BOL: Related items

PAired-eND Assembler for DNA sequences

Neel — Wed, 06 Apr 2016 05:25:34 -0500

PANDASEQ is a program to align Illumina reads, optionally with PCR primers embedded in the sequence, and reconstruct an overlapping sequence.

More at https://github.com/neufeld/pandaseq

Address of the bookmark: https://github.com/neufeld/pandaseq

PANDASEQ

Shruti Paniwala — Mon, 23 Jan 2017 04:54:32 -0600

PANDASEQ assembles paired-end Illumina reads into sequences, trying to correct for errors and uncalled bases. The assembler reads two files in FASTQ format with quality information. If amplification primers were used (e.g., to isolate a variable region of the 16S gene, or the constant regions around zinc finger binding residues), they can be removed from the sequence during assembly. The final sequence will correct any uncalled bases in the overlapping region using the complementary strand. When mismatches occur in the overlapping region, the base with the better quality score is chosen.
The algorithm is as follows:

1.Find the positions where the forward and reverse primers match best above the threshold and discard the ends of the sequence, including the primer.
2.Pick and overlap to maximise the probability of the forward and reverse reads having come from a single piece of DNA.
3.Identify the masking of the end of the read with the quality score B or # as done by CASAVA and adjust the probabilities in this region.
4.Construct an assembled sequence between the primers and calculate the quality.
5.Check for various constraints, including quality, length, uncalled bases, and user-supplied modules.

http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

Address of the bookmark: http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

Illumina to Acquire Pacific Biosciences for Approximately $1.2 Billion !

Rahul Nayak — Fri, 02 Nov 2018 09:57:48 -0500

Illumina and Pacific Biosciences announced they have signed an agreement for Illumina to acquire Pacific Biosciences at a price of $8.00 per Pacific Biosciences share in an all-cash transaction.

The agreement has been approved by the board of directors of Illumina and Pacific Biosciences. The acquisition complements Illumina sequencing solutions with accurate long-read sequencing capabilities to answer a set of complex genomic questions. While Illumina's accurate and economic short-read sequencing platforms address the majority of sequencing applications optimally, select applications, such as de novo sequencing and sequencing of highly homologous regions of genomes, are better addressed with accurate long-reads.

Reference https://www.pacb.com/press_releases/illumina-to-acquire-pacific-biosciences-for-approximately-1-2-billion-broadening-access-to-long-read-sequencing-and-accelerating-scientific-discovery/

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads

Jit — Wed, 07 Jun 2017 04:18:16 -0500

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads http://www.nature.com/ncomms/2016/160415/ncomms11307/full/ncomms11307.html

Features

    Mapping position agnostic to alignment parameters.
    Consistently very high sensitivity and precision across different error profiles, rates and sequencing technologies even with default parameters.
    Circular genome handling to resolve coverage drops near ends of the genome.
    E-value.
    Meaningful mapping quality.
    Various alignment strategies (semiglobal bit-vector and Gotoh, anchored).
    Overlapping of reads for de novo assembly.
    Transcriptome mapping through internal construction of a transcriptome from a given genomic reference and a GTF file.
    ...and much more.

GraphMap is also used as an overlapper in a new de novo genome assembly project called Ra (https://github.com/mariokostelac/ra-integrate).
Ra attempts to create de novo assemblies from raw nanopore and PacBio reads without requiring error correction, for which a highly sensitive overlapper is required.

Currently, development of a new spliced-alignment mode for mapping RNA-seq reads is under way.
Description of the current effort as well as how to reach the experimental implementation can be found here: doc/rnaseq.md.

Address of the bookmark: https://github.com/isovic/graphmap

MashMap: a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s)

Jit — Tue, 12 Dec 2017 17:23:31 -0600

MashMap is a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s). It maps a query sequence against a reference region if and only if its estimated alignment identity is above a specified threshold. It does not compute the alignments explicitly, but rather estimates a k-mer based Jaccard similarity using a combination of Winnowing and MinHash. This is then converted to an estimate of sequence identity using the Mash distance. An appropriate k-mer sampling rate is automatically determined given minimum local alignment length and identity thresholds. The efficiency of the algorithm improves as both of these thresholds are increased.

Address of the bookmark: https://github.com/marbl/MashMap

ALPACA: A hybrid strategy for assembly of genomic DNA shotgun sequencing reads.

Seema Singh — Mon, 30 Apr 2018 04:38:40 -0500

ALPACA requires Celera Assembler 8.3 or later. It is recommended to build Celera Assembler from source. (Why? The pre-built binaries CA_8.3rc1 and CA8.3rc2 will work for any large data set.

Detail paper at https://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-017-3927-8

Address of the bookmark: https://github.com/VicugnaPacos/ALPACA

TAREAN: A computational tool for identification and characterization of satellite DNA from unassembled short reads

Surabhi Chaudhary — Tue, 15 May 2018 02:53:11 -0500

TAndem REpeat ANalyzer -TAREAN – is a computational pipeline for unsupervised identification of satellite repeats from unassembled sequence reads. The pipeline uses low-pass whole genome sequence reads and performs their graph-based clustering. Resulting clusters, representing all types of repeats, are then examined for the presence of circular structures and putative satellite repeats are reported.

How to use TAREAN:

Install a local instance of the pipeline using its source code available from bitbucket repository.
Use public Galaxy-based server at https://repeatexplorer-elixir.cerit-sc.cz/. The server is provided in frame of the Elixir CZ project and is maintained by CESNET and CERIT-SC. Simple registration is required to use this service.

Development of TAREAN was supported by ELIXIR CZ research infrastructure project (MEYS Grant No: LM2015047).

References

Novak, P., Avila Robledillo, L., Koblizkova, A., Vrbova, I., Neumann, P., Macas, J. (2017) – TAREAN: a computational tool for identification and characterization of satellite DNA from unassembled short reads. Nucleic Acids Res., doi:10.1093/nar/gkx257

Address of the bookmark: https://bitbucket.org/petrnovak/repex_tarean

BlasR Mapping single molecule sequencing reads using Basic Local Alignment with Successive Refinement (BLASR): Theory and Application,

Jit — Wed, 23 May 2018 06:54:32 -0500

BLASR (Basic Local Alignment with Successive Refinement) for mapping Single Molecule Sequencing (SMS) reads that are thousands to tens of thousands of bases long with divergence between the read and genome dominated by insertion and deletion error.

Here is how I use the blasr to align PacBio reads to the contigs (target.fasta). The “target.fasta.sa” is the suffix array from “target.fasta” generated by sawriter.

blasr query.fa ./target.fasta -sa ./target.fasta.sa -bestn 40 -maxScore -500 -m 4 -nproc 24 -out target.m4 -maxLCPLength 15

the output format option “-m 4″ generate the alignment coordinate. Not fully documented, but I can explain that to you.

I use a 24 cores / 48G ram server for the alignment. It took about 2 to 3 hours aligning 3G PacBio Reads to 10^6 sequences of short read contigs with a mean 3.5kbp length.

Address of the bookmark: http://bix.ucsd.edu/projects/blasr/

Porechop: tool for finding and removing adapters from Oxford Nanopore reads

Rahul Nayak — Tue, 29 May 2018 07:33:44 -0500

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

Address of the bookmark: https://github.com/rrwick/Porechop

npScarf: real-time scaffolder using SPAdes contigs and Nanopore sequencing reads

Shruti Paniwala — Mon, 11 Jun 2018 05:14:57 -0500

npScarf (jsa.np.npscarf) is a program that connect contigs from a draft genomes to generate sequences that are closer to finish. These pipelines can run on a single laptop for microbial datasets. In real-time mode, it can be integrated with simple structural analyses such as gene ordering, plasmid forming.

Address of the bookmark: http://japsa.readthedocs.io/en/latest/tools/jsa.np.npscarf.html