BOL: Related items

Illuminating next generation sequencing data with Go

Rahul Agarwal — Fri, 23 Aug 2013 07:13:33 -0500

Another good lecture for Illumina sequencing data analysis from

Dan Kortschak, Bioinformatics Group, School of Molecular and Biomedical Science ,The University of Adelaide

Address of the bookmark: http://talks.biogo.googlecode.com/git/illumination/illumination.pdf

PAired-eND Assembler for DNA sequences

Neel — Wed, 06 Apr 2016 05:25:34 -0500

PANDASEQ is a program to align Illumina reads, optionally with PCR primers embedded in the sequence, and reconstruct an overlapping sequence.

More at https://github.com/neufeld/pandaseq

Address of the bookmark: https://github.com/neufeld/pandaseq

PANDASEQ

Shruti Paniwala — Mon, 23 Jan 2017 04:54:32 -0600

PANDASEQ assembles paired-end Illumina reads into sequences, trying to correct for errors and uncalled bases. The assembler reads two files in FASTQ format with quality information. If amplification primers were used (e.g., to isolate a variable region of the 16S gene, or the constant regions around zinc finger binding residues), they can be removed from the sequence during assembly. The final sequence will correct any uncalled bases in the overlapping region using the complementary strand. When mismatches occur in the overlapping region, the base with the better quality score is chosen.
The algorithm is as follows:

1.Find the positions where the forward and reverse primers match best above the threshold and discard the ends of the sequence, including the primer.
2.Pick and overlap to maximise the probability of the forward and reverse reads having come from a single piece of DNA.
3.Identify the masking of the end of the read with the quality score B or # as done by CASAVA and adjust the probabilities in this region.
4.Construct an assembled sequence between the primers and calculate the quality.
5.Check for various constraints, including quality, length, uncalled bases, and user-supplied modules.

http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

Address of the bookmark: http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

Illumina to Acquire Pacific Biosciences for Approximately $1.2 Billion !

Rahul Nayak — Fri, 02 Nov 2018 09:57:48 -0500

Illumina and Pacific Biosciences announced they have signed an agreement for Illumina to acquire Pacific Biosciences at a price of $8.00 per Pacific Biosciences share in an all-cash transaction.

The agreement has been approved by the board of directors of Illumina and Pacific Biosciences. The acquisition complements Illumina sequencing solutions with accurate long-read sequencing capabilities to answer a set of complex genomic questions. While Illumina's accurate and economic short-read sequencing platforms address the majority of sequencing applications optimally, select applications, such as de novo sequencing and sequencing of highly homologous regions of genomes, are better addressed with accurate long-reads.

Reference https://www.pacb.com/press_releases/illumina-to-acquire-pacific-biosciences-for-approximately-1-2-billion-broadening-access-to-long-read-sequencing-and-accelerating-scientific-discovery/

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

Reference-free prediction of rearrangement breakpoint reads

Neel — Thu, 08 Mar 2018 05:05:25 -0600

lideSort-BPR ( b reak p oint r eads) is based on a fast algorithm for all-against-all comparisons of short reads and theoretical analyses of the number of neighboring reads. When applied to a dataset with a sequencing depth of 100×, it finds ∼88% of the breakpoints correctly with no false-positive reads. Moreover, evaluation on a real prostate cancer dataset shows that the proposed method predicts more fusion transcripts correctly than previous approaches, and yet produces fewer false-positive reads. To our knowledge, this is the first method to detect breakpoint reads without using a reference genome.

https://github.com/ewijaya/slidesort-bpr

Address of the bookmark: https://code.google.com/archive/p/slidesort-bpr/

MECAT: fast mapping, error correction, and de novo assembly for single-molecule sequencing reads

Rahul Nayak — Fri, 11 May 2018 05:07:45 -0500

MECAT is an ultra-fast Mapping, Error Correction and de novo Assembly Tools for single molecula sequencing (SMRT) reads. MECAT employs novel alignment and error correction algorithms that are much more efficient than the state of art of aligners and error correction tools. MECAT can be used for effectively de novo assemblying large genomes. For example, on a 32-thread computer with 2.0 GHz CPU , MECAT takes 9.5 days to assemble a human genome based on 54x SMRT data, which is 40 times faster than the current PBcR-Mhap pipeline. MECAT performance were compared with PBcR-Mhap pipeline, FALCON and Canu(v1.3) in five real datasets. The quality of assembled contigs produced by MECAT is the same or better than that of the PBcR-Mhap pipeline and FALCON.

https://www.nature.com/articles/nmeth.4432

Address of the bookmark: https://github.com/xiaochuanle/MECAT

Jvarkit : Java utilities for Bioinformatics

Jit — Fri, 08 Jun 2018 09:31:55 -0500

Collection of Java tool kits for bioinformatics works: Jvarkit : Java utilities for Bioinformatics

Address of the bookmark: http://lindenb.github.io/jvarkit/

Porechop: tool for finding and removing adapters from Oxford Nanopore reads

Rahul Nayak — Tue, 29 May 2018 07:33:44 -0500

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

Address of the bookmark: https://github.com/rrwick/Porechop

Breakpointer: using local mapping artifacts to support sequence breakpoint discovery from single-end reads

Jit — Tue, 12 Jun 2018 12:41:10 -0500

Breakpointer is a fast tool for locating sequence breakpoints from the alignment of single end reads (SE) produced by next generation sequencing (NGS). It adopts a heuristic method in searching for local mapping signatures created by insertion/deletions (indels) or more complex structural variants(SVs).

Address of the bookmark: https://github.com/ruping/Breakpointer