma

Address of the bookmark: https://gite.lirmm.fr/lorma/lorma-releases/wikis/home